Commit 80b344de authored by Johann's avatar Johann

Silence -Werror=unused-parameter

Cast away remaining issues so that new ones don't get lost in the noise.

Change-Id: Iacd6999b0686ce80f9835730d68db6382690fa92
parent ba05a4c6
......@@ -261,6 +261,7 @@ void vp8_loop_filter_row_simple(VP8_COMMON *cm, MODE_INFO *mode_info_context,
int mb_col;
int filter_level;
loop_filter_info_n *lfi_n = &cm->lf_info;
(void)post_uvstride;
for (mb_col = 0; mb_col < cm->mb_cols; mb_col++)
{
......
......@@ -518,6 +518,7 @@ void vp8_plane_add_noise_c(unsigned char *Start, char *noise,
unsigned int Width, unsigned int Height, int Pitch)
{
unsigned int i, j;
(void)bothclamp;
for (i = 0; i < Height; i++)
{
......
......@@ -101,6 +101,8 @@ static void decode_macroblock(VP8D_COMP *pbi, MACROBLOCKD *xd,
int i;
#if CONFIG_ERROR_CONCEALMENT
int corruption_detected = 0;
#else
(void)mb_idx;
#endif
if (xd->mode_info_context->mbmi.mb_skip_coeff)
......
......@@ -591,6 +591,8 @@ static void read_mb_features(vp8_reader *r, MB_MODE_INFO *mi, MACROBLOCKD *x)
static void decode_mb_mode_mvs(VP8D_COMP *pbi, MODE_INFO *mi,
MB_MODE_INFO *mbmi)
{
(void)mbmi;
/* Read the Macroblock segmentation map if it is being updated explicitly
* this frame (reset to 0 above by default)
* By default on a key frame reset all MBs to segment 0
......
......@@ -87,6 +87,7 @@ static struct VP8D_COMP * create_decompressor(VP8D_CONFIG *oxcf)
pbi->ec_enabled = oxcf->error_concealment;
pbi->overlaps = NULL;
#else
(void)oxcf;
pbi->ec_enabled = 0;
#endif
/* Error concealment is activated after a key frame has been
......@@ -303,6 +304,8 @@ int vp8dx_receive_compressed_data(VP8D_COMP *pbi, size_t size,
{
VP8_COMMON *cm = &pbi->common;
int retcode = -1;
(void)size;
(void)source;
pbi->common.error.error_code = VPX_CODEC_OK;
......@@ -407,6 +410,7 @@ int vp8dx_get_raw_frame(VP8D_COMP *pbi, YV12_BUFFER_CONFIG *sd, int64_t *time_st
#if CONFIG_POSTPROC
ret = vp8_post_proc_frame(&pbi->common, sd, flags);
#else
(void)flags;
if (pbi->common.frame_to_show)
{
......
......@@ -96,6 +96,8 @@ static void mt_decode_macroblock(VP8D_COMP *pbi, MACROBLOCKD *xd,
int i;
#if CONFIG_ERROR_CONCEALMENT
int corruption_detected = 0;
#else
(void)mb_idx;
#endif
if (xd->mode_info_context->mbmi.mb_skip_coeff)
......
......@@ -82,6 +82,7 @@ static unsigned int tt_activity_measure( VP8_COMP *cpi, MACROBLOCK *x )
{
unsigned int act;
unsigned int sse;
(void)cpi;
/* TODO: This could also be done over smaller areas (8x8), but that would
* require extensive changes elsewhere, as lambda is assumed to be fixed
* over an entire MB in most of the code.
......@@ -1149,6 +1150,8 @@ static void sum_intra_stats(VP8_COMP *cpi, MACROBLOCK *x)
while (++b < 16);
}
#else
(void)cpi;
#endif
++x->ymode_count[m];
......
......@@ -132,6 +132,7 @@ static void output_stats(const VP8_COMP *cpi,
FIRSTPASS_STATS *stats)
{
struct vpx_codec_cx_pkt pkt;
(void)cpi;
pkt.kind = VPX_CODEC_STATS_PKT;
pkt.data.twopass_stats.buf = stats;
pkt.data.twopass_stats.sz = sizeof(FIRSTPASS_STATS);
......@@ -418,6 +419,7 @@ static void zz_motion_search( VP8_COMP *cpi, MACROBLOCK * x,
int raw_stride = raw_buffer->y_stride;
unsigned char *ref_ptr;
int ref_stride = x->e_mbd.pre.y_stride;
(void)cpi;
/* Set up pointers for this macro block raw buffer */
raw_ptr = (unsigned char *)(raw_buffer->y_buffer + recon_yoffset
......@@ -1409,6 +1411,7 @@ void vp8_init_second_pass(VP8_COMP *cpi)
void vp8_end_second_pass(VP8_COMP *cpi)
{
(void)cpi;
}
/* This function gives and estimate of how badly we believe the prediction
......@@ -1419,6 +1422,7 @@ static double get_prediction_decay_rate(VP8_COMP *cpi, FIRSTPASS_STATS *next_fra
double prediction_decay_rate;
double motion_decay;
double motion_pct = next_frame->pcnt_motion;
(void)cpi;
/* Initial basis is the % mbs inter coded */
prediction_decay_rate = next_frame->pcnt_inter;
......@@ -1547,6 +1551,7 @@ static void accumulate_frame_motion_stats(
double this_frame_mvr_ratio;
double this_frame_mvc_ratio;
double motion_pct;
(void)cpi;
/* Accumulate motion stats. */
motion_pct = this_frame->pcnt_motion;
......
......@@ -888,6 +888,8 @@ int vp8_hex_search
fcenter_mv.as_mv.row = center_mv->as_mv.row >> 3;
fcenter_mv.as_mv.col = center_mv->as_mv.col >> 3;
(void)mvcost;
/* adjust ref_mv to make sure it is within MV range */
vp8_clamp_mv(ref_mv, x->mv_col_min, x->mv_col_max, x->mv_row_min, x->mv_row_max);
br = ref_mv->as_mv.row;
......@@ -911,6 +913,8 @@ int vp8_hex_search
else if (search_param >= 1) hex_range = 63;
dia_range = 8;
#else
(void)search_param;
#endif
/* hex search */
......
......@@ -5831,6 +5831,7 @@ int vp8_get_preview_raw_frame(VP8_COMP *cpi, YV12_BUFFER_CONFIG *dest, vp8_ppfla
cpi->common.show_frame_mi = cpi->common.mi;
ret = vp8_post_proc_frame(&cpi->common, dest, flags);
#else
(void)flags;
if (cpi->common.frame_to_show)
{
......
......@@ -180,6 +180,7 @@ int vp8_skip_fractional_mv_step(MACROBLOCK *mb, BLOCK *b, BLOCKD *d,
(void) ref_mv;
(void) error_per_bit;
(void) vfp;
(void) mb;
(void) mvcost;
(void) distortion;
(void) sse;
......
......@@ -837,6 +837,9 @@ static int rd_cost_mbuv(MACROBLOCK *mb)
static int rd_inter16x16_uv(VP8_COMP *cpi, MACROBLOCK *x, int *rate,
int *distortion, int fullpixel)
{
(void)cpi;
(void)fullpixel;
vp8_build_inter16x16_predictors_mbuv(&x->e_mbd);
vp8_subtract_mbuv(x->src_diff,
x->src.u_buffer, x->src.v_buffer, x->src.uv_stride,
......@@ -854,6 +857,9 @@ static int rd_inter16x16_uv(VP8_COMP *cpi, MACROBLOCK *x, int *rate,
static int rd_inter4x4_uv(VP8_COMP *cpi, MACROBLOCK *x, int *rate,
int *distortion, int fullpixel)
{
(void)cpi;
(void)fullpixel;
vp8_build_inter4x4_predictors_mbuv(&x->e_mbd);
vp8_subtract_mbuv(x->src_diff,
x->src.u_buffer, x->src.v_buffer, x->src.uv_stride,
......
......@@ -163,6 +163,8 @@ static int vp8_temporal_filter_find_matching_mb_c
int pre = d->offset;
int pre_stride = x->e_mbd.pre.y_stride;
(void)error_thresh;
best_ref_mv1.as_int = 0;
best_ref_mv1_full.as_mv.col = best_ref_mv1.as_mv.col >>3;
best_ref_mv1_full.as_mv.row = best_ref_mv1.as_mv.row >>3;
......
......@@ -384,6 +384,8 @@ static vpx_codec_err_t set_vp8e_config(VP8_CONFIG *oxcf,
oxcf->mr_down_sampling_factor.den = mr_cfg->mr_down_sampling_factor.den;
oxcf->mr_low_res_mode_info = mr_cfg->mr_low_res_mode_info;
}
#else
(void)mr_cfg;
#endif
oxcf->cpu_used = vp8_cfg.cpu_used;
......@@ -628,6 +630,9 @@ static vpx_codec_err_t vp8e_mr_alloc_mem(const vpx_codec_enc_cfg_t *cfg,
*mem_loc = (void *)shared_mem_loc;
res = VPX_CODEC_OK;
}
#else
(void)cfg;
(void)mem_loc;
#endif
return res;
}
......
......@@ -74,6 +74,7 @@ static unsigned long vp8_priv_sz(const vpx_codec_dec_cfg_t *si, vpx_codec_flags_
* known)
*/
(void)si;
(void)flags;
return sizeof(vpx_codec_alg_priv_t);
}
......@@ -647,6 +648,8 @@ static vpx_codec_err_t vp8_set_postproc(vpx_codec_alg_priv_t *ctx,
return VPX_CODEC_INVALID_PARAM;
#else
(void)ctx;
(void)args;
return VPX_CODEC_INCAPABLE;
#endif
}
......
......@@ -1197,6 +1197,7 @@ static int parse_stream_params(struct VpxEncoderConfig *global,
static void validate_stream_config(const struct stream_state *stream,
const struct VpxEncoderConfig *global) {
const struct stream_state *streami;
(void)global;
if (!stream->config.cfg.g_w || !stream->config.cfg.g_h)
fatal("Stream %d: Specify stream dimensions with --width (-w) "
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment