1. 21 Aug, 2012 1 commit
  2. 14 Aug, 2012 2 commits
    • Deb Mukherjee's avatar
      Some build fixes · 32fe72eb
      Deb Mukherjee authored
      Fixes two typos that breaks the build introduced in recent check-ins.
      
      Change-Id: I3f15f3c088c48a63fede8941c9a4ba05dd0403c2
      32fe72eb
    • Paul Wilkins's avatar
      Code clean up. · 39892cce
      Paul Wilkins authored
      References to MACROBLOCKD that use "x" changed to "xd"
      to comply with convention elsewhere that x = MACROBLOCK
      and xd = MACROBLOCKD.
      
      Simplify some repeat references using local variables.
      
      Change-Id: I0ba2e79536add08140a6c8b19698fcf5077246bc
      39892cce
  3. 03 Aug, 2012 2 commits
    • Jingning Han's avatar
      Replacing the 8x8 DCT with 8x8 ADST/DCT for I8x8 · fcbff9ee
      Jingning Han authored
      Fixed the code review comments.
      
      Under the htrans8x8 experiment the 8X8 DCT in the
      I8X8 mode is replaced with a combination of 8X8 ADST and
      DCT.
      
      Overall coding gains with the htrans8x8 experiment are:
      derf:   0.486
      std-hd: 1.040
      hd:     1.063
      yt:     0.506
      
      Note that part of the gain comes from bigger transforms
      (8x8 instead of 4x4) and part comes from replacing the DCT
      wth the ADST.
      
      Change-Id: I92ca6bbfce11b4165d612b81d9adfad4d010c775
      fcbff9ee
    • Daniel Kang's avatar
      16x16 DCT blocks. · fed8a183
      Daniel Kang authored
      Set on all 16x16 intra/inter modes
      
      Features:
      - Butterfly fDCT/iDCT
      - Loop filter does not filter internal edges with 16x16
      - Optimize coefficient function
      - Update coefficient probability function
      - RD
      - Entropy stats
      - 16x16 is a config option
      
      Have not tested with experiments.
      
      hd:     2.60%
      std-hd: 2.43%
      yt:     1.32%
      derf:   0.60%
      
      Change-Id: I96fb090517c30c5da84bad4fae602c3ec0c58b1c
      fed8a183
  4. 02 Aug, 2012 1 commit
    • Jingning Han's avatar
      Use 8x8 DCT transform for I8X8 prediction mode · c7846ebc
      Jingning Han authored
      Apply 2D-DCT transform of dimension 8x8 to encode prediction
      residuals of I8X8 mode.
      Brought back block type 3 probability context model for 8x8 tokens,
      which is used for the coefficients of Y blocks in I8x8 modes. The
      coefficient costs estimate of I8X8 mode in rate-distortion is also
      changed appropriately.
      Performance results:
      derf:   0.246
      yt:     0.114
      std-hd: 0.730
      hd:     0.670
      
      Change-Id: If1d970eeb4e1827c9f0d2c5b27d33089b347ea27
      c7846ebc
  5. 27 Jul, 2012 1 commit
    • Deb Mukherjee's avatar
      Merges several experiments · 9984a155
      Deb Mukherjee authored
      The following five experiments are merged:
      
      newentropy
      newupdate
      adaptive_entropy (also includes a couple of parameter changes
                        that improves results a little
                        in common/entropymode.c and encoder/modecosts.c
                        that were not merged from the internal branch)
      newintramodes
      expanded_coef_context
      
      Change-Id: I8a142a831786ee9dc936f22be1d42a8bced7d270
      9984a155
  6. 19 Jul, 2012 1 commit
    • Jingning Han's avatar
      Adds hybrid transform · 9824230f
      Jingning Han authored
      Adds ADST/DCT hybrid transform coding for Intra4x4 mode.
      The ADST is applied to directions in which the boundary
      pixels are used for prediction, while DCT applied to
      directions without corresponding boundary prediction.
      
      Adds enum TX_TYPE in b_mode_infor to indicate the transform
      type used.
      
      Make coding style consistent with google style.
      Fixed the commented issues.
      
