GitLab

Change-Id: I99937cbdd6bfe52b7c8ae42f05526dfc06a602f4

Added validity checking in multi-res encoder. Disable spatial
resampling and frame dropping before we have those supports.
Also, deallocate the memory for all resolution levels once error
occurs.

Change-Id: Ia5d65a645381cad1a49940ab3a19bb5696c39c09

Removed encoding_mode, which is not used anymore.

Change-Id: I569b2d4afe4d2f57bda8248615108c7cfc40134c

We need an easy way to build the unit test driver without running the
tests. This enables passing options like --gtest_filter to the
executable, which can't be done very cleanly when running under
`make test`.

Fixed a number of compiler errors/warnings when building the tests
in various configurations by Jenkins.

Change-Id: I9198122600bcf02520688e5f052ab379f963b77b

Update the comment that defines the allowed ranges for
delta_q and delta_lf that can be used with segmentation.

Change-Id: Ie56ad6f946704259e03ffd49921a4cfb7e1e2f1f

Avoid a pthreads dependency via pthread_once() when compiled with
--disable-multithread.

In addition, this synchronization is disabled for Win32 as well, even
though we can be sure that the required primatives exist, so that the
requirements on the application when built with --disable-multithread
are consistent across platforms.

Users using libvpx built with --disable-multithread in a multithreaded
context should provide their own synchronization. Updated the
documentation to vpx_codec_enc_init_ver() and vpx_codec_dec_init_ver()
to note this requirement. Moved the RTCD initialization call to match
this description, as previously it didn't happen until the first
frame.

Change-Id: Id576f6bce2758362188278d3085051c218a56d4a

In multi-resolution encoding, frame_type decision for each frame
is made by the lowest-resolution encoder. For all other higher-
resolution encoders, kf_mode is always set to VPX_KF_DISABLED,
and they are forced to use the same frame_type picked by the
lowest-resolution encoder.

Change-Id: Ic4d52ec65bbc012ca9c2d236210e28a295591eaf

Remove a bunch of compatibility code dating back to before the initial
libvpx release.

Change-Id: Ie50b81e7d665955bec3d692cd6521c9583e85ca3

Move the notion of 0 bitrate implying skip deeper into the codec,
rather than doing it at the multi-encoder API level. This preserves
v1.0.0 ABI compatibility, rather than forcing a bump to v2.0.0 over a
minor change. Also, this allows the case where the application can
selectively enable and disable the larger resolution(s) without having
to reinitialize the codec instace (for instance, if no target is
receiving the full resolution stream).

It's not clear how deep to push this check. It may be valuable to
allow the framerate adaptation code to run, for example. Currently put
the check as early as possible for simplicity, should reevaluate this
as this feature gains real use.

Change-Id: I371709b8c6b52185a1c71a166a131ecc244582f0

Preserved the prior names for compatibility, will remove in the future.

Change-Id: I8773f959ebce72f60168a2972f7a8ffe6642b9b2

These are warnings in most builds, but show up as compile errors on
 some platforms when these headers are included from C++ code.

Change-Id: I6c523b4dbbc699075fe73830442b51922e5a61d5

These are warnings in most builds, but show up as compile errors on
 some platforms when these headers are included from C++ code.

Change-Id: I6c523b4dbbc699075fe73830442b51922e5a61d5

Fix code for following warnings:
-Wimplicit-function-declaration
-Wuninitialized
-Wunused-but-set-variable
-Wunused-variable

Change-Id: I2be434f22fdecb903198e8b0711255b4c1a2947a

Move the notion of 0 bitrate implying skip deeper into the codec,
rather than doing it at the multi-encoder API level. This preserves
v1.0.0 ABI compatibility, rather than forcing a bump to v2.0.0 over a
minor change. Also, this allows the case where the application can
selectively enable and disable the larger resolution(s) without having
to reinitialize the codec instace (for instance, if no target is
receiving the full resolution stream).

It's not clear how deep to push this check. It may be valuable to
allow the framerate adaptation code to run, for example. Currently put
the check as early as possible for simplicity, should reevaluate this
as this feature gains real use.

Change-Id: I371709b8c6b52185a1c71a166a131ecc244582f0

When using 'make dist' after --disable-vp8[encoder|decoder] it would
fail to recognize the option. This would only occur when also specifying
--enable-install-docs and --enable-install-srcs but not
--enable-codec-srcs

Including vpx/ fixes builds with --enable-codec-srcs

vpx_timer.h is also required for vpxenc.c

Change-Id: Ie3e28b2f7ec7ee6d5961d3843f9eab869f79c35b

doxygen < 1.7.? seems to have been more tolerant of single line
\if/\endif

This change fixes warnings such as:
mainpage.dox:13: warning: unable to resolve reference to `vp8_encoder-'
for \ref command
vpx_decoder.h:193: warning: explicit link request to 'n' could not be
resolved

Change-Id: If3d04af5ede1b0d1e2c63021d0e4ac8f98db20b2

Sometimes, a user doesn't have enough bandwidth to send high-resolution
(i.e. HD) video even though the camera catches HD video. This change
allowed users to skip highest-resolution encoding by setting that level's
target bit rate to 0.

