ChangeLog 93.3 KB
Newer Older
1
mbed TLS ChangeLog (Sorted per branch, date)
2

3 4
= mbed TLS 2.x branch

5 6 7
Security
   * Fix potential integer overflow to buffer overflow in
     mbedtls_rsa_rsaes_pkcs1_v15_encrypt and mbedtls_rsa_rsaes_oaep_encrypt
8
     (not triggerable remotely in (D)TLS).
9
   * Fix missing padding length check in mbedtls_rsa_rsaes_pkcs1_v15_decrypt
10
     required by PKCS1 v2.2
11 12
   * Fix potential integer overflow to buffer overflow in
     mbedtls_rsa_rsaes_pkcs1_v15_encrypt and mbedtls_rsa_rsaes_oaep_encrypt
13

14 15 16
Bugfix
   * Fix bug in mbedtls_mpi_add_mpi() that caused wrong results when the three
     arguments where the same (in-place doubling). Found and fixed by Janos
17
     Follath. #309
18 19
   * Fix potential build failures related to the 'apidoc' target, introduced
     in the previous patch release. Found by Robert Scheck. #390 #391
20
   * Fix issue in Makefile that prevented building using armar. #386
21 22
   * Fix memory leak that occured only when ECJPAKE was enabled and ECDHE and
     ECDSA was disabled in config.h . The leak didn't occur by default.
23 24 25
   * Fix an issue that caused valid certificates to be rejected whenever an
     expired or not yet valid certificate was parsed before a valid certificate
     in the trusted certificate list.
26

27 28 29 30
Changes
   * On ARM platforms, when compiling with -O0 with GCC, Clang or armcc5,
     don't use the optimized assembly for bignum multiplication. This removes
     the need to pass -fomit-frame-pointer to avoid a build error with -O0.
Simon Butcher's avatar
Simon Butcher committed
31
   * Disabled SSLv3 in the default configuration. 
32

33
= mbed TLS 2.2.1 released 2016-01-05
34

35 36 37 38
Security
   * Fix potential double free when mbedtls_asn1_store_named_data() fails to
     allocate memory. Only used for certificate generation, not triggerable
     remotely in SSL/TLS. Found by Rafał Przywara. #367
39 40 41 42
   * Disable MD5 handshake signatures in TLS 1.2 by default to prevent the
     SLOTH attack on TLS 1.2 server authentication (other attacks from the
     SLOTH paper do not apply to any version of mbed TLS or PolarSSL).
     https://www.mitls.org/pages/attacks/SLOTH
43

44
Bugfix
Simon Butcher's avatar
Simon Butcher committed
45
   * Fix over-restrictive length limit in GCM. Found by Andreas-N. #362
46 47 48
   * Fix bug in certificate validation that caused valid chains to be rejected
     when the first intermediate certificate has pathLenConstraint=0. Found by
     Nicholas Wilson. Introduced in mbed TLS 2.2.0. #280
49
   * Removed potential leak in mbedtls_rsa_rsassa_pkcs1_v15_sign(), found by
50
     JayaraghavendranK. #372
51 52 53 54 55
   * Fix suboptimal handling of unexpected records that caused interop issues
     with some peers over unreliable links. Avoid dropping an entire DTLS
     datagram if a single record in a datagram is unexpected, instead only
     drop the record and look at subsequent records (if any are present) in
     the same datagram. Found by jeannotlapin. #345
56

57
= mbed TLS 2.2.0 released 2015-11-04
58

59
Security
60 61 62
   * Fix potential double free if mbedtls_ssl_conf_psk() is called more than
     once and some allocation fails. Cannot be forced remotely. Found by Guido
     Vranken, Intelworks.
63 64
   * Fix potential heap corruption on Windows when
     mbedtls_x509_crt_parse_path() is passed a path longer than 2GB. Cannot be
65
     triggered remotely. Found by Guido Vranken, Intelworks.
66 67 68
   * Fix potential buffer overflow in some asn1_write_xxx() functions.
     Cannot be triggered remotely unless you create X.509 certificates based
     on untrusted input or write keys of untrusted origin. Found by Guido
69
     Vranken, Intelworks.
70 71 72 73
   * The X509 max_pathlen constraint was not enforced on intermediate
     certificates. Found by Nicholas Wilson, fix and tests provided by
     Janos Follath. #280 and #319

74 75 76 77 78
Features
   * Experimental support for EC J-PAKE as defined in Thread 1.0.0.
     Disabled by default as the specification might still change.
   * Added a key extraction callback to accees the master secret and key
     block. (Potential uses include EAP-TLS and Thread.)
79

80
Bugfix
81 82 83
   * Self-signed certificates were not excluded from pathlen counting,
     resulting in some valid X.509 being incorrectly rejected. Found and fix
     provided by Janos Follath. #319
84 85
   * Fix build error with configurations where ECDHE-PSK is the only key
     exchange. Found and fix provided by Chris Hammond. #270
86 87
   * Fix build error with configurations where RSA, RSA-PSK, ECDH-RSA or
     ECHD-ECDSA if the only key exchange. Multiple reports. #310
88 89
   * Fixed a bug causing some handshakes to fail due to some non-fatal alerts
     not being properly ignored. Found by mancha and Kasom Koht-arsa, #308
90 91 92
   * mbedtls_x509_crt_verify(_with_profile)() now also checks the key type and
     size/curve against the profile. Before that, there was no way to set a
     minimum key size for end-entity certificates with RSA keys. Found by
93
     Matthew Page of Scannex Electronics Ltd.
94 95
   * Fix failures in MPI on Sparc(64) due to use of bad assembly code.
     Found by Kurt Danielson. #292
96
   * Fix typo in name of the extKeyUsage OID. Found by inestlerode, #314
97 98 99
   * Fix bug in ASN.1 encoding of booleans that caused generated CA
     certificates to be rejected by some applications, including OS X
     Keychain. Found and fixed by Jonathan Leroy, Inikup.
100

101 102 103
Changes
   * Improved performance of mbedtls_ecp_muladd() when one of the scalars is 1
     or -1.
104 105 106

= mbed TLS 2.1.2 released 2015-10-06

107
Security
108
   * Added fix for CVE-2015-5291 to prevent heap corruption due to buffer
109 110
     overflow of the hostname or session ticket. Found by Guido Vranken,
     Intelworks.
111 112
   * Fix potential double-free if mbedtls_ssl_set_hs_psk() is called more than
     once in the same handhake and mbedtls_ssl_conf_psk() was used.
113 114
     Found and patch provided by Guido Vranken, Intelworks. Cannot be forced
     remotely.
115 116
   * Fix stack buffer overflow in pkcs12 decryption (used by
     mbedtls_pk_parse_key(file)() when the password is > 129 bytes.
117
     Found by Guido Vranken, Intelworks. Not triggerable remotely.
118
   * Fix potential buffer overflow in mbedtls_mpi_read_string().
119 120 121 122
     Found by Guido Vranken, Intelworks. Not exploitable remotely in the context
     of TLS, but might be in other uses. On 32 bit machines, requires reading a
     string of close to or larger than 1GB to exploit; on 64 bit machines, would
     require reading a string of close to or larger than 2^62 bytes.
123
   * Fix potential random memory allocation in mbedtls_pem_read_buffer()
124 125 126 127 128 129
     on crafted PEM input data. Found and fix provided by Guido Vranken,
     Intelworks. Not triggerable remotely in TLS. Triggerable remotely if you
     accept PEM data from an untrusted source.
   * Fix possible heap buffer overflow in base64_encoded() when the input
     buffer is 512MB or larger on 32-bit platforms. Found by Guido Vranken,
     Intelworks. Not trigerrable remotely in TLS.
130
   * Fix potential double-free if mbedtls_conf_psk() is called repeatedly on
131 132
     the same mbedtls_ssl_config object and memory allocation fails. Found by
     Guido Vranken, Intelworks. Cannot be forced remotely.
133 134 135
   * Fix potential heap buffer overflow in servers that perform client
     authentication against a crafted CA cert. Cannot be triggered remotely
     unless you allow third parties to pick trust CAs for client auth.
136
     Found by Guido Vranken, Intelworks.
137

138 139 140
Bugfix
   * Fix compile error in net.c with musl libc. Found and patch provided by
     zhasha (#278).
141
   * Fix macroization of 'inline' keyword when building as C++. (#279)
142

143 144 145
Changes
   * Added checking of hostname length in mbedtls_ssl_set_hostname() to ensure
     domain names are compliant with RFC 1035.
146 147
   * Fixed paths for check_config.h in example config files. (Found by bachp)
     (#291)
148

149
= mbed TLS 2.1.1 released 2015-09-17
150

151 152 153 154
Security
   * Add countermeasure against Lenstra's RSA-CRT attack for PKCS#1 v1.5
     signatures. (Found by Florian Weimer, Red Hat.)
     https://securityblog.redhat.com/2015/09/02/factoring-rsa-keys-with-tls-perfect-forward-secrecy/
155 156
   * Fix possible client-side NULL pointer dereference (read) when the client
     tries to continue the handshake after it failed (a misuse of the API).
157 158
     (Found and patch provided by Fabian Foerg, Gotham Digital Science using
     afl-fuzz.)
159

160 161
Bugfix
   * Fix warning when using a 64bit platform. (found by embedthis) (#275)
162 163 164
   * Fix off-by-one error in parsing Supported Point Format extension that
     caused some handshakes to fail.

165 166 167
Changes
   * Made X509 profile pointer const in mbedtls_ssl_conf_cert_profile() to allow
     use of mbedtls_x509_crt_profile_next. (found by NWilson)
168 169 170 171 172 173 174
   * When a client initiates a reconnect from the same port as a live
     connection, if cookie verification is available
     (MBEDTLS_SSL_DTLS_HELLO_VERIFY defined in config.h, and usable cookie
     callbacks set with mbedtls_ssl_conf_dtls_cookies()), this will be
     detected and mbedtls_ssl_read() will return
     MBEDTLS_ERR_SSL_CLIENT_RECONNECT - it is then possible to start a new
     handshake with the same context. (See RFC 6347 section 4.2.8.)
175

176
= mbed TLS 2.1.0 released 2015-09-04
177

178
Features
179 180
   * Added support for yotta as a build system.
   * Primary open source license changed to Apache 2.0 license.
181

182 183
Bugfix
   * Fix segfault in the benchmark program when benchmarking DHM.
184 185
   * Fix build error with CMake and pre-4.5 versions of GCC (found by Hugo
     Leisink).
186 187
   * Fix bug when parsing a ServerHello without extensions (found by David
     Sears).
188
   * Fix bug in CMake lists that caused libmbedcrypto.a not to be installed
189
     (found by Benoit Lecocq).
190 191
   * Fix bug in Makefile that caused libmbedcrypto and libmbedx509 not to be
     installed (found by Rawi666).
192
   * Fix compile error with armcc 5 with --gnu option.
193 194
   * Fix bug in Makefile that caused programs not to be installed correctly
     (found by robotanarchy) (#232).
195 196
   * Fix bug in Makefile that prevented from installing without building the
     tests (found by robotanarchy) (#232).
197 198 199
   * Fix missing -static-libgcc when building shared libraries for Windows
     with make.
   * Fix link error when building shared libraries for Windows with make.
200
   * Fix error when loading libmbedtls.so.
201 202
   * Fix bug in mbedtls_ssl_conf_default() that caused the default preset to
     be always used (found by dcb314) (#235)
203 204 205
   * Fix bug in mbedtls_rsa_public() and mbedtls_rsa_private() that could
     result trying to unlock an unlocked mutex on invalid input (found by
     Fredrik Axelsson) (#257)
206 207 208 209 210 211 212
   * Fix -Wshadow warnings (found by hnrkp) (#240)
   * Fix memory corruption on client with overlong PSK identity, around
     SSL_MAX_CONTENT_LEN or higher - not triggerrable remotely (found by
     Aleksandrs Saveljevs) (#238)
   * Fix unused function warning when using MBEDTLS_MDx_ALT or
     MBEDTLS_SHAxxx_ALT (found by Henrik) (#239)
   * Fix memory corruption in pkey programs (found by yankuncheng) (#210)
213

214 215
Changes
   * The PEM parser now accepts a trailing space at end of lines (#226).
216 217 218
   * It is now possible to #include a user-provided configuration file at the
     end of the default config.h by defining MBEDTLS_USER_CONFIG_FILE on the
     compiler's command line.
219 220 221
   * When verifying a certificate chain, if an intermediate certificate is
     trusted, no later cert is checked. (suggested by hannes-landeholm)
     (#220).
222 223 224 225
   * Prepend a "thread identifier" to debug messages (issue pointed out by
     Hugo Leisink) (#210).
   * Add mbedtls_ssl_get_max_frag_len() to query the current maximum fragment
     length.
226

Paul Bakker's avatar
Paul Bakker committed
227
= mbed TLS 2.0.0 released 2015-07-13
228

229
Features
230 231 232 233 234 235
   * Support for DTLS 1.0 and 1.2 (RFC 6347).
   * Ability to override core functions from MDx, SHAx, AES and DES modules
     with custom implementation (eg hardware accelerated), complementing the
     ability to override the whole module.
   * New server-side implementation of session tickets that rotate keys to
     preserve forward secrecy, and allows sharing across multiple contexts.
236 237 238 239 240 241
   * Added a concept of X.509 cerificate verification profile that controls
     which algorithms and key sizes (curves for ECDSA) are acceptable.
   * Expanded configurability of security parameters in the SSL module with
     mbedtls_ssl_conf_dhm_min_bitlen() and mbedtls_ssl_conf_sig_hashes().
   * Introduced a concept of presets for SSL security-relevant configuration
     parameters.
242

243
API Changes
244 245
   * The library has been split into libmbedcrypto, libmbedx509, libmbedtls.
     You now need to link to all of them if you use TLS for example.
246
   * All public identifiers moved to the mbedtls_* or MBEDTLS_* namespace.
247
     Some names have been further changed to make them more consistent.
248
     Migration helpers scripts/rename.pl and include/mbedlts/compat-1.3.h are
249
     provided. Full list of renamings in scripts/data_files/rename-1.3-2.0.txt
250
   * Renamings of fields inside structures, not covered by the previous list:
251 252 253
     mbedtls_cipher_info_t.key_length -> key_bitlen
     mbedtls_cipher_context_t.key_length -> key_bitlen
     mbedtls_ecp_curve_info.size -> bit_size
254
   * Headers are now found in the 'mbedtls' directory (previously 'polarssl').
255
   * The following _init() functions that could return errors have
256
     been split into an _init() that returns void and another function that
257
     should generally be the first function called on this context after init:
258
     mbedtls_ssl_init() -> mbedtls_ssl_setup()
259
     mbedtls_ccm_init() -> mbedtls_ccm_setkey()
260
     mbedtls_gcm_init() -> mbedtls_gcm_setkey()
261 262
     mbedtls_hmac_drbg_init() -> mbedtls_hmac_drbg_seed(_buf)()
     mbedtls_ctr_drbg_init()  -> mbedtls_ctr_drbg_seed()
263
     Note that for mbedtls_ssl_setup(), you need to be done setting up the
264
     ssl_config structure before calling it.
265
   * Most ssl_set_xxx() functions (all except ssl_set_bio(), ssl_set_hostname(),
266 267 268 269
     ssl_set_session() and ssl_set_client_transport_id(), plus
     ssl_legacy_renegotiation()) have been renamed to mbedtls_ssl_conf_xxx()
     (see rename.pl and compat-1.3.h above) and their first argument's type
     changed from ssl_context to ssl_config.
270 271
   * ssl_set_bio() changed signature (contexts merged, order switched, one
     additional callback for read-with-timeout).
272 273 274 275 276
   * The following functions have been introduced and must be used in callback
     implementations (SNI, PSK) instead of their *conf counterparts:
     mbedtls_ssl_set_hs_own_cert()
     mbedtls_ssl_set_hs_ca_chain()
     mbedtls_ssl_set_hs_psk()
277
   * mbedtls_ssl_conf_ca_chain() lost its last argument (peer_cn), now set
278
     using mbedtls_ssl_set_hostname().
279
   * mbedtls_ssl_conf_session_cache() changed prototype (only one context
280
     pointer, parameters reordered).
281 282
   * On server, mbedtls_ssl_conf_session_tickets_cb() must now be used in
     place of mbedtls_ssl_conf_session_tickets() to enable session tickets.
283 284
   * The SSL debug callback gained two new arguments (file name, line number).
   * Debug modes were removed.
285
   * mbedtls_ssl_conf_truncated_hmac() now returns void.
286
   * mbedtls_memory_buffer_alloc_init() now returns void.
287 288 289
   * X.509 verification flags are now an uint32_t. Affect the signature of:
     mbedtls_ssl_get_verify_result()
     mbedtls_x509_ctr_verify_info()
290
     mbedtls_x509_crt_verify() (flags, f_vrfy -> needs to be updated)
291
     mbedtls_ssl_conf_verify() (f_vrfy -> needs to be updated)
292 293 294 295 296 297
   * The following functions changed prototype to avoid an in-out length
     parameter:
     mbedtls_base64_encode()
     mbedtls_base64_decode()
     mbedtls_mpi_write_string()
     mbedtls_dhm_calc_secret()
298 299
   * In the NET module, all "int" and "int *" arguments for file descriptors
     changed type to "mbedtls_net_context *".
300
   * net_accept() gained new arguments for the size of the client_ip buffer.
301 302
   * In the threading layer, mbedtls_mutex_init() and mbedtls_mutex_free() now
     return void.
303 304
   * ecdsa_write_signature() gained an addtional md_alg argument and
     ecdsa_write_signature_det() was deprecated.
305
   * pk_sign() no longer accepts md_alg == POLARSSL_MD_NONE with ECDSA.
306 307
   * Last argument of x509_crt_check_key_usage() and
     mbedtls_x509write_crt_set_key_usage() changed from int to unsigned.
308 309 310
   * test_ca_list (from certs.h) is renamed to test_cas_pem and is only
     available if POLARSSL_PEM_PARSE_C is defined (it never worked without).
   * Test certificates in certs.c are no longer guaranteed to be nul-terminated
311
     strings; use the new *_len variables instead of strlen().
312 313 314
   * Functions mbedtls_x509_xxx_parse(), mbedtls_pk_parse_key(),
     mbedtls_pk_parse_public_key() and mbedtls_dhm_parse_dhm() now expect the
     length parameter to include the terminating null byte for PEM input.
315
   * Signature of mpi_mul_mpi() changed to make the last argument unsigned
316 317
   * calloc() is now used instead of malloc() everywhere. API of platform
     layer and the memory_buffer_alloc module changed accordingly.
318
     (Thanks to Mansour Moufid for helping with the replacement.)
319 320
   * Change SSL_DISABLE_RENEGOTIATION config.h flag to SSL_RENEGOTIATION
     (support for renegotiation now needs explicit enabling in config.h).
321 322
   * Split MBEDTLS_HAVE_TIME into MBEDTLS_HAVE_TIME and MBEDTLS_HAVE_TIME_DATE
     in config.h
323 324
   * net_connect() and net_bind() have a new 'proto' argument to choose
     between TCP and UDP, using the macros NET_PROTO_TCP or NET_PROTO_UDP.
325
     Their 'port' argument type is changed to a string.
326 327 328
   * Some constness fixes

Removals
329
   * Removed mbedtls_ecp_group_read_string(). Only named groups are supported.
330 331
   * Removed mbedtls_ecp_sub() and mbedtls_ecp_add(), use
     mbedtls_ecp_muladd().
332 333 334
   * Removed individual mdX_hmac, shaX_hmac, mdX_file and shaX_file functions
     (use generic functions from md.h)
   * Removed mbedtls_timing_msleep(). Use mbedtls_net_usleep() or a custom
335
     waiting function.
336
   * Removed test DHM parameters from the test certs module.
337 338 339 340 341 342 343 344 345 346 347
   * Removed the PBKDF2 module (use PKCS5).
   * Removed POLARSSL_ERROR_STRERROR_BC (use mbedtls_strerror()).
   * Removed compat-1.2.h (helper for migrating from 1.2 to 1.3).
   * Removed openssl.h (very partial OpenSSL compatibility layer).
   * Configuration options POLARSSL_HAVE_LONGLONG was removed (now always on).
   * Configuration options POLARSSL_HAVE_INT8 and POLARSSL_HAVE_INT16 have
     been removed (compiler is required to support 32-bit operations).
   * Configuration option POLARSSL_HAVE_IPV6 was removed (always enabled).
   * Removed test program o_p_test, the script compat.sh does more.
   * Removed test program ssl_test, superseded by ssl-opt.sh.
   * Removed helper script active-config.pl
348 349 350 351

New deprecations
   * md_init_ctx() is deprecated in favour of md_setup(), that adds a third
     argument (allowing memory savings if HMAC is not used)
352

353
Semi-API changes (technically public, morally private)
354 355
   * Renamed a few headers to include _internal in the name. Those headers are
     not supposed to be included by users.
356 357
   * Changed md_info_t into an opaque structure (use md_get_xxx() accessors).
   * Changed pk_info_t into an opaque structure.
358 359
   * Changed cipher_base_t into an opaque structure.
   * Removed sig_oid2 and rename sig_oid1 to sig_oid in x509_crt and x509_crl.
360
   * x509_crt.key_usage changed from unsigned char to unsigned int.
361 362
   * Removed r and s from ecdsa_context
   * Removed mode from des_context and des3_context
363

364
Default behavior changes
365
   * The default minimum TLS version is now TLS 1.0.
366 367
   * RC4 is now blacklisted by default in the SSL/TLS layer, and excluded from the
     default ciphersuite list returned by ssl_list_ciphersuites()
368 369
   * Support for receiving SSLv2 ClientHello is now disabled by default at
     compile time.
370
   * The default authmode for SSL/TLS clients is now REQUIRED.
371 372 373
   * Support for RSA_ALT contexts in the PK layer is now optional. Since is is
     enabled in the default configuration, this is only noticeable if using a
     custom config.h
374
   * Default DHM parameters server-side upgraded from 1024 to 2048 bits.
375 376
   * A minimum RSA key size of 2048 bits is now enforced during ceritificate
     chain verification.
377
   * Negotiation of truncated HMAC is now disabled by default on server too.
378 379 380 381 382 383
   * The following functions are now case-sensitive:
     mbedtls_cipher_info_from_string()
     mbedtls_ecp_curve_info_from_name()
     mbedtls_md_info_from_string()
     mbedtls_ssl_ciphersuite_from_string()
     mbedtls_version_check_feature()
384

385
Requirement changes
386
   * The minimum MSVC version required is now 2010 (better C99 support).
387
   * The NET layer now unconditionnaly relies on getaddrinfo() and select().
388
   * Compiler is required to support C99 types such as long long and uint32_t.
389

390
API changes from the 1.4 preview branch
391 392
   * ssl_set_bio_timeout() was removed, split into mbedtls_ssl_set_bio() with
     new prototype, and mbedtls_ssl_set_read_timeout().
393 394 395 396
   * The following functions now return void:
     mbedtls_ssl_conf_transport()
     mbedtls_ssl_conf_max_version()
     mbedtls_ssl_conf_min_version()
397 398 399 400
   * DTLS no longer hard-depends on TIMING_C, but uses a callback interface
     instead, see mbedtls_ssl_set_timer_cb(), with the Timing module providing
     an example implementation, see mbedtls_timing_delay_context and
     mbedtls_timing_set/get_delay().
401 402
   * With UDP sockets, it is no longer necessary to call net_bind() again
     after a successful net_accept().
403

404 405 406
Changes
   * mbedtls_ctr_drbg_random() and mbedtls_hmac_drbg_random() are now
     thread-safe if MBEDTLS_THREADING_C is enabled.
407 408
   * Reduced ROM fooprint of SHA-256 and added an option to reduce it even
     more (at the expense of performance) MBEDTLS_SHA256_SMALLER.
409

410 411 412
= mbed TLS 1.3 branch

Security
413
   * With authmode set to SSL_VERIFY_OPTIONAL, verification of keyUsage and
414 415
     extendedKeyUsage on the leaf certificate was lost (results not accessible
     via ssl_get_verify_results()).
416 417
   * Add countermeasure against "Lucky 13 strikes back" cache-based attack,
     https://dl.acm.org/citation.cfm?id=2714625
418 419

Features
420 421
   * Improve ECC performance by using more efficient doubling formulas
     (contributed by Peter Dettman).
422
   * Add x509_crt_verify_info() to display certificate verification results.
423
   * Add support for reading DH parameters with privateValueLength included
424
     (contributed by Daniel Kahn Gillmor).
425 426
   * Add support for bit strings in X.509 names (request by Fredrik Axelsson).
   * Add support for id-at-uniqueIdentifier in X.509 names.
427 428 429 430
   * Add support for overriding snprintf() (except on Windows) and exit() in
     the platform layer.
   * Add an option to use macros instead of function pointers in the platform
     layer (helps get rid of unwanted references).
431 432
   * Improved Makefiles for Windows targets by fixing library targets and making
     cross-compilation easier (thanks to Alon Bar-Lev).
433 434 435 436 437 438
   * The benchmark program also prints heap usage for public-key primitives
     if POLARSSL_MEMORY_BUFFER_ALLOC_C and POLARSSL_MEMORY_DEBUG are defined.
   * New script ecc-heap.sh helps measuring the impact of ECC parameters on
     speed and RAM (heap only for now) usage.
   * New script memory.sh helps measuring the ROM and RAM requirements of two
     reduced configurations (PSK-CCM and NSA suite B).
439
   * Add config flag POLARSSL_DEPRECATED_WARNING (off by default) to produce
440
     warnings on use of deprecated functions (with GCC and Clang only).
441
   * Add config flag POLARSSL_DEPRECATED_REMOVED (off by default) to produce
442
     errors on use of deprecated functions.
443 444

Bugfix
445
   * Fix compile errors with PLATFORM_NO_STD_FUNCTIONS.
446
   * Fix compile error with PLATFORM_EXIT_ALT (thanks to Rafał Przywara).
447 448
   * Fix bug in entropy.c when THREADING_C is also enabled that caused
     entropy_free() to crash (thanks to Rafał Przywara).
449 450
   * Fix memory leak when gcm_setkey() and ccm_setkey() are used more than
     once on the same context.
451 452
   * Fix bug in ssl_mail_client when password is longer that username (found
     by Bruno Pape).
453 454
   * Fix undefined behaviour (memcmp( NULL, NULL, 0 );) in X.509 modules
     (detected by Clang's 3.6 UBSan).
455 456
   * mpi_size() and mpi_msb() would segfault when called on an mpi that is
     initialized but not set (found by pravic).
457 458
   * Fix detection of support for getrandom() on Linux (reported by syzzer) by
     doing it at runtime (using uname) rather that compile time.
459
   * Fix handling of symlinks by "make install" (found by Gaël PORTAY).
460 461 462
   * Fix potential NULL pointer dereference (not trigerrable remotely) when
     ssl_write() is called before the handshake is finished (introduced in
     1.3.10) (first reported by Martin Blumenstingl).
463 464
   * Fix bug in pk_parse_key() that caused some valid private EC keys to be
     rejected.
465
   * Fix bug in Via Padlock support (found by Nikos Mavrogiannopoulos).
466
   * Fix thread safety bug in RSA operations (found by Fredrik Axelsson).
467 468
   * Fix hardclock() (only used in the benchmarking program) with some
     versions of mingw64 (found by kxjhlele).
469
   * Fix warnings from mingw64 in timing.c (found by kxjklele).
470 471
   * Fix potential unintended sign extension in asn1_get_len() on 64-bit
     platforms.
472
   * Fix potential memory leak in ssl_set_psk() (found by Mansour Moufid).
473 474 475
   * Fix compile error when POLARSSL_SSL_DISABLE_RENEGOTATION and
     POLARSSL_SSL_SSESSION_TICKETS where both enabled in config.h (introduced
     in 1.3.10).
476
   * Add missing extern "C" guard in aesni.h (reported by amir zamani).
477 478
   * Add missing dependency on SHA-256 in some x509 programs (reported by
     Gergely Budai).
479 480
   * Fix bug related to ssl_set_curves(): the client didn't check that the
     curve picked by the server was actually allowed.
481 482

Changes
483 484 485
   * Remove bias in mpi_gen_prime (contributed by Pascal Junod).
   * Remove potential sources of timing variations (some contributed by Pascal
     Junod).
486
   * Options POLARSSL_HAVE_INT8 and POLARSSL_HAVE_INT16 are deprecated.
487
   * Enabling POLARSSL_NET_C without POLARSSL_HAVE_IPV6 is deprecated.
488
   * compat-1.2.h and openssl.h are deprecated.
489
   * Adjusting/overriding CFLAGS and LDFLAGS with the make build system is now
490 491
     more flexible (warning: OFLAGS is not used any more) (see the README)
     (contributed by Alon Bar-Lev).
492
   * ssl_set_own_cert() no longer calls pk_check_pair() since the
493
     performance impact was bad for some users (this was introduced in 1.3.10).
494 495
   * Move from SHA-1 to SHA-256 in example programs using signatures
     (suggested by Thorsten Mühlfelder).
496 497 498 499
   * Remove some unneeded inclusions of header files from the standard library
     "minimize" others (eg use stddef.h if only size_t is needed).
   * Change #include lines in test files to use double quotes instead of angle
     brackets for uniformity with the rest of the code.
500
   * Remove dependency on sscanf() in X.509 parsing modules.
501

502
= mbed TLS 1.3.10 released 2015-02-09
503 504
Security
   * NULL pointer dereference in the buffer-based allocator when the buffer is
505
     full and polarssl_free() is called (found by Mark Hasemeyer)
506 507
     (only possible if POLARSSL_MEMORY_BUFFER_ALLOC_C is enabled, which it is
     not by default).
508
   * Fix remotely-triggerable uninitialised pointer dereference caused by
509
     crafted X.509 certificate (TLS server is not affected if it doesn't ask for a
510
     client certificate) (found using Codenomicon Defensics).
511
   * Fix remotely-triggerable memory leak caused by crafted X.509 certificates
512 513 514 515
     (TLS server is not affected if it doesn't ask for a client certificate)
     (found using Codenomicon Defensics).
   * Fix potential stack overflow while parsing crafted X.509 certificates
     (TLS server is not affected if it doesn't ask for a client certificate)
516
     (found using Codenomicon Defensics).
517 518 519
   * Fix timing difference that could theoretically lead to a
     Bleichenbacher-style attack in the RSA and RSA-PSK key exchanges
     (reported by Sebastian Schinzel).
520

521
Features
522 523 524
   * Add support for FALLBACK_SCSV (draft-ietf-tls-downgrade-scsv).
   * Add support for Extended Master Secret (draft-ietf-tls-session-hash).
   * Add support for Encrypt-then-MAC (RFC 7366).
525
   * Add function pk_check_pair() to test if public and private keys match.
526
   * Add x509_crl_parse_der().
527 528
   * Add compile-time option POLARSSL_X509_MAX_INTERMEDIATE_CA to limit the
     length of an X.509 verification chain.
529
   * Support for renegotiation can now be disabled at compile-time
530
   * Support for 1/n-1 record splitting, a countermeasure against BEAST.
Paul Bakker's avatar
Paul Bakker committed
531
   * Certificate selection based on signature hash, preferring SHA-1 over SHA-2
532
     for pre-1.2 clients when multiple certificates are available.
533 534
   * Add support for getrandom() syscall on recent Linux kernels with Glibc or
     a compatible enough libc (eg uClibc).
535
   * Add ssl_set_arc4_support() to make it easier to disable RC4 at runtime
536
     while using the default ciphersuite list.
537 538
   * Added new error codes and debug messages about selection of
     ciphersuite/certificate.
539

540 541 542
Bugfix
   * Stack buffer overflow if ctr_drbg_update() is called with too large
     add_len (found by Jean-Philippe Aumasson) (not triggerable remotely).
543 544
   * Possible buffer overflow of length at most POLARSSL_MEMORY_ALIGN_MULTIPLE
     if memory_buffer_alloc_init() was called with buf not aligned and len not
545 546
     a multiple of POLARSSL_MEMORY_ALIGN_MULTIPLE (not triggerable remotely).
   * User set CFLAGS were ignored by Cmake with gcc (introduced in 1.3.9, found
547
     by Julian Ospald).
548
   * Fix potential undefined behaviour in Camellia.
549 550
   * Fix potential failure in ECDSA signatures when POLARSSL_ECP_MAX_BITS is a
     multiple of 8 (found by Gergely Budai).
551 552
   * Fix unchecked return code in x509_crt_parse_path() on Windows (found by
     Peter Vaskovic).
553
   * Fix assembly selection for MIPS64 (thanks to James Cowgill).
554 555
   * ssl_get_verify_result() now works even if the handshake was aborted due
     to a failed verification (found by Fredrik Axelsson).
556 557 558 559
   * Skip writing and parsing signature_algorithm extension if none of the
     key exchanges enabled needs certificates. This fixes a possible interop
     issue with some servers when a zero-length extension was sent. (Reported
     by Peter Dettman.)
560 561
   * On a 0-length input, base64_encode() did not correctly set output length
     (found by Hendrik van den Boogaard).
562

563 564 565
Changes
   * Use deterministic nonces for AEAD ciphers in TLS by default (possible to
     switch back to random with POLARSSL_SSL_AEAD_RANDOM_IV in config.h).
566
   * Blind RSA private operations even when POLARSSL_RSA_NO_CRT is defined.
567
   * ssl_set_own_cert() now returns an error on key-certificate mismatch.
568
   * Forbid repeated extensions in X.509 certificates.
569
   * debug_print_buf() now prints a text view in addition to hexadecimal.
570 571
   * A specific error is now returned when there are ciphersuites in common
     but none of them is usable due to external factors such as no certificate
572
     with a suitable (extended)KeyUsage or curve or no PSK set.
573
   * It is now possible to disable negotiation of truncated HMAC server-side
574
     at runtime with ssl_set_truncated_hmac().
575 576
   * Example programs for SSL client and server now disable SSLv3 by default.
   * Example programs for SSL client and server now disable RC4 by default.
577
   * Use platform.h in all test suites and programs.
578

Paul Bakker's avatar
Paul Bakker committed
579
= PolarSSL 1.3.9 released 2014-10-20
580 581 582
Security
   * Lowest common hash was selected from signature_algorithms extension in
     TLS 1.2 (found by Darren Bane) (introduced in 1.3.8).
583
   * Remotely-triggerable memory leak when parsing some X.509 certificates
Paul Bakker's avatar
Paul Bakker committed
584 585
     (server is not affected if it doesn't ask for a client certificate)
     (found using Codenomicon Defensics).
586
   * Remotely-triggerable memory leak when parsing crafted ClientHello
Paul Bakker's avatar
Paul Bakker committed
587 588
     (not affected if ECC support was compiled out) (found using Codenomicon
     Defensics).
589

590 591
Bugfix
   * Support escaping of commas in x509_string_to_names()
592
   * Fix compile error in ssl_pthread_server (found by Julian Ospald).
593
   * Fix net_accept() regarding non-blocking sockets (found by Luca Pesce).
594
   * Don't print uninitialised buffer in ssl_mail_client (found by Marc Abel).
595
   * Fix warnings from Clang's scan-build (contributed by Alfred Klomp).
596 597
   * Fix compile error in timing.c when POLARSSL_NET_C and POLARSSL_SELFTEST
     are defined but not POLARSSL_HAVE_TIME (found by Stephane Di Vito).
598
   * Remove non-existent file from VS projects (found by Peter Vaskovic).
599 600
   * ssl_read() could return non-application data records on server while
     renegotation was pending, and on client when a HelloRequest was received.
601 602
   * Server-initiated renegotiation would fail with non-blocking I/O if the
     write callback returned WANT_WRITE when requesting renegotiation.
603 604
   * ssl_close_notify() could send more than one message in some circumstances
     with non-blocking I/O.
605
   * Fix compiler warnings on iOS (found by Sander Niemeijer).
606
   * x509_crt_parse() did not increase total_failed on PEM error
607
   * Fix compile error with armcc in mpi_is_prime()
608 609
   * Fix potential bad read in parsing ServerHello (found by Adrien
     Vialletelle).
610

611 612 613
Changes
   * Ciphersuites using SHA-256 or SHA-384 now require TLS 1.x (there is no
     standard defining how to use SHA-2 with SSL 3.0).
614 615
   * Ciphersuites using RSA-PSK key exchange new require TLS 1.x (the spec is
     ambiguous on how to encode some packets with SSL 3.0).
616 617
   * Made buffer size in pk_write_(pub)key_pem() more dynamic, eg smaller if
     RSA is disabled, larger if POLARSSL_MPI_MAX_SIZE is larger.
618 619
   * ssl_read() now returns POLARSSL_ERR_NET_WANT_READ rather than
     POLARSSL_ERR_SSL_UNEXPECTED_MESSAGE on harmless alerts.
620 621
   * POLARSSL_MPI_MAX_SIZE now defaults to 1024 in order to allow 8192 bits
     RSA keys.
622
   * Accept spaces at end of line or end of buffer in base64_decode().
623 624
   * X.509 certificates with more than one AttributeTypeAndValue per
     RelativeDistinguishedName are not accepted any more.
625

Paul Bakker's avatar
Paul Bakker committed
626
= PolarSSL 1.3.8 released 2014-07-11
627 628 629 630 631
Security
   * Fix length checking for AEAD ciphersuites (found by Codenomicon).
     It was possible to crash the server (and client) using crafted messages
     when a GCM suite was chosen.

Paul Bakker's avatar
Paul Bakker committed
632 633 634
Features
   * Add CCM module and cipher mode to Cipher Layer
   * Support for CCM and CCM_8 ciphersuites
635 636
   * Support for parsing and verifying RSASSA-PSS signatures in the X.509
     modules (certificates, CRLs and CSRs).
637
   * Blowfish in the cipher layer now supports variable length keys.
638 639
   * Add example config.h for PSK with CCM, optimized for low RAM usage.
   * Optimize for RAM usage in example config.h for NSA Suite B profile.
640 641
   * Add POLARSSL_REMOVE_ARC4_CIPHERSUITES to allow removing RC4 ciphersuites
     from the default list (inactive by default).
Paul Bakker's avatar
Paul Bakker committed
642 643
   * Add server-side enforcement of sent renegotiation requests
     (ssl_set_renegotiation_enforced())
644 645
   * Add SSL_CIPHERSUITES config.h flag to allow specifying a list of
     ciphersuites to use and save some memory if the list is small.
Paul Bakker's avatar
Paul Bakker committed
646

647 648 649
Changes
   * Add LINK_WITH_PTHREAD option in CMake for explicit linking that is
     required on some platforms (e.g. OpenBSD)
650 651
   * Migrate zeroizing of data to polarssl_zeroize() instead of memset()
     against unwanted compiler optimizations
652
   * md_list() now returns hashes strongest first
653 654
   * Selection of hash for signing ServerKeyExchange in TLS 1.2 now picks
     strongest offered by client.
Paul Bakker's avatar
Paul Bakker committed
655 656
   * All public contexts have _init() and _free() functions now for simpler
     usage pattern
657

658 659
Bugfix
   * Fix in debug_print_msg()
Paul Bakker's avatar
Paul Bakker committed
660
   * Enforce alignment in the buffer allocator even if buffer is not aligned
Paul Bakker's avatar
Paul Bakker committed
661
   * Remove less-than-zero checks on unsigned numbers
662 663
   * Stricter check on SSL ClientHello internal sizes compared to actual packet
     size (found by TrustInSoft)
664 665 666 667
   * Fix WSAStartup() return value check (found by Peter Vaskovic)
   * Other minor issues (found by Peter Vaskovic)
   * Fix symlink command for cross compiling with CMake (found by Andre
     Heinecke)
668
   * Fix DER output of gen_key app (found by Gergely Budai)
669
   * Very small records were incorrectly rejected when truncated HMAC was in
670 671
     use with some ciphersuites and versions (RC4 in all versions, CBC with
     versions < TLS 1.1).
672 673 674 675
   * Very large records using more than 224 bytes of padding were incorrectly
     rejected with CBC-based ciphersuites and TLS >= 1.1
   * Very large records using less padding could cause a buffer overread of up
     to 32 bytes with CBC-based ciphersuites and TLS >= 1.1
676 677
   * Restore ability to use a v1 cert as a CA if trusted locally. (This had
     been removed in 1.3.6.)
678 679 680
   * Restore ability to locally trust a self-signed cert that is not a proper
     CA for use as an end entity certificate. (This had been removed in
     1.3.6.)
681
   * Fix preprocessor checks for bn_mul PPC asm (found by Barry K. Nathan).
682 683
   * Use \n\t rather than semicolons for bn_mul asm, since some assemblers
     interpret semicolons as comment delimiters (found by Barry K. Nathan).
684 685
   * Fix off-by-one error in parsing Supported Point Format extension that
     caused some handshakes to fail.
686 687 688
   * Fix possible miscomputation of the premaster secret with DHE-PSK key
     exchange that caused some handshakes to fail with other implementations.
     (Failure rate <= 1/255 with common DHM moduli.)
689
   * Disable broken Sparc64 bn_mul assembly (found by Florian Obser).
690 691
   * Fix base64_decode() to return and check length correctly (in case of
     tight buffers)
692 693
   * Fix mpi_write_string() to write "00" as hex output for empty MPI (found
     by Hui Dong)
694

695
= PolarSSL 1.3.7 released on 2014-05-02
696
Features
697 698
   * debug_set_log_mode() added to determine raw or full logging
   * debug_set_threshold() added to ignore messages over threshold level
699 700
   * version_check_feature() added to check for compile-time options at
     run-time
701

702 703 704
Changes
   * POLARSSL_CONFIG_OPTIONS has been removed. All values are individually
     checked and filled in the relevant module headers
705
   * Debug module only outputs full lines instead of parts
706
   * Better support for the different Attribute Types from IETF PKIX (RFC 5280)
707
   * AES-NI now compiles with "old" assemblers too
708
   * Ciphersuites based on RC4 now have the lowest priority by default
709

Paul Bakker's avatar
Paul Bakker committed
710 711 712
Bugfix
   * Only iterate over actual certificates in ssl_write_certificate_request()
     (found by Matthew Page)
Paul Bakker's avatar
Paul Bakker committed
713 714
   * Typos in platform.c and pkcs11.c (found by Daniel Phillips and Steffan
     Karger)
715
   * cert_write app should use subject of issuer certificate as issuer of cert
716 717
   * Fix false reject in padding check in ssl_decrypt_buf() for CBC
     ciphersuites, for full SSL frames of data.
718 719
   * Improve interoperability by not writing extension length in ClientHello /
     ServerHello when no extensions are present (found by Matthew Page)
720
   * rsa_check_pubkey() now allows an E up to N
721
   * On OpenBSD, use arc4random_buf() instead of rand() to prevent warnings
722 723
   * mpi_fill_random() was creating numbers larger than requested on
     big-endian platform when size was not an integer number of limbs
724
   * Fix dependencies issues in X.509 test suite.
725
   * Some parts of ssl_tls.c were compiled even when the module was disabled.
726
   * Fix detection of DragonflyBSD in net.c (found by Markus Pfeiffer)
727 728
   * Fix detection of Clang on some Apple platforms with CMake
     (found by Barry K. Nathan)
Paul Bakker's avatar
Paul Bakker committed
729

Paul Bakker's avatar
Paul Bakker committed
730
= PolarSSL 1.3.6 released on 2014-04-11
731

732 733
Features
   * Support for the ALPN SSL extension
734
   * Add option 'use_dev_random' to gen_key application
735
   * Enable verification of the keyUsage extension for CA and leaf
736
     certificates (POLARSSL_X509_CHECK_KEY_USAGE)
737 738
   * Enable verification of the extendedKeyUsage extension
     (POLARSSL_X509_CHECK_EXTENDED_KEY_USAGE)
739

740 741
Changes
   * x509_crt_info() now prints information about parsed extensions as well
742 743
   * pk_verify() now returns a specific error code when the signature is valid
     but shorter than the supplied length.
744
   * Use UTC time to check certificate validity.
745
   * Reject certificates with times not in UTC, per RFC 5280.
746

747 748 749
Security
   * Avoid potential timing leak in ecdsa_sign() by blinding modular division.
     (Found by Watson Ladd.)
750 751 752 753
   * The notAfter date of some certificates was no longer checked since 1.3.5.
     This affects certificates in the user-supplied chain except the top
     certificate. If the user-supplied chain contains only one certificates,
     it is not affected (ie, its notAfter date is properly checked).
754 755
   * Prevent potential NULL pointer dereference in ssl_read_record() (found by
     TrustInSoft)
756

757 758
Bugfix
   * The length of various ClientKeyExchange messages was not properly checked.
759
   * Some example server programs were not sending the close_notify alert.
760 761
   * Potential memory leak in mpi_exp_mod() when error occurs during
     calculation of RR.
762
   * Fixed malloc/free default #define in platform.c (found by Gergely Budai).
763 764
   * Fixed type which made POLARSSL_ENTROPY_FORCE_SHA256 uneffective (found by
     Gergely Budai).
765 766
   * Fix #include path in ecdsa.h which wasn't accepted by some compilers.
     (found by Gergely Budai)
767 768
   * Fix compile errors when POLARSSL_ERROR_STRERROR_BC is undefined (found by
     Shuo Chen).
769 770
   * oid_get_numeric_string() used to truncate the output without returning an
     error if the output buffer was just 1 byte too small.
771
   * dhm_parse_dhm() (hence dhm_parse_dhmfile()) did not set dhm->len.
772 773
   * Calling pk_debug() on an RSA-alt key would segfault.
   * pk_get_size() and pk_get_len() were off by a factor 8 for RSA-alt keys.
774 775
   * Potential buffer overwrite in pem_write_buffer() because of low length
     indication (found by Thijs Alkemade)
776 777
   * EC curves constants, which should be only in ROM since 1.3.3, were also
     stored in RAM due to missing 'const's (found by Gergely Budai).
778

779
= PolarSSL 1.3.5 released on 2014-03-26
Paul Bakker's avatar
Paul Bakker committed
780 781
Features
   * HMAC-DRBG as a separate module
782
   * Option to set the Curve preference order (disabled by default)
783
   * Single Platform compatilibity layer (for memory / printf / fprintf)
784
   * Ability to provide alternate timing implementation
785 786
   * Ability to force the entropy module to use SHA-256 as its basis
     (POLARSSL_ENTROPY_FORCE_SHA256)
787 788
   * Testing script ssl-opt.sh added for testing 'live' ssl option
     interoperability against OpenSSL and PolarSSL
789
   * Support for reading EC keys that use SpecifiedECDomain in some cases.
790
   * Entropy module now supports seed writing and reading
791 792 793

Changes
   * Deprecated the Memory layer
794 795
   * entropy_add_source(), entropy_update_manual() and entropy_gather()
     now thread-safe if POLARSSL_THREADING_C defined
796
   * Improvements to the CMake build system, contributed by Julian Ospald.
797 798
   * Work around a bug of the version of Clang shipped by Apple with Mavericks
     that prevented bignum.c from compiling. (Reported by Rafael Baptista.)
799 800
   * Revamped the compat.sh interoperatibility script to include support for
     testing against GnuTLS
801
   * Deprecated ssl_set_own_cert_rsa() and ssl_set_own_cert_rsa_alt()
802
   * Improvements to tests/Makefile, contributed by Oden Eriksson.
Paul Bakker's avatar
Paul Bakker committed
803

804 805
Security
   * Forbid change of server certificate during renegotiation to prevent
806
     "triple handshake" attack when authentication mode is 'optional' (the
807
     attack was already impossible when authentication is required).
808
   * Check notBefore timestamp of certificates and CRLs from the future.
809
   * Forbid sequence number wrapping
810
   * Fixed possible buffer overflow with overlong PSK
811 812
   * Possible remotely-triggered out-of-bounds memory access fixed (found by
     TrustInSoft)
813

814 815 816
Bugfix
   * ecp_gen_keypair() does more tries to prevent failure because of
     statistics
817
   * Fixed bug in RSA PKCS#1 v1.5 "reversed" operations
818
   * Fixed testing with out-of-source builds using cmake
819
   * Fixed version-major intolerance in server
820
   * Fixed CMake symlinking on out-of-source builds
821
   * Fixed dependency issues in test suite
822
   * Programs rsa_sign_pss and rsa_verify_pss were not using PSS since 1.3.0
823 824
   * Bignum's MIPS-32 assembly was used on MIPS-64, causing chaos. (Found by
     Alex Wilson.)
825 826
   * ssl_cache was creating entries when max_entries=0 if TIMING_C was enabled.
   * m_sleep() was sleeping twice too long on most Unix platforms.
827
   * Fixed bug with session tickets and non-blocking I/O in the unlikely case
Paul Bakker's avatar
Paul Bakker committed
828
     send() would return an EAGAIN error when sending the ticket.
829
   * ssl_cache was leaking memory when reusing a timed out entry containing a
Paul Bakker's avatar
Paul Bakker committed
830
     client certificate.
831
   * ssl_srv was leaking memory when client presented a timed out ticket
Paul Bakker's avatar
Paul Bakker committed
832
     containing a client certificate
833 834
   * ssl_init() was leaving a dirty pointer in ssl_context if malloc of
     out_ctr failed
835 836
   * ssl_handshake_init() was leaving dirty pointers in subcontexts if malloc
     of one of them failed
837
   * Fix typo in rsa_copy() that impacted PKCS#1 v2 contexts
838
   * x509_get_current_time() uses localtime_r() to prevent thread issues
839

Paul Bakker's avatar
Paul Bakker committed
840
= PolarSSL 1.3.4 released on 2014-01-27
841
Features
842
   * Support for the Koblitz curves: secp192k1, secp224k1, secp256k1
Paul Bakker's avatar
Paul Bakker committed
843
   * Support for RIPEMD-160
Paul Bakker's avatar
Paul Bakker committed
844
   * Support for AES CFB8 mode
845
   * Support for deterministic ECDSA (RFC 6979)
846 847 848 849

Bugfix
   * Potential memory leak in bignum_selftest()
   * Replaced expired test certificate
850
   * ssl_mail_client now terminates lines with CRLF, instead of LF
851 852
   * net module handles timeouts on blocking sockets better (found by Tilman
     Sauerbeck)
853 854 855
   * Assembly format fixes in bn_mul.h

Security
856 857
   * Missing MPI_CHK calls added around unguarded mpi calls (found by
     TrustInSoft)
858

Paul Bakker's avatar
Paul Bakker committed
859
= PolarSSL 1.3.3 released on 2013-12-31
860 861
Features
   * EC key generation support in gen_key app
862 863
   * Support for adhering to client ciphersuite order preference
     (POLARSSL_SSL_SRV_RESPECT_CLIENT_PREFERENCE)
864
   * Support for Curve25519
865
   * Support for ECDH-RSA and ECDH-ECDSA key exchanges and ciphersuites
866
   * Support for IPv6 in the NET module
867
   * AES-NI support for AES, AES-GCM and AES key scheduling
868
   * SSL Pthread-based server example added (ssl_pthread_server)
869

870 871 872 873
Changes
   * gen_prime() speedup
   * Speedup of ECP multiplication operation
   * Relaxed some SHA2 ciphersuite's version requirements
874
   * Dropped use of readdir_r() instead of readdir() with threading support
875
   * More constant-time checks in the RSA module
876
   * Split off curves from ecp.c into ecp_curves.c
877
   * Curves are now stored fully in ROM
878
   * Memory usage optimizations in ECP module
879
   * Removed POLARSSL_THREADING_DUMMY
880

881
Bugfix
882
   * Fixed bug in mpi_set_bit() on platforms where t_uint is wider than int
883
   * Fixed X.509 hostname comparison (with non-regular characters)
884
   * SSL now gracefully handles missing RNG
885 886
   * Missing defines / cases for RSA_PSK key exchange
   * crypt_and_hash app checks MAC before final decryption
887
   * Potential memory leak in ssl_ticket_keys_init()
888
   * Memory leak in benchmark application
889
   * Fixed x509_crt_parse_path() bug on Windows platforms
890 891
   * Added missing MPI_CHK() around some statements in mpi_div_mpi() (found by
     TrustInSoft)
892 893
   * Fixed potential overflow in certificate size verification in
     ssl_write_certificate() (found by TrustInSoft)
894

895 896 897 898
Security
   * Possible remotely-triggered out-of-bounds memory access fixed (found by
     TrustInSoft)

Paul Bakker's avatar
Paul Bakker committed
899
= PolarSSL 1.3.2 released on 2013-11-04
900 901
Features
   * PK tests added to test framework
902
   * Added optional optimization for NIST MODP curves (POLARSSL_ECP_NIST_OPTIM)
903
   * Support for Camellia-GCM mode and ciphersuites
904

905 906
Changes
   * Padding checks in cipher layer are now constant-time
907
   * Value comparisons in SSL layer are now constant-time
908
   * Support for serialNumber, postalAddress and postalCode in X509 names
909
   * SSL Renegotiation was refactored
910

911
Bugfix
912
   * More stringent checks in cipher layer
913
   * Server does not send out extensions not advertised by client
914
   * Prevent possible alignment warnings on casting from char * to 'aligned *'
915
   * Misc fixes and additions to dependency checks
Paul Bakker's avatar
Paul Bakker committed
916
   * Const correctness
917
   * cert_write with selfsign should use issuer_name as subject_name
918
   * Fix ECDSA corner case: missing reduction mod N (found by DualTachyon)
919
   * Defines to handle UEFI environment under MSVC
920
   * Server-side initiated renegotiations send HelloRequest
921

Paul Bakker's avatar
Paul Bakker committed
922
= PolarSSL 1.3.1 released on 2013-10-15
923 924
Features
   * Support for Brainpool curves and TLS ciphersuites (RFC 7027)
925
   * Support for ECDHE-PSK key-exchange and ciphersuites
926
   * Support for RSA-PSK key-exchange and ciphersuites
927

928 929
Changes
   * RSA blinding locks for a smaller amount of time
930
   * TLS compression only allocates working buffer once
931
   * Introduced POLARSSL_HAVE_READDIR_R for systems without it
932
   * config.h is more script-friendly
933 934 935 936 937

Bugfix
   * Missing MSVC defines added
   * Compile errors with POLARSSL_RSA_NO_CRT
   * Header files with 'polarssl/'
938
   * Const correctness
939
   * Possible naming collision in dhm_context
Paul Bakker's avatar
Paul Bakker committed
940
   * Better support for MSVC
941
   * threading_set_alt() name
942
   * Added missing x509write_crt_set_version()
943

Paul Bakker's avatar
Paul Bakker committed
944
= PolarSSL 1.3.0 released on 2013-10-01
945 946 947 948 949
Features
   * Elliptic Curve Cryptography module added
   * Elliptic Curve Diffie Hellman module added
   * Ephemeral Elliptic Curve Diffie Hellman support for SSL/TLS
    (ECDHE-based ciphersuites)
950 951
   * Ephemeral Elliptic Curve Digital Signature Algorithm support for SSL/TLS
    (ECDSA-based ciphersuites)
952
   * Ability to specify allowed ciphersuites based on the protocol version.
953
   * PSK and DHE-PSK based ciphersuites added
954 955
   * Memory allocation abstraction layer added
   * Buffer-based memory allocator added (no malloc() / free() / HEAP usage)
956
   * Threading abstraction layer added (dummy / pthread / alternate)
Paul Bakker's avatar
Paul Bakker committed
957
   * Public Key abstraction layer added
958 959 960 961
   * Parsing Elliptic Curve keys
   * Parsing Elliptic Curve certificates
   * Support for max_fragment_length extension (RFC 6066)
   * Support for truncated_hmac extension (RFC 6066)
962 963
   * Support for zeros-and-length (ANSI X.923) padding, one-and-zeros
     (ISO/IEC 7816-4) padding and zero padding in the cipher layer
964
   * Support for session tickets (RFC 5077)
965 966
   * Certificate Request (CSR) generation with extensions (key_usage,
     ns_cert_type)
967 968
   * X509 Certificate writing with extensions (basic_constraints,
     issuer_key_identifier, etc)
969
   * Optional blinding for RSA, DHM and EC
970 971
   * Support for multiple active certificate / key pairs in SSL servers for
   	 the same host (Not to be confused with SNI!)
972

973
Changes
974 975
   * Ability to enable / disable SSL v3 / TLS 1.0 / TLS 1.1 / TLS 1.2
     individually
976 977
   * Introduced separate SSL Ciphersuites module that is based on
     Cipher and MD information
978 979
   * Internals for SSL module adapted to have separate IV pointer that is
     dynamically set (Better support for hardware acceleration)
980 981
   * Moved all OID functionality to a separate module. RSA function
     prototypes for the RSA sign and verify functions changed as a result
982
   * Split up the GCM module into a starts/update/finish cycle
983 984
   * Client and server now filter sent and accepted ciphersuites on minimum
     and maximum protocol version
985
   * Ability to disable server_name extension (RFC 6066)
986 987
   * Renamed error_strerror() to the less conflicting polarssl_strerror()
     (Ability to keep old as well with POLARSSL_ERROR_STRERROR_BC)
988
   * SHA2 renamed to SHA256, SHA4 renamed to SHA512 and functions accordingly
989
   * All RSA operations require a random generator for blinding purposes
990 991
   * X509 core refactored
   * x509_crt_verify() now case insensitive for cn (RFC 6125 6.4)
Paul Bakker's avatar
Paul Bakker committed
992
   * Also compiles / runs without time-based functions (!POLARSSL_HAVE_TIME)
993 994
   * Support faulty X509 v1 certificates with extensions
     (POLARSSL_X509_ALLOW_EXTENSIONS_NON_V3)
995

996
Bugfix
997
   * Fixed parse error in ssl_parse_certificate_request()
998
   * zlib compression/decompression skipped on empty blocks
999
   * Support for AIX header locations in net.c module
1000
   * Fixed file descriptor leaks
1001

1002 1003 1004 1005
Security
   * RSA blinding on CRT operations to counter timing attacks
     (found by Cyril Arnaud and Pierre-Alain Fouque)

1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066

= Version 1.2.14 released 2015-05-??

Security
   * Fix potential invalid memory read in the server, that allows a client to
     crash it remotely (found by Caj Larsson).
   * Fix potential invalid memory read in certificate parsing, that allows a
     client to crash the server remotely if client authentication is enabled
     (found using Codenomicon Defensics).
   * Add countermeasure against "Lucky 13 strikes back" cache-based attack,
     https://dl.acm.org/citation.cfm?id=2714625

Bugfix
   * Fix bug in Via Padlock support (found by Nikos Mavrogiannopoulos).
   * Fix hardclock() (only used in the benchmarking program) with some
     versions of mingw64 (found by kxjhlele).
   * Fix warnings from mingw64 in timing.c (found by kxjklele).
   * Fix potential unintended sign extension in asn1_get_len() on 64-bit
     platforms (found with Coverity Scan).

= Version 1.2.13 released 2015-02-16
Note: Although PolarSSL has been renamed to mbed TLS, no changes reflecting
      this will be made in the 1.2 branch at this point.

Security
   * Fix remotely-triggerable uninitialised pointer dereference caused by
     crafted X.509 certificate (TLS server is not affected if it doesn't ask
     for a client certificate) (found using Codenomicon Defensics).
   * Fix remotely-triggerable memory leak caused by crafted X.509 certificates
     (TLS server is not affected if it doesn't ask for a client certificate)
     (found using Codenomicon Defensics).
   * Fix potential stack overflow while parsing crafted X.509 certificates
     (TLS server is not affected if it doesn't ask for a client certificate)
     found using Codenomicon Defensics).
   * Fix buffer overread of size 1 when parsing crafted X.509 certificates
     (TLS server is not affected if it doesn't ask for a client certificate).

Bugfix
   * Fix potential undefined behaviour in Camellia.
   * Fix memory leaks in PKCS#5 and PKCS#12.
   * Stack buffer overflow if ctr_drbg_update() is called with too large
     add_len (found by Jean-Philippe Aumasson) (not triggerable remotely).
   * Fix bug in MPI/bignum on s390/s390x (reported by Dan Horák) (introduced
     in 1.2.12).
   * Fix unchecked return code in x509_crt_parse_path() on Windows (found by
     Peter Vaskovic).
   * Fix assembly selection for MIPS64 (thanks to James Cowgill).
   * ssl_get_verify_result() now works even if the handshake was aborted due
     to a failed verification (found by Fredrik Axelsson).
   * Skip writing and parsing signature_algorithm extension if none of the
     key exchanges enabled needs certificates. This fixes a possible interop
     issue with some servers when a zero-length extension was sent. (Reported
     by Peter Dettman.)
   * On a 0-length input, base64_encode() did not correctly set output length
     (found by Hendrik van den Boogaard).

Changes
   * Blind RSA private operations even when POLARSSL_RSA_NO_CRT is defined.
   * Forbid repeated extensions in X.509 certificates.
   * Add compile-time option POLARSSL_X509_MAX_INTERMEDIATE_CA to limit the
     length of an X.509 verification chain (default = 8).
1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093
= Version 1.2.12 released 2014-10-24

Security
   * Remotely-triggerable memory leak when parsing some X.509 certificates
     (server is not affected if it doesn't ask for a client certificate).
     (Found using Codenomicon Defensics.)

Bugfix
   * Fix potential bad read in parsing ServerHello (found by Adrien
     Vialletelle).
   * ssl_close_notify() could send more than one message in some circumstances
     with non-blocking I/O.
   * x509_crt_parse() did not increase total_failed on PEM error
   * Fix compiler warnings on iOS (found by Sander Niemeijer).
   * Don't print uninitialised buffer in ssl_mail_client (found by Marc Abel).
   * Fix net_accept() regarding non-blocking sockets (found by Luca Pesce).
   * ssl_read() could return non-application data records on server while
     renegotation was pending, and on client when a HelloRequest was received.
   * Fix warnings from Clang's scan-build (contributed by Alfred Klomp).

Changes
   * X.509 certificates with more than one AttributeTypeAndValue per
     RelativeDistinguishedName are not accepted any more.
   * ssl_read() now returns POLARSSL_ERR_NET_WANT_READ rather than
     POLARSSL_ERR_SSL_UNEXPECTED_MESSAGE on harmless alerts.
   * Accept spaces at end of line or end of buffer in base64_decode().

Paul Bakker's avatar
Paul Bakker committed
1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163
= Version 1.2.11 released 2014-07-11
Features
   * Entropy module now supports seed writing and reading

Changes
   * Introduced POLARSSL_HAVE_READDIR_R for systems without it
   * Improvements to the CMake build system, contributed by Julian Ospald.
   * Work around a bug of the version of Clang shipped by Apple with Mavericks
     that prevented bignum.c from compiling. (Reported by Rafael Baptista.)
   * Improvements to tests/Makefile, contributed by Oden Eriksson.
   * Use UTC time to check certificate validity.
   * Reject certificates with times not in UTC, per RFC 5280.
   * Migrate zeroizing of data to polarssl_zeroize() instead of memset()
     against unwanted compiler optimizations

Security
   * Forbid change of server certificate during renegotiation to prevent
     "triple handshake" attack when authentication mode is optional (the
     attack was already impossible when authentication is required).
   * Check notBefore timestamp of certificates and CRLs from the future.
   * Forbid sequence number wrapping
   * Prevent potential NULL pointer dereference in ssl_read_record() (found by
     TrustInSoft)
   * Fix length checking for AEAD ciphersuites (found by Codenomicon).
     It was possible to crash the server (and client) using crafted messages
     when a GCM suite was chosen.

Bugfix
   * Fixed X.509 hostname comparison (with non-regular characters)
   * SSL now gracefully handles missing RNG
   * crypt_and_hash app checks MAC before final decryption
   * Fixed x509_crt_parse_path() bug on Windows platforms
   * Added missing MPI_CHK() around some statements in mpi_div_mpi() (found by
     TrustInSoft)
   * Fixed potential overflow in certificate size verification in
     ssl_write_certificate() (found by TrustInSoft)
   * Fix ASM format in bn_mul.h
   * Potential memory leak in bignum_selftest()
   * Replaced expired test certificate
   * ssl_mail_client now terminates lines with CRLF, instead of LF
   * Fix bug in RSA PKCS#1 v1.5 "reversed" operations
   * Fixed testing with out-of-source builds using cmake
   * Fixed version-major intolerance in server
   * Fixed CMake symlinking on out-of-source builds
   * Bignum's MIPS-32 assembly was used on MIPS-64, causing chaos. (Found by
     Alex Wilson.)
   * ssl_init() was leaving a dirty pointer in ssl_context if malloc of
     out_ctr failed
   * ssl_handshake_init() was leaving dirty pointers in subcontexts if malloc
     of one of them failed
   * x509_get_current_time() uses localtime_r() to prevent thread issues
   * Some example server programs were not sending the close_notify alert.
   * Potential memory leak in mpi_exp_mod() when error occurs during
     calculation of RR.
   * Improve interoperability by not writing extension length in ClientHello
     when no extensions are present (found by Matthew Page)
   * rsa_check_pubkey() now allows an E up to N
   * On OpenBSD, use arc4random_buf() instead of rand() to prevent warnings
   * mpi_fill_random() was creating numbers larger than requested on
     big-endian platform when size was not an integer number of limbs
   * Fix detection of DragonflyBSD in net.c (found by Markus Pfeiffer)
   * Stricter check on SSL ClientHello internal sizes compared to actual packet
     size (found by TrustInSoft)
   * Fix preprocessor checks for bn_mul PPC asm (found by Barry K. Nathan).
   * Use \n\t rather than semicolons for bn_mul asm, since some assemblers
     interpret semicolons as comment delimiters (found by Barry K. Nathan).
   * Disable broken Sparc64 bn_mul assembly (found by Florian Obser).
   * Fix base64_decode() to return and check length correctly (in case of
     tight buffers)

Paul Bakker's avatar
Paul Bakker committed
1164 1165 1166 1167 1168 1169 1170 1171 1172
= Version 1.2.10 released 2013-10-07
Changes
   * Changed RSA blinding to a slower but thread-safe version

Bugfix
   * Fixed memory leak in RSA as a result of introduction of blinding
   * Fixed ssl_pkcs11_decrypt() prototype
   * Fixed MSVC project files

1173
= Version 1.2.9 released 2013-10-01
1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187
Changes
   * x509_verify() now case insensitive for cn (RFC 6125 6.4)

Bugfix
   * Fixed potential memory leak when failing to resume a session
   * Fixed potential file descriptor leaks (found by Remi Gacogne)
   * Minor fixes

Security
   * Fixed potential heap buffer overflow on large hostname setting
   * Fixed potential negative value misinterpretation in load_file()
   * RSA blinding on CRT operations to counter timing attacks
     (found by Cyril Arnaud and Pierre-Alain Fouque)

1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235
= Version 1.2.8 released 2013-06-19
Features
   * Parsing of PKCS#8 encrypted private key files
   * PKCS#12 PBE and derivation functions
   * Centralized module option values in config.h to allow user-defined
     settings without editing header files by using POLARSSL_CONFIG_OPTIONS

Changes
   * HAVEGE random generator disabled by default
   * Internally split up x509parse_key() into a (PEM) handler function
     and specific DER parser functions for the PKCS#1 and unencrypted
     PKCS#8 private key formats
   * Added mechanism to provide alternative implementations for all
     symmetric cipher and hash algorithms (e.g. POLARSSL_AES_ALT in
	 config.h)
   * PKCS#5 module added. Moved PBKDF2 functionality inside and deprecated
     old PBKDF2 module

Bugfix
   * Secure renegotiation extension should only be sent in case client
     supports secure renegotiation
   * Fixed offset for cert_type list in ssl_parse_certificate_request()
   * Fixed const correctness issues that have no impact on the ABI
   * x509parse_crt() now better handles PEM error situations
   * ssl_parse_certificate() now calls x509parse_crt_der() directly
     instead of the x509parse_crt() wrapper that can also parse PEM
	 certificates
   * x509parse_crtpath() is now reentrant and uses more portable stat()
   * Fixed bignum.c and bn_mul.h to support Thumb2 and LLVM compiler
   * Fixed values for 2-key Triple DES in cipher layer
   * ssl_write_certificate_request() can handle empty ca_chain

Security
   * A possible DoS during the SSL Handshake, due to faulty parsing of
     PEM-encoded certificates has been fixed (found by Jack Lloyd)

= Version 1.2.7 released 2013-04-13