      Experimental results in terms of bit-rate reduction:
      derf:   0.731%
      yt:     0.982%
      std-hd: 0.459%
      hd:     0.725%
      
      Will be looking at 8x8 transforms next.
      
      Change-Id: I46dbd7b80dbb3e8856e9c34fbc58cb3764a12fcf
      9824230f
  7. 17 Jul, 2012 1 commit
  8. 16 Jul, 2012 2 commits
  9. 15 Jun, 2012 1 commit
    • Deb Mukherjee's avatar
      Adaptive entropy coding of coefficients, modes, mv. · 1fe85a35
      Deb Mukherjee authored
      This patch incorporates adaptive entropy coding of coefficient tokens,
      and mode/mv information based on distributions encountered in a frame.
      Specifically, there is an initial forward update to the probabilities
      in the bitstream as before for coding the symbols in the frame, however
      at the end of decoding each frame, the forward update to the
      probabilities is reverted and instead the probabilities are updated
      towards the actual distributions encountered within the frame.
      The amount of update is weighted by the number of hits within each
      context.
      
      Results on derf/hd/std-hd are all up by 1.6%.
      
      On derf, the most of the gains come from coefficients, however for the
      hd and std-hd sets, the most of the gains come from the mode/mv
      information updates.
      
      Change-Id: I708c0e11fdacafee04940fe7ae159ba6844005fd
      1fe85a35
  10. 04 May, 2012 1 commit
  11. 02 May, 2012 1 commit
  12. 21 Mar, 2012 1 commit
  13. 15 Mar, 2012 1 commit
    • Yaowu Xu's avatar
      WebM Experimental Codec Branch Snapshot · 6035da54
      Yaowu Xu authored
      This is a code snapshot of experimental work currently ongoing for a
      next-generation codec.
      
      The codebase has been cut down considerably from the libvpx baseline.
      For example, we are currently only supporting VBR 2-pass rate control
      and have removed most of the code relating to coding speed, threading,
      error resilience, partitions and various other features.  This is in
      part to make the codebase easier to work on and experiment with, but
      also because we want to have an open discussion about how the bitstream
      will be structured and partitioned and not have that conversation
      constrained by past work.
      
      Our basic working pattern has been to initially encapsulate experiments
      using configure options linked to #IF CONFIG_XXX statements in the
      code. Once experiments have matured and we are reasonably happy that
      they give benefit and can be merged without breaking other experiments,
      we remove the conditional compile statements and merge them in.
      
      Current changes include:
      * Temporal coding experiment for segments (though still only 4 max, it
        will likely be increased).
      * Segment feature experiment - to allow various bits of information to
        be coded at the segment level. Features tested so far include mode
        and reference frame information, limiting end of block offset and
        transform size, alongside Q and loop filter parameters, but this set
        is very fluid.
      * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used
        in MBs using 16x16 prediction modes within inter frames.
      * Compound prediction (combination of signals from existing predictors
        to create a new predictor).
      * 8 tap interpolation filters and 1/8th pel motion vectors.
      * Loop filter modifications.
      * Various entropy modifications and changes to how entropy contexts and
        updates are handled.
      * Extended quantizer range matched to transform precision improvements.
      
      There are also ongoing further experiments that we hope to merge in the
      near future: For example, coding of motion and other aspects of the
      prediction signal to better support larger image formats, use of larger
      block sizes (e.g. 32x32 and up) and lossless non-transform based coding
      options (especially for key frames). It is our hope that we will be
      able to make regular updates and we will warmly welcome community
      contributions.
      
      Please be warned that, at this stage, the codebase is currently slower
      than VP8 stable branch as most new code has not been optimized, and
      even the 'C' has been deliberately written to be simple and obvious,
      not fast.
      