To test it, modify the following line in vp8_multi_resolution_encoder.c.
    unsigned int  target_bitrate[NUM_ENCODERS]={1400, 500, 100};
To skip the highest-resolution level, change it to
    unsigned int  target_bitrate[NUM_ENCODERS]={0, 500, 100};
To skip the first and second highest resolution levels, change it to
    unsigned int  target_bitrate[NUM_ENCODERS]={0, 0, 100};

This change also fixed a small problem in mapping, which slightly helped
quality and performance.

Change-Id: I977bae9a9fbfba85c8be4bd5af01539f2b84bc81

Change-Id: Id683b4d7f46ffa99145fc4b824c7232ab4182f21

Adds a multiframe postprocessing module to enhance the quality of
certain frames that are coded at lower quality than preceding frames.
The module can be invoked from the commandline by use of the --mfqe
option, and will be most beneficial for enhancing the quality of
frames decoded using scalable patterns.

Uses the vp8_variance_var16x16 and vp8_variance_sad16x16 function
pointers to compute SAD and Variance of blocks.

Change-Id: Id73d2a6e3572d07f9f8e36bbce00a4fc5ffd8961

Aligned the image buffer and stride to 32 bytes. This enables
calling of optimized scaler function in libyuv, and improves
the performance.

Tested libyuv scaler(x86 optimization) on Linux and Windows,
including: Linux 32/64bit, visual studio 32/64bit, Cygwin, and
MinGW32.

Also, fixed a wrong pointer in vpx_codec_encode().

Change-Id: Ibe97d7a0a745f82c43852fa4ed719be5a4db6abc

The previous definition of uintptr_t was incorrect on x64 with MSVC.
Also, the ARMV6 version of int_fast16_t was defined as unsigned for
some reason. Since the fast types are currently unused, just remove
them.

Change-Id: Idd73f77a989c77feedcb4a6802ae6bd37324ed40

Added code to allocate aligned image buffer in vpx_img_alloc(). The
alignment of the buffer and stride is determined by the parameter
align.

Change-Id: Idc866978484be3558551c56df39130ab7f74ddd4

The example encoder down-samples the input video frames a number of
times with a down-sampling factor, and then encodes and outputs
bitstreams with different resolutions.

Support arbitrary down-sampling factor, and down-sampling factor
can be different for each encoding level.

For example, the encoder can be tested as follows.
1. Configure with multi-resolution encoding enabled:
../libvpx/configure --target=x86-linux-gcc --disable-codecs
--enable-vp8 --enable-runtime_cpu_detect --enable-debug
--disable-install-docs --enable-error-concealment
--enable-multi-res-encoding
2. Run make
3. Encode:
If input video is 1280x720, run:
./vp8_multi_resolution_encoder 1280 720 input.yuv 1.ivf 2.ivf 3.ivf 1
(output: 1.ivf(1280x720); 2.ivf(640x360); 3.ivf(320x180).
The last parameter is set to 1/0 to show/not show PSNR.)
4. Decode:
./simple_decoder 1.ivf 1.yuv
./simple_decoder 2.ivf 2.yuv
./simple_decoder 3.ivf 3.yuv
5. View video:
mplayer 1.yuv -demuxer rawvideo -rawvideo w=1280:h=720 -loop 0 -fps 30
mplayer 2.yuv -demuxer rawvideo -rawvideo w=640:h=360 -loop 0 -fps 30
mplayer 3.yuv -demuxer rawvideo -rawvideo w=320:h=180 -loop 0 -fps 30

The encoding parameters can be modified in vp8_multi_resolution_encoder.c,
for example, target bitrate, frame rate...

Modified API. John helped a lot with that. Thanks!

Change-Id: I03be9a51167eddf94399f92d269599fb3f3d54f5

Adding support for several partitions within one input fragment.
This is necessary to fully support all possible packetization
combinations in the VP8 RTP profile. Several partitions can
be transmitted in the same packet, and they can only be split
by reading the partition lengths from the bitstream.

Change-Id: If7d7ea331cc78cb7efd74c4a976b720c9a655463

Commit 217591fd modified the encoder ABI without incrementing the version number.

Change-Id: I74de01597dadcdcd96f6b817e4ec69d9ab535e4c

Added the ability to create rate-targeted, temporally
scalable, VP8 compatible bitstreams.

The application vp8_scalable_patterns.c demonstrates how
to use this capability. Users can create output bitstreams
containing upto 5 temporally separable streams encoded
as a single VP8 bitstream.
(previously abandoned as:
I92d1483e887adb274d07ce9e567e4d0314881b0a)

Change-Id: I156250a3fe930be57c069d508c41b6a7a4ea8d6a

Since this is the only ABI incompatible change since the last release,
convert it to use the control interface instead. The member of the
configuration struct is replaced with the VP8E_SET_MAX_INTRA_BITRATE_PCT
control.

