Commit 787970a6 authored by Johann Koenig's avatar Johann Koenig Committed by Gerrit Code Review

Merge "quantize test: add speed comparison"

parents b9577e07 1059b5cc
......@@ -25,6 +25,7 @@
#include "vp9/common/vp9_scan.h"
#include "vpx/vpx_codec.h"
#include "vpx/vpx_integer.h"
#include "vpx_ports/vpx_timer.h"
using libvpx_test::ACMRandom;
using libvpx_test::Buffer;
......@@ -349,6 +350,79 @@ TEST_P(VP9Quantize32Test, EOBCheck) {
}
}
}
TEST_P(VP9QuantizeTest, DISABLED_Speed) {
ACMRandom rnd(ACMRandom::DeterministicSeed());
Buffer<tran_low_t> coeff = Buffer<tran_low_t>(16, 16, 0, 16);
ASSERT_TRUE(coeff.Init());
DECLARE_ALIGNED(16, int16_t, zbin_ptr[8]);
DECLARE_ALIGNED(16, int16_t, round_ptr[8]);
DECLARE_ALIGNED(16, int16_t, quant_ptr[8]);
DECLARE_ALIGNED(16, int16_t, quant_shift_ptr[8]);
DECLARE_ALIGNED(16, int16_t, dequant_ptr[8]);
Buffer<tran_low_t> qcoeff = Buffer<tran_low_t>(16, 16, 0, 32);
ASSERT_TRUE(qcoeff.Init());
Buffer<tran_low_t> dqcoeff = Buffer<tran_low_t>(16, 16, 0, 32);
ASSERT_TRUE(dqcoeff.Init());
uint16_t eob;
// TX_4X4, TX_8X8 TX_16X16
for (TX_SIZE sz = 0; sz < 3; ++sz) {
// skip_block, zbin > coeff, zbin < coeff.
for (int i = 0; i < 3; ++i) {
const int skip_block = i == 0;
// TX_TYPE defines the scan order. That is not relevant to the speed test.
// Pick the first one.
const TX_TYPE tx_type = DCT_DCT;
const scan_order *scan_order = &vp9_scan_orders[sz][tx_type];
const int count = (4 << sz) * (4 << sz); // 16, 64, 256
if (i == 0) {
// zbin values are unused when skip_block == 1.
zbin_ptr[0] = zbin_ptr[1] = 0;
coeff.Set(0);
} else if (i == 1) {
// When |coeff values| are less than zbin the results are 0.
zbin_ptr[0] = zbin_ptr[1] = 100;
coeff.Set(&rnd, -99, 99);
} else if (i == 2) {
zbin_ptr[0] = zbin_ptr[1] = 50;
coeff.Set(&rnd, -500, 500);
}
for (int j = 0; j < 2; j++) {
// Chosen by fair dice roll.
round_ptr[j] = 10;
quant_ptr[j] = -10;
quant_shift_ptr[j] = 10;
dequant_ptr[j] = 10;
}
for (int j = 2; j < 8; j++) {
zbin_ptr[j] = zbin_ptr[1];
round_ptr[j] = round_ptr[1];
quant_ptr[j] = quant_ptr[1];
quant_shift_ptr[j] = quant_shift_ptr[1];
dequant_ptr[j] = dequant_ptr[1];
}
vpx_usec_timer timer;
vpx_usec_timer_start(&timer);
for (int j = 0; j < 100000000 / count; ++j) {
quantize_op_(coeff.TopLeftPixel(), count, skip_block, zbin_ptr,
round_ptr, quant_ptr, quant_shift_ptr,
qcoeff.TopLeftPixel(), dqcoeff.TopLeftPixel(), dequant_ptr,
&eob, scan_order->scan, scan_order->iscan);
}
vpx_usec_timer_mark(&timer);
const int elapsed_time = static_cast<int>(vpx_usec_timer_elapsed(&timer));
if (i == 0) printf("Skip block.\n");
if (i == 1) printf("Bypass calculations.\n");
if (i == 2) printf("Full calculations.\n");
printf("Quantize %dx%d time: %5d ms\n", 4 << sz, 4 << sz,
elapsed_time / 1000);
}
printf("\n");
}
}
using std::tr1::make_tuple;
#if HAVE_SSE2
......@@ -413,4 +487,10 @@ INSTANTIATE_TEST_CASE_P(NEON, VP9QuantizeTest,
&vpx_quantize_b_c,
VPX_BITS_8)));
#endif // HAVE_NEON && !CONFIG_VP9_HIGHBITDEPTH
// Only useful to compare "Speed" test results.
INSTANTIATE_TEST_CASE_P(DISABLED_C, VP9QuantizeTest,
::testing::Values(make_tuple(&vpx_quantize_b_c,
&vpx_quantize_b_c,
VPX_BITS_8)));
} // namespace
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment