error.c 30.5 KB
Newer Older
1 2 3
/*
 *  Error message information
 *
4
 *  Copyright (C) 2006-2012, Brainspark B.V.
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29
 *
 *  This file is part of PolarSSL (http://www.polarssl.org)
 *  Lead Maintainer: Paul Bakker <polarssl_maintainer at polarssl.org>
 *
 *  All rights reserved.
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License along
 *  with this program; if not, write to the Free Software Foundation, Inc.,
 *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 */

#include "polarssl/config.h"

#if defined(POLARSSL_ERROR_C)

30 31
#include "polarssl/error.h"

32 33 34 35 36 37 38 39 40 41 42 43
#if defined(POLARSSL_AES_C)
#include "polarssl/aes.h"
#endif

#if defined(POLARSSL_BASE64_C)
#include "polarssl/base64.h"
#endif

#if defined(POLARSSL_BIGNUM_C)
#include "polarssl/bignum.h"
#endif

44 45 46 47
#if defined(POLARSSL_BLOWFISH_C)
#include "polarssl/blowfish.h"
#endif

48 49 50 51
#if defined(POLARSSL_CAMELLIA_C)
#include "polarssl/camellia.h"
#endif

52 53 54 55
#if defined(POLARSSL_CIPHER_C)
#include "polarssl/cipher.h"
#endif

56 57 58 59
#if defined(POLARSSL_CTR_DRBG_C)
#include "polarssl/ctr_drbg.h"
#endif

60 61 62 63 64 65 66 67
#if defined(POLARSSL_DES_C)
#include "polarssl/des.h"
#endif

#if defined(POLARSSL_DHM_C)
#include "polarssl/dhm.h"
#endif

Paul Bakker's avatar
Paul Bakker committed
68 69 70 71
#if defined(POLARSSL_ECP_C)
#include "polarssl/ecp.h"
#endif

72 73 74 75
#if defined(POLARSSL_ENTROPY_C)
#include "polarssl/entropy.h"
#endif

76 77 78 79
#if defined(POLARSSL_GCM_C)
#include "polarssl/gcm.h"
#endif

80 81 82 83
#if defined(POLARSSL_MD_C)
#include "polarssl/md.h"
#endif

84 85 86 87 88 89 90 91 92 93 94 95
#if defined(POLARSSL_MD2_C)
#include "polarssl/md2.h"
#endif

#if defined(POLARSSL_MD4_C)
#include "polarssl/md4.h"
#endif

#if defined(POLARSSL_MD5_C)
#include "polarssl/md5.h"
#endif

96 97 98 99
#if defined(POLARSSL_NET_C)
#include "polarssl/net.h"
#endif

100 101 102 103
#if defined(POLARSSL_OID_C)
#include "polarssl/oid.h"
#endif

104 105 106 107
#if defined(POLARSSL_PADLOCK_C)
#include "polarssl/padlock.h"
#endif

Paul Bakker's avatar
Paul Bakker committed
108 109 110 111
#if defined(POLARSSL_PBKDF2_C)
#include "polarssl/pbkdf2.h"
#endif

112 113 114 115
#if defined(POLARSSL_PEM_C)
#include "polarssl/pem.h"
#endif

116 117 118 119
#if defined(POLARSSL_PK_C)
#include "polarssl/pk.h"
#endif

120 121 122 123
#if defined(POLARSSL_PKCS12_C)
#include "polarssl/pkcs12.h"
#endif

124 125 126 127
#if defined(POLARSSL_PKCS5_C)
#include "polarssl/pkcs5.h"
#endif

128 129 130 131
#if defined(POLARSSL_RSA_C)
#include "polarssl/rsa.h"
#endif

132 133 134 135
#if defined(POLARSSL_SHA1_C)
#include "polarssl/sha1.h"
#endif

136
#if defined(POLARSSL_SHA256_C)
137
#include "polarssl/sha256.h"
138 139
#endif

140
#if defined(POLARSSL_SHA512_C)
141
#include "polarssl/sha512.h"
142 143
#endif

144
#if defined(POLARSSL_SSL_TLS_C)
145 146 147 148 149 150 151 152 153 154 155 156 157 158
#include "polarssl/ssl.h"
#endif

#if defined(POLARSSL_X509_PARSE_C)
#include "polarssl/x509.h"
#endif

#if defined(POLARSSL_XTEA_C)
#include "polarssl/xtea.h"
#endif


#include <string.h>

159 160 161 162
#if defined _MSC_VER && !defined  snprintf
#define  snprintf  _snprintf
#endif

163
void polarssl_strerror( int ret, char *buf, size_t buflen )
164 165 166 167 168 169 170 171 172 173 174 175 176 177 178
{
    size_t len;
    int use_ret;

    memset( buf, 0x00, buflen );
     
    if( ret < 0 )
        ret = -ret;

    if( ret & 0xFF80 )
    {
        use_ret = ret & 0xFF80;

        // High level error codes
        //
179 180 181 182 183 184 185 186 187 188 189 190 191
#if defined(POLARSSL_CIPHER_C)
        if( use_ret == -(POLARSSL_ERR_CIPHER_FEATURE_UNAVAILABLE) )
            snprintf( buf, buflen, "CIPHER - The selected feature is not available" );
        if( use_ret == -(POLARSSL_ERR_CIPHER_BAD_INPUT_DATA) )
            snprintf( buf, buflen, "CIPHER - Bad input parameters to function" );
        if( use_ret == -(POLARSSL_ERR_CIPHER_ALLOC_FAILED) )
            snprintf( buf, buflen, "CIPHER - Failed to allocate memory" );
        if( use_ret == -(POLARSSL_ERR_CIPHER_INVALID_PADDING) )
            snprintf( buf, buflen, "CIPHER - Input data contains invalid padding and is rejected" );
        if( use_ret == -(POLARSSL_ERR_CIPHER_FULL_BLOCK_EXPECTED) )
            snprintf( buf, buflen, "CIPHER - Decryption of block requires a full block" );
#endif /* POLARSSL_CIPHER_C */

192 193 194 195 196 197 198 199 200 201
#if defined(POLARSSL_DHM_C)
        if( use_ret == -(POLARSSL_ERR_DHM_BAD_INPUT_DATA) )
            snprintf( buf, buflen, "DHM - Bad input parameters to function" );
        if( use_ret == -(POLARSSL_ERR_DHM_READ_PARAMS_FAILED) )
            snprintf( buf, buflen, "DHM - Reading of the DHM parameters failed" );
        if( use_ret == -(POLARSSL_ERR_DHM_MAKE_PARAMS_FAILED) )
            snprintf( buf, buflen, "DHM - Making of the DHM parameters failed" );
        if( use_ret == -(POLARSSL_ERR_DHM_READ_PUBLIC_FAILED) )
            snprintf( buf, buflen, "DHM - Reading of the public values failed" );
        if( use_ret == -(POLARSSL_ERR_DHM_MAKE_PUBLIC_FAILED) )
202
            snprintf( buf, buflen, "DHM - Making of the public value failed" );
203 204 205 206
        if( use_ret == -(POLARSSL_ERR_DHM_CALC_SECRET_FAILED) )
            snprintf( buf, buflen, "DHM - Calculation of the DHM secret failed" );
#endif /* POLARSSL_DHM_C */

Paul Bakker's avatar
Paul Bakker committed
207 208 209
#if defined(POLARSSL_ECP_C)
        if( use_ret == -(POLARSSL_ERR_ECP_BAD_INPUT_DATA) )
            snprintf( buf, buflen, "ECP - Bad input parameters to function" );
210 211
        if( use_ret == -(POLARSSL_ERR_ECP_BUFFER_TOO_SMALL) )
            snprintf( buf, buflen, "ECP - The buffer is too small to write to" );
Paul Bakker's avatar
Paul Bakker committed
212 213
        if( use_ret == -(POLARSSL_ERR_ECP_GENERIC) )
            snprintf( buf, buflen, "ECP -  Generic ECP error" );
Paul Bakker's avatar
Paul Bakker committed
214 215
        if( use_ret == -(POLARSSL_ERR_ECP_FEATURE_UNAVAILABLE) )
            snprintf( buf, buflen, "ECP - Requested curve not available" );
Paul Bakker's avatar
Paul Bakker committed
216 217
#endif /* POLARSSL_ECP_C */

218 219 220
#if defined(POLARSSL_MD_C)
        if( use_ret == -(POLARSSL_ERR_MD_FEATURE_UNAVAILABLE) )
            snprintf( buf, buflen, "MD - The selected feature is not available" );
221 222 223 224
        if( use_ret == -(POLARSSL_ERR_MD_BAD_INPUT_DATA) )
            snprintf( buf, buflen, "MD - Bad input parameters to function" );
        if( use_ret == -(POLARSSL_ERR_MD_ALLOC_FAILED) )
            snprintf( buf, buflen, "MD - Failed to allocate memory" );
225 226
        if( use_ret == -(POLARSSL_ERR_MD_FILE_IO_ERROR) )
            snprintf( buf, buflen, "MD - Opening or reading of file failed" );
227 228 229
#endif /* POLARSSL_MD_C */

#if defined(POLARSSL_PEM_C)
230 231
        if( use_ret == -(POLARSSL_ERR_PEM_NO_HEADER_FOOTER_PRESENT) )
            snprintf( buf, buflen, "PEM - No PEM header or footer found" );
232 233 234 235 236 237 238 239 240 241 242 243 244 245
        if( use_ret == -(POLARSSL_ERR_PEM_INVALID_DATA) )
            snprintf( buf, buflen, "PEM - PEM string is not as expected" );
        if( use_ret == -(POLARSSL_ERR_PEM_MALLOC_FAILED) )
            snprintf( buf, buflen, "PEM - Failed to allocate memory" );
        if( use_ret == -(POLARSSL_ERR_PEM_INVALID_ENC_IV) )
            snprintf( buf, buflen, "PEM - RSA IV is not in hex-format" );
        if( use_ret == -(POLARSSL_ERR_PEM_UNKNOWN_ENC_ALG) )
            snprintf( buf, buflen, "PEM - Unsupported key encryption algorithm" );
        if( use_ret == -(POLARSSL_ERR_PEM_PASSWORD_REQUIRED) )
            snprintf( buf, buflen, "PEM - Private key password can't be empty" );
        if( use_ret == -(POLARSSL_ERR_PEM_PASSWORD_MISMATCH) )
            snprintf( buf, buflen, "PEM - Given private key password does not allow for correct decryption" );
        if( use_ret == -(POLARSSL_ERR_PEM_FEATURE_UNAVAILABLE) )
            snprintf( buf, buflen, "PEM - Unavailable feature, e.g. hashing/encryption combination" );
246 247
        if( use_ret == -(POLARSSL_ERR_PEM_BAD_INPUT_DATA) )
            snprintf( buf, buflen, "PEM - Bad input parameters to function" );
248 249
#endif /* POLARSSL_PEM_C */

250 251 252
#if defined(POLARSSL_PK_C)
        if( use_ret == -(POLARSSL_ERR_PK_MALLOC_FAILED) )
            snprintf( buf, buflen, "PK - Memory alloation failed" );
253 254
        if( use_ret == -(POLARSSL_ERR_PK_TYPE_MISMATCH) )
            snprintf( buf, buflen, "PK - Type mismatch, eg attempt to use a RSA key as EC, or to modify key type" );
Manuel Pégourié-Gonnard's avatar
Manuel Pégourié-Gonnard committed
255 256
        if( use_ret == -(POLARSSL_ERR_PK_BAD_INPUT_DATA) )
            snprintf( buf, buflen, "PK - Bad input parameters to function" );
257 258
#endif /* POLARSSL_PK_C */

259 260 261 262 263 264 265
#if defined(POLARSSL_PKCS12_C)
        if( use_ret == -(POLARSSL_ERR_PKCS12_BAD_INPUT_DATA) )
            snprintf( buf, buflen, "PKCS12 - Bad input parameters to function" );
        if( use_ret == -(POLARSSL_ERR_PKCS12_FEATURE_UNAVAILABLE) )
            snprintf( buf, buflen, "PKCS12 - Feature not available, e.g. unsupported encryption scheme" );
        if( use_ret == -(POLARSSL_ERR_PKCS12_PBE_INVALID_FORMAT) )
            snprintf( buf, buflen, "PKCS12 - PBE ASN.1 data not as expected" );
266 267
        if( use_ret == -(POLARSSL_ERR_PKCS12_PASSWORD_MISMATCH) )
            snprintf( buf, buflen, "PKCS12 - Given private key password does not allow for correct decryption" );
268 269
#endif /* POLARSSL_PKCS12_C */

270 271 272 273 274 275 276 277 278 279 280
#if defined(POLARSSL_PKCS5_C)
        if( use_ret == -(POLARSSL_ERR_PKCS5_BAD_INPUT_DATA) )
            snprintf( buf, buflen, "PKCS5 - Bad input parameters to function" );
        if( use_ret == -(POLARSSL_ERR_PKCS5_INVALID_FORMAT) )
            snprintf( buf, buflen, "PKCS5 - Unexpected ASN.1 data" );
        if( use_ret == -(POLARSSL_ERR_PKCS5_FEATURE_UNAVAILABLE) )
            snprintf( buf, buflen, "PKCS5 - Requested encryption or digest alg not available" );
        if( use_ret == -(POLARSSL_ERR_PKCS5_PASSWORD_MISMATCH) )
            snprintf( buf, buflen, "PKCS5 - Given private key password does not allow for correct decryption" );
#endif /* POLARSSL_PKCS5_C */

281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301
#if defined(POLARSSL_RSA_C)
        if( use_ret == -(POLARSSL_ERR_RSA_BAD_INPUT_DATA) )
            snprintf( buf, buflen, "RSA - Bad input parameters to function" );
        if( use_ret == -(POLARSSL_ERR_RSA_INVALID_PADDING) )
            snprintf( buf, buflen, "RSA - Input data contains invalid padding and is rejected" );
        if( use_ret == -(POLARSSL_ERR_RSA_KEY_GEN_FAILED) )
            snprintf( buf, buflen, "RSA - Something failed during generation of a key" );
        if( use_ret == -(POLARSSL_ERR_RSA_KEY_CHECK_FAILED) )
            snprintf( buf, buflen, "RSA - Key failed to pass the libraries validity check" );
        if( use_ret == -(POLARSSL_ERR_RSA_PUBLIC_FAILED) )
            snprintf( buf, buflen, "RSA - The public key operation failed" );
        if( use_ret == -(POLARSSL_ERR_RSA_PRIVATE_FAILED) )
            snprintf( buf, buflen, "RSA - The private key operation failed" );
        if( use_ret == -(POLARSSL_ERR_RSA_VERIFY_FAILED) )
            snprintf( buf, buflen, "RSA - The PKCS#1 verification failed" );
        if( use_ret == -(POLARSSL_ERR_RSA_OUTPUT_TOO_LARGE) )
            snprintf( buf, buflen, "RSA - The output buffer for decryption is not large enough" );
        if( use_ret == -(POLARSSL_ERR_RSA_RNG_FAILED) )
            snprintf( buf, buflen, "RSA - The random generator failed to generate non-zeros" );
#endif /* POLARSSL_RSA_C */

302
#if defined(POLARSSL_SSL_TLS_C)
303 304 305 306 307 308 309 310
        if( use_ret == -(POLARSSL_ERR_SSL_FEATURE_UNAVAILABLE) )
            snprintf( buf, buflen, "SSL - The requested feature is not available" );
        if( use_ret == -(POLARSSL_ERR_SSL_BAD_INPUT_DATA) )
            snprintf( buf, buflen, "SSL - Bad input parameters to function" );
        if( use_ret == -(POLARSSL_ERR_SSL_INVALID_MAC) )
            snprintf( buf, buflen, "SSL - Verification of the message MAC failed" );
        if( use_ret == -(POLARSSL_ERR_SSL_INVALID_RECORD) )
            snprintf( buf, buflen, "SSL - An invalid SSL record was received" );
311 312
        if( use_ret == -(POLARSSL_ERR_SSL_CONN_EOF) )
            snprintf( buf, buflen, "SSL - The connection indicated an EOF" );
313 314 315 316 317 318 319 320 321 322 323 324 325
        if( use_ret == -(POLARSSL_ERR_SSL_UNKNOWN_CIPHER) )
            snprintf( buf, buflen, "SSL - An unknown cipher was received" );
        if( use_ret == -(POLARSSL_ERR_SSL_NO_CIPHER_CHOSEN) )
            snprintf( buf, buflen, "SSL - The server has no ciphersuites in common with the client" );
        if( use_ret == -(POLARSSL_ERR_SSL_NO_SESSION_FOUND) )
            snprintf( buf, buflen, "SSL - No session to recover was found" );
        if( use_ret == -(POLARSSL_ERR_SSL_NO_CLIENT_CERTIFICATE) )
            snprintf( buf, buflen, "SSL - No client certification received from the client, but required by the authentication mode" );
        if( use_ret == -(POLARSSL_ERR_SSL_CERTIFICATE_TOO_LARGE) )
            snprintf( buf, buflen, "SSL - DESCRIPTION MISSING" );
        if( use_ret == -(POLARSSL_ERR_SSL_CERTIFICATE_REQUIRED) )
            snprintf( buf, buflen, "SSL - The own certificate is not set, but needed by the server" );
        if( use_ret == -(POLARSSL_ERR_SSL_PRIVATE_KEY_REQUIRED) )
326
            snprintf( buf, buflen, "SSL - The own private key or pre-shared key is not set, but needed" );
327 328 329 330 331
        if( use_ret == -(POLARSSL_ERR_SSL_CA_CHAIN_REQUIRED) )
            snprintf( buf, buflen, "SSL - No CA Chain is set, but required to operate" );
        if( use_ret == -(POLARSSL_ERR_SSL_UNEXPECTED_MESSAGE) )
            snprintf( buf, buflen, "SSL - An unexpected message was received from our peer" );
        if( use_ret == -(POLARSSL_ERR_SSL_FATAL_ALERT_MESSAGE) )
332
        {
333
            snprintf( buf, buflen, "SSL - A fatal alert message was received from our peer" );
334 335
            return;
        }
336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353
        if( use_ret == -(POLARSSL_ERR_SSL_PEER_VERIFY_FAILED) )
            snprintf( buf, buflen, "SSL - Verification of our peer failed" );
        if( use_ret == -(POLARSSL_ERR_SSL_PEER_CLOSE_NOTIFY) )
            snprintf( buf, buflen, "SSL - The peer notified us that the connection is going to be closed" );
        if( use_ret == -(POLARSSL_ERR_SSL_BAD_HS_CLIENT_HELLO) )
            snprintf( buf, buflen, "SSL - Processing of the ClientHello handshake message failed" );
        if( use_ret == -(POLARSSL_ERR_SSL_BAD_HS_SERVER_HELLO) )
            snprintf( buf, buflen, "SSL - Processing of the ServerHello handshake message failed" );
        if( use_ret == -(POLARSSL_ERR_SSL_BAD_HS_CERTIFICATE) )
            snprintf( buf, buflen, "SSL - Processing of the Certificate handshake message failed" );
        if( use_ret == -(POLARSSL_ERR_SSL_BAD_HS_CERTIFICATE_REQUEST) )
            snprintf( buf, buflen, "SSL - Processing of the CertificateRequest handshake message failed" );
        if( use_ret == -(POLARSSL_ERR_SSL_BAD_HS_SERVER_KEY_EXCHANGE) )
            snprintf( buf, buflen, "SSL - Processing of the ServerKeyExchange handshake message failed" );
        if( use_ret == -(POLARSSL_ERR_SSL_BAD_HS_SERVER_HELLO_DONE) )
            snprintf( buf, buflen, "SSL - Processing of the ServerHelloDone handshake message failed" );
        if( use_ret == -(POLARSSL_ERR_SSL_BAD_HS_CLIENT_KEY_EXCHANGE) )
            snprintf( buf, buflen, "SSL - Processing of the ClientKeyExchange handshake message failed" );
354 355 356 357
        if( use_ret == -(POLARSSL_ERR_SSL_BAD_HS_CLIENT_KEY_EXCHANGE_RP) )
            snprintf( buf, buflen, "SSL - Processing of the ClientKeyExchange handshake message failed in DHM / ECDH Read Public" );
        if( use_ret == -(POLARSSL_ERR_SSL_BAD_HS_CLIENT_KEY_EXCHANGE_CS) )
            snprintf( buf, buflen, "SSL - Processing of the ClientKeyExchange handshake message failed in DHM / ECDH Calculate Secret" );
358 359 360 361 362 363
        if( use_ret == -(POLARSSL_ERR_SSL_BAD_HS_CERTIFICATE_VERIFY) )
            snprintf( buf, buflen, "SSL - Processing of the CertificateVerify handshake message failed" );
        if( use_ret == -(POLARSSL_ERR_SSL_BAD_HS_CHANGE_CIPHER_SPEC) )
            snprintf( buf, buflen, "SSL - Processing of the ChangeCipherSpec handshake message failed" );
        if( use_ret == -(POLARSSL_ERR_SSL_BAD_HS_FINISHED) )
            snprintf( buf, buflen, "SSL - Processing of the Finished handshake message failed" );
364 365
        if( use_ret == -(POLARSSL_ERR_SSL_MALLOC_FAILED) )
            snprintf( buf, buflen, "SSL - Memory allocation failed" );
366 367 368 369
        if( use_ret == -(POLARSSL_ERR_SSL_HW_ACCEL_FAILED) )
            snprintf( buf, buflen, "SSL - Hardware acceleration function returned with error" );
        if( use_ret == -(POLARSSL_ERR_SSL_HW_ACCEL_FALLTHROUGH) )
            snprintf( buf, buflen, "SSL - Hardware acceleration function skipped / left alone data" );
370 371
        if( use_ret == -(POLARSSL_ERR_SSL_COMPRESSION_FAILED) )
            snprintf( buf, buflen, "SSL - Processing of the compression / decompression failed" );
372 373
        if( use_ret == -(POLARSSL_ERR_SSL_BAD_HS_PROTOCOL_VERSION) )
            snprintf( buf, buflen, "SSL - Handshake protocol not within min/max boundaries" );
374 375
        if( use_ret == -(POLARSSL_ERR_SSL_BAD_HS_NEW_SESSION_TICKET) )
            snprintf( buf, buflen, "SSL - Processing of the NewSessionTicket handshake message failed" );
376 377
        if( use_ret == -(POLARSSL_ERR_SSL_SESSION_TICKET_EXPIRED) )
            snprintf( buf, buflen, "SSL - Session ticket has expired" );
378 379
        if( use_ret == -(POLARSSL_ERR_SSL_PK_TYPE_MISMATCH) )
            snprintf( buf, buflen, "SSL - Public key type mismatch (eg, asked for RSA key exchange and presented EC key)" );
380
#endif /* POLARSSL_SSL_TLS_C */
381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408

#if defined(POLARSSL_X509_PARSE_C)
        if( use_ret == -(POLARSSL_ERR_X509_FEATURE_UNAVAILABLE) )
            snprintf( buf, buflen, "X509 - Unavailable feature, e.g. RSA hashing/encryption combination" );
        if( use_ret == -(POLARSSL_ERR_X509_CERT_INVALID_PEM) )
            snprintf( buf, buflen, "X509 - The PEM-encoded certificate contains invalid elements, e.g. invalid character" );
        if( use_ret == -(POLARSSL_ERR_X509_CERT_INVALID_FORMAT) )
            snprintf( buf, buflen, "X509 - The certificate format is invalid, e.g. different type expected" );
        if( use_ret == -(POLARSSL_ERR_X509_CERT_INVALID_VERSION) )
            snprintf( buf, buflen, "X509 - The certificate version element is invalid" );
        if( use_ret == -(POLARSSL_ERR_X509_CERT_INVALID_SERIAL) )
            snprintf( buf, buflen, "X509 - The serial tag or value is invalid" );
        if( use_ret == -(POLARSSL_ERR_X509_CERT_INVALID_ALG) )
            snprintf( buf, buflen, "X509 - The algorithm tag or value is invalid" );
        if( use_ret == -(POLARSSL_ERR_X509_CERT_INVALID_NAME) )
            snprintf( buf, buflen, "X509 - The name tag or value is invalid" );
        if( use_ret == -(POLARSSL_ERR_X509_CERT_INVALID_DATE) )
            snprintf( buf, buflen, "X509 - The date tag or value is invalid" );
        if( use_ret == -(POLARSSL_ERR_X509_CERT_INVALID_PUBKEY) )
            snprintf( buf, buflen, "X509 - The pubkey tag or value is invalid (only RSA is supported)" );
        if( use_ret == -(POLARSSL_ERR_X509_CERT_INVALID_SIGNATURE) )
            snprintf( buf, buflen, "X509 - The signature tag or value invalid" );
        if( use_ret == -(POLARSSL_ERR_X509_CERT_INVALID_EXTENSIONS) )
            snprintf( buf, buflen, "X509 - The extension tag or value is invalid" );
        if( use_ret == -(POLARSSL_ERR_X509_CERT_UNKNOWN_VERSION) )
            snprintf( buf, buflen, "X509 - Certificate or CRL has an unsupported version number" );
        if( use_ret == -(POLARSSL_ERR_X509_CERT_UNKNOWN_SIG_ALG) )
            snprintf( buf, buflen, "X509 - Signature algorithm (oid) is unsupported" );
409
        if( use_ret == -(POLARSSL_ERR_X509_UNKNOWN_PK_ALG) )
410
            snprintf( buf, buflen, "X509 - Key algorithm is unsupported (only RSA and EC are supported)" );
411 412 413 414 415 416 417 418
        if( use_ret == -(POLARSSL_ERR_X509_CERT_SIG_MISMATCH) )
            snprintf( buf, buflen, "X509 - Certificate signature algorithms do not match. (see \\c ::x509_cert sig_oid)" );
        if( use_ret == -(POLARSSL_ERR_X509_CERT_VERIFY_FAILED) )
            snprintf( buf, buflen, "X509 - Certificate verification failed, e.g. CRL, CA or signature check failed" );
        if( use_ret == -(POLARSSL_ERR_X509_KEY_INVALID_VERSION) )
            snprintf( buf, buflen, "X509 - Unsupported RSA key version" );
        if( use_ret == -(POLARSSL_ERR_X509_KEY_INVALID_FORMAT) )
            snprintf( buf, buflen, "X509 - Invalid RSA key tag or value" );
419 420
        if( use_ret == -(POLARSSL_ERR_X509_CERT_UNKNOWN_FORMAT) )
            snprintf( buf, buflen, "X509 - Format not recognized as DER or PEM" );
421 422 423 424 425 426
        if( use_ret == -(POLARSSL_ERR_X509_INVALID_INPUT) )
            snprintf( buf, buflen, "X509 - Input invalid" );
        if( use_ret == -(POLARSSL_ERR_X509_MALLOC_FAILED) )
            snprintf( buf, buflen, "X509 - Allocation of memory failed" );
        if( use_ret == -(POLARSSL_ERR_X509_FILE_IO_ERROR) )
            snprintf( buf, buflen, "X509 - Read/write of file failed" );
427 428 429 430
        if( use_ret == -(POLARSSL_ERR_X509_PASSWORD_REQUIRED) )
            snprintf( buf, buflen, "X509 - Private key password can't be empty" );
        if( use_ret == -(POLARSSL_ERR_X509_PASSWORD_MISMATCH) )
            snprintf( buf, buflen, "X509 - Given private key password does not allow for correct decryption" );
431 432
        if( use_ret == -(POLARSSL_ERR_X509_UNKNOWN_NAMED_CURVE) )
            snprintf( buf, buflen, "X509 - Elliptic curve is unsupported (only NIST curves are supported)" );
433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468
#endif /* POLARSSL_X509_PARSE_C */

        if( strlen( buf ) == 0 )
            snprintf( buf, buflen, "UNKNOWN ERROR CODE (%04X)", use_ret );
    }

    use_ret = ret & ~0xFF80;

    if( use_ret == 0 )
        return;

    // If high level code is present, make a concatenation between both
    // error strings.
    //
    len = strlen( buf );

    if( len > 0 )
    {
        if( buflen - len < 5 )
            return;

        snprintf( buf + len, buflen - len, " : " );

        buf += len + 3;
        buflen -= len + 3;
    }

    // Low level error codes
    //
#if defined(POLARSSL_AES_C)
    if( use_ret == -(POLARSSL_ERR_AES_INVALID_KEY_LENGTH) )
        snprintf( buf, buflen, "AES - Invalid key length" );
    if( use_ret == -(POLARSSL_ERR_AES_INVALID_INPUT_LENGTH) )
        snprintf( buf, buflen, "AES - Invalid data input length" );
#endif /* POLARSSL_AES_C */

469 470 471 472 473 474 475 476 477 478 479
#if defined(POLARSSL_ASN1_PARSE_C)
    if( use_ret == -(POLARSSL_ERR_ASN1_OUT_OF_DATA) )
        snprintf( buf, buflen, "ASN1 - Out of data when parsing an ASN1 data structure" );
    if( use_ret == -(POLARSSL_ERR_ASN1_UNEXPECTED_TAG) )
        snprintf( buf, buflen, "ASN1 - ASN1 tag was of an unexpected value" );
    if( use_ret == -(POLARSSL_ERR_ASN1_INVALID_LENGTH) )
        snprintf( buf, buflen, "ASN1 - Error when trying to determine the length or invalid length" );
    if( use_ret == -(POLARSSL_ERR_ASN1_LENGTH_MISMATCH) )
        snprintf( buf, buflen, "ASN1 - Actual length differs from expected length" );
    if( use_ret == -(POLARSSL_ERR_ASN1_INVALID_DATA) )
        snprintf( buf, buflen, "ASN1 - Data is invalid. (not used)" );
480 481
    if( use_ret == -(POLARSSL_ERR_ASN1_MALLOC_FAILED) )
        snprintf( buf, buflen, "ASN1 - Memory allocation failed" );
482 483
    if( use_ret == -(POLARSSL_ERR_ASN1_BUF_TOO_SMALL) )
        snprintf( buf, buflen, "ASN1 - Buffer too small when writing ASN.1 data structure" );
484 485
#endif /* POLARSSL_ASN1_PARSE_C */

486 487 488 489 490 491 492 493 494 495 496 497 498 499 500
#if defined(POLARSSL_BASE64_C)
    if( use_ret == -(POLARSSL_ERR_BASE64_BUFFER_TOO_SMALL) )
        snprintf( buf, buflen, "BASE64 - Output buffer too small" );
    if( use_ret == -(POLARSSL_ERR_BASE64_INVALID_CHARACTER) )
        snprintf( buf, buflen, "BASE64 - Invalid character in input" );
#endif /* POLARSSL_BASE64_C */

#if defined(POLARSSL_BIGNUM_C)
    if( use_ret == -(POLARSSL_ERR_MPI_FILE_IO_ERROR) )
        snprintf( buf, buflen, "BIGNUM - An error occurred while reading from or writing to a file" );
    if( use_ret == -(POLARSSL_ERR_MPI_BAD_INPUT_DATA) )
        snprintf( buf, buflen, "BIGNUM - Bad input parameters to function" );
    if( use_ret == -(POLARSSL_ERR_MPI_INVALID_CHARACTER) )
        snprintf( buf, buflen, "BIGNUM - There is an invalid character in the digit string" );
    if( use_ret == -(POLARSSL_ERR_MPI_BUFFER_TOO_SMALL) )
501
        snprintf( buf, buflen, "BIGNUM - The buffer is too small to write to" );
502 503 504 505 506 507
    if( use_ret == -(POLARSSL_ERR_MPI_NEGATIVE_VALUE) )
        snprintf( buf, buflen, "BIGNUM - The input arguments are negative or result in illegal output" );
    if( use_ret == -(POLARSSL_ERR_MPI_DIVISION_BY_ZERO) )
        snprintf( buf, buflen, "BIGNUM - The input argument for division is zero, which is not allowed" );
    if( use_ret == -(POLARSSL_ERR_MPI_NOT_ACCEPTABLE) )
        snprintf( buf, buflen, "BIGNUM - The input arguments are not acceptable" );
508 509
    if( use_ret == -(POLARSSL_ERR_MPI_MALLOC_FAILED) )
        snprintf( buf, buflen, "BIGNUM - Memory allocation failed" );
510
#endif /* POLARSSL_BIGNUM_C */
511 512 513 514 515 516 517

#if defined(POLARSSL_BLOWFISH_C)
    if( use_ret == -(POLARSSL_ERR_BLOWFISH_INVALID_KEY_LENGTH) )
        snprintf( buf, buflen, "BLOWFISH - Invalid key length" );
    if( use_ret == -(POLARSSL_ERR_BLOWFISH_INVALID_INPUT_LENGTH) )
        snprintf( buf, buflen, "BLOWFISH - Invalid data input length" );
#endif /* POLARSSL_BLOWFISH_C */
518 519 520 521 522 523 524 525

#if defined(POLARSSL_CAMELLIA_C)
    if( use_ret == -(POLARSSL_ERR_CAMELLIA_INVALID_KEY_LENGTH) )
        snprintf( buf, buflen, "CAMELLIA - Invalid key length" );
    if( use_ret == -(POLARSSL_ERR_CAMELLIA_INVALID_INPUT_LENGTH) )
        snprintf( buf, buflen, "CAMELLIA - Invalid data input length" );
#endif /* POLARSSL_CAMELLIA_C */

526 527 528 529 530 531 532
#if defined(POLARSSL_CTR_DRBG_C)
    if( use_ret == -(POLARSSL_ERR_CTR_DRBG_ENTROPY_SOURCE_FAILED) )
        snprintf( buf, buflen, "CTR_DRBG - The entropy source failed" );
    if( use_ret == -(POLARSSL_ERR_CTR_DRBG_REQUEST_TOO_BIG) )
        snprintf( buf, buflen, "CTR_DRBG - Too many random requested in single call" );
    if( use_ret == -(POLARSSL_ERR_CTR_DRBG_INPUT_TOO_BIG) )
        snprintf( buf, buflen, "CTR_DRBG - Input too large (Entropy + additional)" );
533 534
    if( use_ret == -(POLARSSL_ERR_CTR_DRBG_FILE_IO_ERROR) )
        snprintf( buf, buflen, "CTR_DRBG - Read/write error in file" );
535 536
#endif /* POLARSSL_CTR_DRBG_C */

537 538 539 540 541
#if defined(POLARSSL_DES_C)
    if( use_ret == -(POLARSSL_ERR_DES_INVALID_INPUT_LENGTH) )
        snprintf( buf, buflen, "DES - The data input has an invalid length" );
#endif /* POLARSSL_DES_C */

542 543 544 545 546
#if defined(POLARSSL_ENTROPY_C)
    if( use_ret == -(POLARSSL_ERR_ENTROPY_SOURCE_FAILED) )
        snprintf( buf, buflen, "ENTROPY - Critical entropy source failure" );
    if( use_ret == -(POLARSSL_ERR_ENTROPY_MAX_SOURCES) )
        snprintf( buf, buflen, "ENTROPY - No more sources can be added" );
547 548
    if( use_ret == -(POLARSSL_ERR_ENTROPY_NO_SOURCES_DEFINED) )
        snprintf( buf, buflen, "ENTROPY - No sources have been added to poll" );
549 550
#endif /* POLARSSL_ENTROPY_C */

551 552 553
#if defined(POLARSSL_GCM_C)
    if( use_ret == -(POLARSSL_ERR_GCM_AUTH_FAILED) )
        snprintf( buf, buflen, "GCM - Authenticated decryption failed" );
Paul Bakker's avatar
Paul Bakker committed
554 555
    if( use_ret == -(POLARSSL_ERR_GCM_BAD_INPUT) )
        snprintf( buf, buflen, "GCM - Bad input parameters to function" );
556 557
#endif /* POLARSSL_GCM_C */

558 559 560 561 562 563 564 565 566 567 568 569 570 571 572
#if defined(POLARSSL_MD2_C)
    if( use_ret == -(POLARSSL_ERR_MD2_FILE_IO_ERROR) )
        snprintf( buf, buflen, "MD2 - Read/write error in file" );
#endif /* POLARSSL_MD2_C */

#if defined(POLARSSL_MD4_C)
    if( use_ret == -(POLARSSL_ERR_MD4_FILE_IO_ERROR) )
        snprintf( buf, buflen, "MD4 - Read/write error in file" );
#endif /* POLARSSL_MD4_C */

#if defined(POLARSSL_MD5_C)
    if( use_ret == -(POLARSSL_ERR_MD5_FILE_IO_ERROR) )
        snprintf( buf, buflen, "MD5 - Read/write error in file" );
#endif /* POLARSSL_MD5_C */