      The following graphs have the initial test results, numbers in the
      tables measure the compression improvement in terms of percentage. The
      build has  the following optional experiments configured:
      --enable-experimental --enable-enhanced_interp --enable-uvintra
      --enable-high_precision_mv --enable-sixteenth_subpel_uv
      
      CIF Size clips:
      http://getwebm.org/tmp/cif/
      HD size clips:
      http://getwebm.org/tmp/hd/
      (stable_20120309 represents encoding results of WebM master branch
      build as of commit#7a159071)
      
      They were encoded using the following encode parameters:
      --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63
      --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999
      --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50
      --minsection-pct=0 --maxsection-pct=800 --sharpness=0
      --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF)
      --arnr-type=3
      
      Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
      6035da54
  14. 05 Mar, 2012 1 commit
    • Yaowu Xu's avatar
      Changed how UV r/d estimates are done for Intra Modes · 6898e8b7
      Yaowu Xu authored
      The commit changed to compute UV intra RD estimates for 4x4 and 8x8
      separately to be used in mode decision for MB modes associated with
      the appropriate transform size respectively. Now finally after many
      other changes related 8x8 quantizer zbin boost and zbin_mode_boost,
      this change overall helps the HD(with 8x8) by around ~.13%.
      (avg .13%  glb .13% ssim .17%)
      
      The commit also has a few changes for eliminating compiler warnings.
      
      Change-Id: Ibab35dad44820c87e6b44799c66f8d519cc37344
      6898e8b7
  15. 01 Mar, 2012 1 commit
  16. 16 Feb, 2012 1 commit
    • Yaowu Xu's avatar
      Reworked context conversion between 8x8 and 4x4 · b92a96d8
      Yaowu Xu authored
      The commit rationized and simplified the entropy context conversion
      betwen MB using 8x8 transform and MB using 4x4 transform. The old version
      had a number of weirdness in how 4x4 transform MB's context is used for
      8x8 blocks other than the first 8x8 within a MB.
      
      Test showed the change has a gain ~.1% for avg psnr, glb psnr and ssim on
      the limited HD set.
      
      Change-Id: I774536c416baa6845aa741f956d8a69fa40e5d47
      b92a96d8
  17. 13 Feb, 2012 1 commit
  18. 10 Feb, 2012 2 commits
    • Yaowu Xu's avatar
      fixed an issue related to 2nd order size due to merge artifacts. · 9ded6e37
      Yaowu Xu authored
      For 8x8 transformed macroblock, the 2nd order transform is a 2x2 haar
      transform, here there is only 4 coefficients total. A previous merge
      changed these to 64, causing crashes when encoding with 8x8 transform
      enabled. (i.e. when input video image size > 640x360 ) This commit
      reverts them back to 4 and fixes the crashes.
      
      Change-Id: I3290b81f8c0d32c7efec03093a61ea57736c0550
      9ded6e37
    • Ronald S. Bultje's avatar
      Improved coding using 8x8 transform · f64725a0
      Ronald S. Bultje authored
      In summary, this commit encompasses a series of changes in attempt to
      improve the 8x8 transform based coding to help overall compression
      quality, please refer to the detailed commit history below for what
      are the rationale underly the series of changes:
      
      a. A frame level flag to indicate if 8x8 transform is used at all.
      b. 8x8 transform is not used for key frames and small image size.
      c. On inter coded frame, macroblocks using modes B_PRED, SPLIT_MV
      and I8X8_PRED are forced to using 4x4 transform based coding, the
      rest uses 8x8 transform based coding.
      d. Encoder and decoder has the same assumption on the relationship
      between prediction modes and transform size, therefore no signaling
      is encoded in bitstream.
      e. Mode decision process now calculate the rate and distortion scores
      using their respective transforms.
      
      Overall test results:
      1. HD set
      http://www.corp.google.com/~yaowu/no_crawl/t8x8/HD_t8x8_20120206.html
      (avg psnr: 3.09% glb psnr: 3.22%, ssim: 3.90%)
      2. Cif set:
      http://www.corp.google.com/~yaowu/no_crawl/t8x8/cif_t8x8_20120206.html
      (avg psnr: -0.03%, glb psnr: -0.02%, ssim: -0.04%)
      It should be noted here, as 8x8 transform coding itself is disabled
      for cif size clips, the 0.03% loss is purely from the 1 bit/frame
      flag overhead on if 8x8 transform is used or not for the frame.
      
      ---patch history for future reference---
      Patch 1:
      this commit tries to select transform size based on macroblock
      prediction mode. If the size of a prediction mode is 16x16, then
      the macroblock is forced to use 8x8 transform. If the prediction
      mode is B_PRED, SPLITMV or I8X8_PRED, then the macroblock is forced
      to use 4x4 transform. Tests on the following HD clips showed mixed
      results: (all hd clips only used first 100 frames in the test)
      
      http://www.corp.google.com/~yaowu/no_crawl/t8x8/hdmodebased8x8.html
      http://www.corp.google.com/~yaowu/no_crawl/t8x8/hdmodebased8x8_log.html
      
      while the results are mixed and overall negative, it is interesting to
      see 8x8 helped a few of the clips.
      
      Patch 2:
      this patch tries to hard-wire selection of transform size based on
      prediction modes without using segmentation to signal the transform size.
      encoder and decoder both takes the same assumption that all macroblocks
      use 8x8 transform except when prediciton mode is B_PRED, I8X8_PRED or
      SPLITMV. Test results are as follows:
      
      http://www.corp.google.com/~yaowu/no_crawl/t8x8/cifmodebase8x8_0125.html
      http://www.corp.google.com/~yaowu/no_crawl/t8x8/hdmodebased8x8_0125log.html
      
      Interestingly, by removing the overhead or coding the segmentation, the
      results on this limited HD set have turn positive on average.
      
      Patch 3:
      this patch disabled the usage of 8x8 transform on key frames, and kept the
      logic from patch 2 for inter frames only. test results on HD set turned
      decidedly positive with 8x8 transform enabled on inter frame with 16x16
      prediction modes: (avg psnr: .81% glb psnr: .82 ssim: .55%)
      
      http://www.corp.google.com/~yaowu/no_crawl/t8x8/hdintermode8x8_0125.html
      results on cif set still negative overall
      
      Patch 4:
      continued from last patch, but now in mode decision process, the rate and
      distortion estimates are computed based on 8x8 transform results for MBs
      with modes associated with 8x8 transform. This patch also fixed a problem
      related to segment based eob coding when 8x8 transform is used. The patch
      significantly improved the results on HD clips:
      
      http://www.corp.google.com/~yaowu/no_crawl/t8x8/hd8x8RDintermode.html
      (avg psnr: 2.70% glb psnr: 2.76% ssim: 3.34%)
      results on cif also improved, though they are still negative compared to
      baseline that uses 4x4 transform only:
      http://www.corp.google.com/~yaowu/no_crawl/t8x8/cif8x8RDintermode.html
      (avg psnr: -.78% glb psnr: -.86% ssim: -.19%)
      
      Patch 5:
      This patch does 3 things:
      a. a bunch of decoder bug fixes, encodings and decodings were verified
      to have matched recon buffer on a number of encodes on cif size mobile and
      hd version of _pedestrian.
      b. the patch further improved the rate distortion calculation of MBS that
      use 8x8 transform. This provided some further gain on compression.
      c. the patch also got the experimental work SEG_LVL_EOB to work with 8x8
      transformed macroblock, test results indicates it improves the cif set
      but hurt the HD set slightly.
      
      Tests results on HD clips:
      http://www.corp.google.com/~yaowu/no_crawl/t8x8/HD_t8x8_20120201.html
      (avg psnr: 3.19% glb psnr: 3.30% ssim: 3.93%)
      
      Test results on cif clips:
      http://www.corp.google.com/~yaowu/no_crawl/t8x8/cif_t8x8_20120201.html
      (avg psnr: -.47% glb psnr: -.51% ssim: +.28%)
      
      Patch 6:
      Added a frame level flag to indicate if 8x8 transform is allowed at all.
      temporarily the decision is based on frame size, can be optimized later
      one. This get the cif results to basically unchanged, with one bit per
      frame overhead on both cif and hd clips.
      
      Patch 8:
      Rebase and Merge to head by PGW.
      Fixed some suspect 4s that look like hey should be 64s in regard
      to segmented EOB. Perhaps #defines would be bette.
      Bulit and tested without T8x8 enabled and produces unchanged
      output.
      
      Patch 9:
      Corrected misalligned code/decode of "txfm_mode" bit.
      Limited testing for correct encode and decode with
      T8x8 configured on derf clips.
      
      Change-Id: I156e1405d25f81579d579dff8ab9af53944ec49c
      f64725a0
  19. 09 Feb, 2012 2 commits
  20. 07 Dec, 2011 1 commit
    • Yaowu Xu's avatar
      Removed #if CONFIG_I8X8 · d37cd976
      Yaowu Xu authored
      This commit removed the macro CONFIG_I8X8, which was used to indicate
      the 8x8 intra prediction experiment, made the change fully merged in.
      
      Change-Id: Iafa4443781ce6e83f5591c12ba615a0e92ce0ea0
      d37cd976
  21. 02 Dec, 2011 1 commit
    • Yaowu Xu's avatar
      enabled 8x8 intra prediction modes on inter frames · a8fbab86
      Yaowu Xu authored
      This commit enabled the usage of 8x8 intra prediction modes on inter
      frames. There are a few TODO items related to this: 1)baseline entropy
      need be calibrated; 2)cost of UV need to be done more properly rather
      than using decision only relying on Y; 3)Threshold for allowing picking
      8x8 intra prediction should be lowered to lower than the B_PRED.
      
      Even with all the TODOs, tests showed consistent gain on derf set ~0.1%
      (PSNR:0.08% and SSIM:0.14%). It is assumed that 8x8 intra prediction
      will help more on large resolution clips, especially with above TODOs
      addressed.
      
      Change-Id: I398ada49dfc32575cfab962a569c2885111ae3ba
      a8fbab86
  22. 04 Nov, 2011 1 commit
    • Paul Wilkins's avatar
      Segment Feature Data Access · a258bba1
      Paul Wilkins authored
      No change to functionality or output.
      
      Updates to the segment feature data structure now all done
      through functions such as set_segdata() and get_segdata()
      in seg_common.c.
      
      The reason for this is to make changing the structures (if needed)
      and debug easier.
      
      In addition it provides a single location for subsequent addition
      of range and validity checks. For  example valid combination of
      mode and reference frame.
      
      Change-Id: I2e866505562db4e4cb6f17a472b25b4465f01add
      a258bba1
  23. 03 Nov, 2011 1 commit
    • Paul Wilkins's avatar
      Segment Features. Removal of #ifdefs · a10a268e
      Paul Wilkins authored
      Removal of configure #ifdefs so that segment features
      always available. Removal of code supporting old
      segment feature method.
      
      Still a good deal of tidying up to do.
      
      Change-Id: I397855f086f8c09ab1fae0a5f65d9e06d2e3e39f
      a10a268e
  24. 24 Oct, 2011 1 commit
    • Paul Wilkins's avatar
      Further segment feature extensions. · 01ce04bc
      Paul Wilkins authored
      This quite large check in includes the following:
      
      Merge in some code from Ronald (mbgraph.c) that scans a Gf/arf group.
      This is used as a basis for a simple segmentation for the normal frames
      in a gf/arf group. This code also uses satd functions from Yaowu.
      
      Adds functionality for coding the latest possible position of an EOB for
      blocks in the segment. (Currently 0-15 only, hence just for 4x4 dct).
      Where the EOB position is 0 this acts like "skip" and the normal coding
      of skip at the per mb level is disabled.
      
      Added functions (seg_common.c) for setting and reading segment feature
      elements. These may want to be optimized away at some point but while the
      mecahnism is in a state of flux they provide a single location for making
      changes and keep things a bit cleaner.
      
      This is still proof of concept code. Currently the tested feature set:-
      
      Quantizer,
      Loop Filter level,
      Reference frame,
      Prediction Mode,
      EOB end stop.
      
      TBD:-
      
      Add functions for setting and reading the feature data with range
      and validity checking.
      
      Handling of signed and unsigned feature data. At the moment all is assumed
      to be signed and a sign bit is coded but many cannot be negative.
      
      Correct handling of EOB feature with intra coded blocks.
      
      Testing/trapping of legal/illegal ref frame and mode combinations.
      
      Transform size switch plus merge and test with 8c8 DCT work
      
      Merge and test with Sumans Segmenation coding optimizations
      
      Change-Id: Iee12e83661c7abbd1e0ce6810915eb4ec35e2d8e
      01ce04bc
  25. 30 Sep, 2011 1 commit
  26. 16 Sep, 2011 1 commit
    • Yaowu Xu's avatar
      add 8x8 intra prediction modes · ca6b85aa
      Yaowu Xu authored
      Patch 1 to Patch 3 is an initial implementation of 8x8 intra prediction
      modes, here are with the following assumptions:
      a. 8x8 has 4 prediction modes DC, H, V and TM
      b. UV 4x4 block use the same mode as corresponding 8x8 area
      c. i8x8 modes are enabled for key frame only for now
      Patch 4:
      d. removed debug code from previous patches
      Patch 5:
      e. added stats code to collect entropy stats and further cleaned up
      Patch 6:
      f. changed mode stats code to collect finer stats of modes
      Patch 7:
      g. normalized i8x8 modes distribution to total at 256 (8bits).
      Patch 8:
      h. fixed a bug in decoder and removed debug printf output.
      Patch 9:
      i. more cleanups to address paul's comment
      Patch 10:
      j. messy rebase/merges to bring the commit up to date.
      
      Tests on HD clips encoded with all key frame showing consistent gain
      on all clips and all metrics:~0.5%(psnr) and 0.6%(ssim):
      http://www.corp.google.com/~yaowu/no_crawl/i8x8hd_allkey_fixedq.html
      
      To build and test, configure with:
      --enable-experimental --enable-i8x8
      
      Change-Id: I9813fe07ae48cab5fdb5d904bca022514ad01e7f
      ca6b85aa
  27. 03 Sep, 2011 1 commit
    • Yaowu Xu's avatar
      fixed a decoder bug · 1fa77e28
      Yaowu Xu authored
      the bug appears to be introduced from a merge at Commit:62400028..
      
      Change-Id: I332d78b673f12e5ef2b0cdd6bab57dc2c8af7a72
      1fa77e28
  28. 26 Jul, 2011 1 commit
  29. 25 Jul, 2011 1 commit
  30. 21 Jul, 2011 1 commit
    • Yaowu Xu's avatar
      fix more merge issues · 8c31484e
      Yaowu Xu authored
      With this fix, the experimental branch now builds and encodes correctly
      with the following two configure options respectively:
      --enable-experimental --enable-t8x8
      --enable-experimental
      
      Change-Id: I3147c33c503fe713a85fd371e4f1a974805778bf
      8c31484e
  31. 20 Jul, 2011 1 commit
  32. 19 Jul, 2011 1 commit
    • Scott LaVarnway's avatar
      Moved vp8_encode_bool into boolhuff.h · a25f6a9c
      Scott LaVarnway authored
      allowing the compiler to inline this function.  For real-time
      encodes, this gave a boost of 1% to 2.5%, depending on the
      speed setting.
      
      Change-Id: I3929d176cca086b4261267b848419d5bcff21c02
      a25f6a9c
  33. 15 Apr, 2011 1 commit
    • Johann's avatar
      remove executable bit · f64f425a
      Johann authored
      source files are not executable
      
      Change-Id: Id2c7294695a22217468426423979f68f02d82340
      f64f425a
  34. 04 Apr, 2011 1 commit
  35. 18 Mar, 2011 1 commit
    • John Koleszar's avatar
      Increase static linkage, remove unused functions · 429dc676
      John Koleszar authored
      A large number of functions were defined with external linkage, even
      though they were only used from within one file. This patch changes
      their linkage to static and removes the vp8_ prefix from their names,
      which should make it more obvious to the reader that the function is
      contained within the current translation unit. Functions that were
      not referenced were removed.
      
      These symbols were identified by:
      
        $ nm -A libvpx.a | sort -k3 | uniq -c -f2 | grep ' [A-Z] ' \
          | sort | grep '^ *1 '
      
      Change-Id: I59609f58ab65312012c047036ae1e0634f795779
      429dc676