More significant API changes were expected to be forthcoming when this
control was first introduced, and while they continue to be expected,
it's not worth breaking compatibility for only this change.

Change-Id: I799d8dbe24c8bc9c241e0b7743b2b64f81327d59

This reverts commit b73a3693.

This version of the check doesn't work with generic-gnu, and figuring
out the correct symbol version at configure time is probably more work
than this is worth. May revisit in the future.

Change-Id: I6c75e88bd3bd82a4b21e09a25780fe53aacb7d70

glibc implements some checking on longjmp() calls by replacing it with
an internal function __longjmp_chk(), when FORTIFY_SOURCE is defined.
This can be problematic when compiling the library under one version of
glibc and running it under another. Work around this issue for the one
symbol affected for now, before taking out the undef hammer.

Fixes http://code.google.com/p/webm/issues/detail?id=166

Change-Id: Ifc5e25cdec17915e394711f2185b3e9214572d10

Files are already in vpx/

Change-Id: I67dcbb5d5b6cb55e91b4e4927ab842a1e2c9e284

With this commit frames can be received partition-by-partition
from the encoder and passed partition-by-partition to the
decoder.

At the encoder-side this makes it easier to split encoded
frames at partition boundaries, useful when packetizing
frames. When VPX_CODEC_USE_OUTPUT_PARTITION is enabled,
several VPX_CODEC_CX_FRAME_PKT packets will be returned
from vpx_codec_get_cx_data(), containing one partition
each. The partition_id (starting at 0) specifies the decoding
order of the partitions. All partitions but the last has
the VPX_FRAME_IS_FRAGMENT flag set.

At the decoder this opens up the possibility of decoding partition
N even though partition N-1 was lost (given that independent
partitioning has been enabled in the encoder) if more info
about the missing parts of the stream is available through
external signaling.

Each partition is passed to the decoder through the
vpx_codec_decode() function, with the data pointer pointing
to the start of the partition, and with data_sz equal to the
size of the partition. Missing partitions can be signaled to
the decoder by setting data != NULL and data_sz = 0. When
all partitions have been given to the decoder "end of data"
should be signaled by calling vpx_codec_decode() with
data = NULL and data_sz = 0.

The first partition is the first partition according to the
VP8 bitstream + the uncompressed data chunk + DCT address
offsets if multiple residual partitions are used.

Change-Id: I5bc0682b9e4112e0db77904755c694c3c7ac6e74

Adding capabilities with which the encoder can output frames
partition by partition, and the decoder can get input data
partition by partition.

Change-Id: Ieae0801480b8de8cd43c3c57dd3bab2e4c346fe0

Adding support in the encoder for generating
independent residual partitions by forcing
equal probabilities over the prev coef entropy
contexts.

Change-Id: I402f5c353255f3ca20eae2620af739f6a498cd21

The error-concealer is plugged in after any motion vectors have been
decoded. It tries to estimate any missing motion vectors from the
motion vectors of the previous frame. Intra blocks with missing
residual are replaced with inter blocks with estimated motion vectors.

This feature was developed in a separate sandbox
(sandbox/holmer/error-concealment).

Change-Id: I5c8917b031078d79dbafd90f6006680e84a23412

VS2010 has included stdint.h, but not inttypes.h. Prefer the compiler's
version of these types. Fixes issue 327.

Change-Id: Ica71600e06b8e94e3bbb4f12988b4a9817d5e5e4

included vpx_config.h in vpx_encoder.c
to properly define FLOATING_POINT_INIT()

Change-Id: Ie518bf5c087622658e37fca90aa4ddfe79d053f6

Adds a control to limit the maximum size of a keyframe, as a function of
the per-frame bitrate. See this thread[1] for more detailed discussion:

[1]: http://groups.google.com/a/webmproject.org/group/codec-devel/browse_thread/thread/271b944a5e47ca38

Change-Id: I7337707642eb8041d1e593efc2edfdf66db02a94

This patch changes the rc_undershoot_pct and rc_overshoot_pct controls
to set the "aggressiveness" of rate adaptation, by limiting the
amount of difference between the target buffer level and the actual
buffer level which is applied to the target frame rate for this frame.

This patch was initially provided by arosenberg at logitech.com as
an attachment to issue #270. It was modified to separate these controls
from the other unrelated modifications in that patch, as well as to
use the pre-existing variables rather than introducing new ones.

Change-Id: Id542e3f5667dd92d857d5eabf29878f2fd730a62

Remove encoding speed limitation in real-time mode.

Change-Id: Ib5e35d8bb522b2a25f3e4ad5cfe2788ebebb3617

Make sure the given interface is actually a decoder interface before
initializing it.

Change-Id: Ie48d737f2956cc2f0891666de5ea87251e96bc49