573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591
#if defined(POLARSSL_NET_C)
    if( use_ret == -(POLARSSL_ERR_NET_UNKNOWN_HOST) )
        snprintf( buf, buflen, "NET - Failed to get an IP address for the given hostname" );
    if( use_ret == -(POLARSSL_ERR_NET_SOCKET_FAILED) )
        snprintf( buf, buflen, "NET - Failed to open a socket" );
    if( use_ret == -(POLARSSL_ERR_NET_CONNECT_FAILED) )
        snprintf( buf, buflen, "NET - The connection to the given server / port failed" );
    if( use_ret == -(POLARSSL_ERR_NET_BIND_FAILED) )
        snprintf( buf, buflen, "NET - Binding of the socket failed" );
    if( use_ret == -(POLARSSL_ERR_NET_LISTEN_FAILED) )
        snprintf( buf, buflen, "NET - Could not listen on the socket" );
    if( use_ret == -(POLARSSL_ERR_NET_ACCEPT_FAILED) )
        snprintf( buf, buflen, "NET - Could not accept the incoming connection" );
    if( use_ret == -(POLARSSL_ERR_NET_RECV_FAILED) )
        snprintf( buf, buflen, "NET - Reading information from the socket failed" );
    if( use_ret == -(POLARSSL_ERR_NET_SEND_FAILED) )
        snprintf( buf, buflen, "NET - Sending information through the socket failed" );
    if( use_ret == -(POLARSSL_ERR_NET_CONN_RESET) )
        snprintf( buf, buflen, "NET - Connection was reset by peer" );
592 593 594 595
    if( use_ret == -(POLARSSL_ERR_NET_WANT_READ) )
        snprintf( buf, buflen, "NET - Connection requires a read call" );
    if( use_ret == -(POLARSSL_ERR_NET_WANT_WRITE) )
        snprintf( buf, buflen, "NET - Connection requires a write call" );
596 597
#endif /* POLARSSL_NET_C */

598 599 600 601 602
#if defined(POLARSSL_OID_C)
    if( use_ret == -(POLARSSL_ERR_OID_NOT_FOUND) )
        snprintf( buf, buflen, "OID - OID is not found" );
#endif /* POLARSSL_OID_C */

603 604 605 606 607
#if defined(POLARSSL_PADLOCK_C)
    if( use_ret == -(POLARSSL_ERR_PADLOCK_DATA_MISALIGNED) )
        snprintf( buf, buflen, "PADLOCK - Input data should be aligned" );
#endif /* POLARSSL_PADLOCK_C */

Paul Bakker's avatar
Paul Bakker committed
608 609 610 611 612
#if defined(POLARSSL_PBKDF2_C)
    if( use_ret == -(POLARSSL_ERR_PBKDF2_BAD_INPUT_DATA) )
        snprintf( buf, buflen, "PBKDF2 - Bad input parameters to function" );
#endif /* POLARSSL_PBKDF2_C */

613 614 615 616 617
#if defined(POLARSSL_SHA1_C)
    if( use_ret == -(POLARSSL_ERR_SHA1_FILE_IO_ERROR) )
        snprintf( buf, buflen, "SHA1 - Read/write error in file" );
#endif /* POLARSSL_SHA1_C */

618 619 620 621
#if defined(POLARSSL_SHA256_C)
    if( use_ret == -(POLARSSL_ERR_SHA256_FILE_IO_ERROR) )
        snprintf( buf, buflen, "SHA256 - Read/write error in file" );
#endif /* POLARSSL_SHA256_C */
622

623 624 625 626
#if defined(POLARSSL_SHA512_C)
    if( use_ret == -(POLARSSL_ERR_SHA512_FILE_IO_ERROR) )
        snprintf( buf, buflen, "SHA512 - Read/write error in file" );
#endif /* POLARSSL_SHA512_C */
627

628 629 630 631 632 633 634 635 636 637 638
#if defined(POLARSSL_XTEA_C)
    if( use_ret == -(POLARSSL_ERR_XTEA_INVALID_INPUT_LENGTH) )
        snprintf( buf, buflen, "XTEA - The data input has an invalid length" );
#endif /* POLARSSL_XTEA_C */

    if( strlen( buf ) != 0 )
        return;

    snprintf( buf, buflen, "UNKNOWN ERROR CODE (%04X)", use_ret );
}

639 640 641 642 643 644 645
#if defined(POLARSSL_ERROR_STRERROR_BC)
void error_strerror( int ret, char *buf, size_t buflen )
{
    return polarssl_strerror( ret, buf, buflen );
}
#endif /* POLARSSL_ERROR_STRERROR_BC */

646 647 648 649 650 651 652 653 654
#else /* POLARSSL_ERROR_C */

#if defined(POLARSSL_ERROR_STRERROR_DUMMY)

#include <string.h>

/*
 * Provide an non-function in case POLARSSL_ERROR_C is not defined
 */
655
void polarssl_strerror( int ret, char *buf, size_t buflen )
656 657 658 659 660 661 662
{
    ((void) ret);

    if( buflen > 0 )
        buf[0] = '\0';
}

663 664 665 666 667 668
#if defined(POLARSSL_ERROR_STRERROR_BC)
void error_strerror( int ret, char *buf, size_t buflen )
{
    return polarssl_strerror( ret, buf, buflen );
}
#endif /* POLARSSL_ERROR_STRERROR_BC */
669
#endif /* POLARSSL_ERROR_STRERROR_DUMMY */
670

671
#endif /* POLARSSL_ERROR_C */