Add skeleton for EC J-PAKE module

parent 14d80050
......@@ -88,6 +88,11 @@
#error "MBEDTLS_ECDSA_C defined, but not all prerequisites"
#endif
#if defined(MBEDTLS_ECJPAKE_C) && \
( !defined(MBEDTLS_ECP_C) || !defined(MBEDTLS_MD_C) )
#error "MBEDTLS_ECJPAKE_C defined, but not all prerequisites"
#endif
#if defined(MBEDTLS_ECDSA_DETERMINISTIC) && !defined(MBEDTLS_HMAC_DRBG_C)
#error "MBEDTLS_ECDSA_DETERMINISTIC defined, but not all prerequisites"
#endif
......
......@@ -1670,6 +1670,21 @@
*/
#define MBEDTLS_ECDSA_C
/**
* \def MBEDTLS_ECJPAKE_C
*
* Enable the elliptic curve J-PAKE library.
*
* Module: library/ecjpake.c
* Caller:
*
* This module is used by the following key exchanges:
* ECJPAKE
*
* Requires: MBEDTLS_ECP_C, MBEDTLS_MD_C
*/
#define MBEDTLS_ECJPAKE_C
/**
* \def MBEDTLS_ECP_C
*
......@@ -1678,6 +1693,7 @@
* Module: library/ecp.c
* Caller: library/ecdh.c
* library/ecdsa.c
* library/ecjpake.c
*
* Requires: MBEDTLS_BIGNUM_C and at least one MBEDTLS_ECP_DP_XXX_ENABLED
*/
......
/**
* \file ecjpake.h
*
* \brief Elliptic curve J-PAKE
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
#ifndef MBEDTLS_ECJPAKE_H
#define MBEDTLS_ECJPAKE_H
#include "ecp.h"
#include "md.h"
#ifdef __cplusplus
extern "C" {
#endif
#if defined(MBEDTLS_SELF_TEST)
/**
* \brief Checkup routine
*
* \return 0 if successful, or 1 if a test failed
*/
int mbedtls_ecjpake_self_test( int verbose );
#endif
#ifdef __cplusplus
}
#endif
#endif /* ecjpake.h */
......@@ -20,6 +20,7 @@ set(src_crypto
dhm.c
ecdh.c
ecdsa.c
ecjpake.c
ecp.c
ecp_curves.c
entropy.c
......
......@@ -49,7 +49,8 @@ OBJS_CRYPTO= aes.o aesni.o arc4.o \
bignum.o blowfish.o camellia.o \
ccm.o cipher.o cipher_wrap.o \
ctr_drbg.o des.o dhm.o \
ecdh.o ecdsa.o ecp.o \
ecdh.o ecdsa.o ecjpake.o \
ecp.o \
ecp_curves.o entropy.o entropy_poll.o \
error.o gcm.o havege.o \
hmac_drbg.o md.o md2.o \
......
/*
* Elliptic curve J-PAKE
*
* Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* This file is part of mbed TLS (https://tls.mbed.org)
*/
/*
* EC-JPAKE is defined in Chapter 7.4 of the Thread specification.
*/
#if !defined(MBEDTLS_CONFIG_FILE)
#include "mbedtls/config.h"
#else
#include MBEDTLS_CONFIG_FILE
#endif
#if defined(MBEDTLS_ECJPAKE_C)
#include "mbedtls/ecjpake.h"
#if defined(MBEDTLS_SELF_TEST)
#if defined(MBEDTLS_PLATFORM_C)
#include "mbedtls/platform.h"
#else
#include <stdio.h>
#define mbedtls_printf printf
#endif
/*
* Checkup routine
*/
int mbedtls_ecjpake_self_test( int verbose )
{
int ret;
ret = 0; /* XXX */
if( verbose != 0 )
mbedtls_printf( "\n" );
return( ret );
}
#endif /* MBEDTLS_SELF_TEST */
#endif /* MBEDTLS_ECJPAKE_C */
......@@ -462,6 +462,9 @@ static const char *features[] = {
#if defined(MBEDTLS_ECDSA_C)
"MBEDTLS_ECDSA_C",
#endif /* MBEDTLS_ECDSA_C */
#if defined(MBEDTLS_ECJPAKE_C)
"MBEDTLS_ECJPAKE_C",
#endif /* MBEDTLS_ECJPAKE_C */
#if defined(MBEDTLS_ECP_C)
"MBEDTLS_ECP_C",
#endif /* MBEDTLS_ECP_C */
......
......@@ -49,6 +49,7 @@
#include "mbedtls/xtea.h"
#include "mbedtls/pkcs5.h"
#include "mbedtls/ecp.h"
#include "mbedtls/ecjpake.h"
#include "mbedtls/timing.h"
#include <stdio.h>
......@@ -244,6 +245,11 @@ int main( int argc, char *argv[] )
return( ret );
#endif
#if defined(MBEDTLS_ECJPAKE_C)
if( ( ret = mbedtls_ecjpake_self_test( v ) ) != 0 )
return( ret );
#endif
#if defined(MBEDTLS_DHM_C)
if( ( ret = mbedtls_dhm_self_test( v ) ) != 0 )
return( ret );
......
......@@ -60,9 +60,10 @@ add_test_suite(ctr_drbg)
add_test_suite(debug)
add_test_suite(des)
add_test_suite(dhm)
add_test_suite(ecp)
add_test_suite(ecdh)
add_test_suite(ecdsa)
add_test_suite(ecjpake)
add_test_suite(ecp)
add_test_suite(entropy)
add_test_suite(error)
add_test_suite(gcm gcm.aes128_en)
......
......@@ -60,7 +60,7 @@ APPS = test_suite_aes.ecb$(EXEXT) test_suite_aes.cbc$(EXEXT) \
test_suite_ctr_drbg$(EXEXT) test_suite_debug$(EXEXT) \
test_suite_des$(EXEXT) test_suite_dhm$(EXEXT) \
test_suite_ecdh$(EXEXT) test_suite_ecdsa$(EXEXT) \
test_suite_ecp$(EXEXT) \
test_suite_ecjpake$(EXEXT) test_suite_ecp$(EXEXT) \
test_suite_error$(EXEXT) test_suite_entropy$(EXEXT) \
test_suite_gcm.aes128_de$(EXEXT) \
test_suite_gcm.aes192_de$(EXEXT) \
......@@ -292,6 +292,10 @@ test_suite_ecdsa$(EXEXT): test_suite_ecdsa.c $(DEP)
echo " CC $<"
$(CC) $(LOCAL_CFLAGS) $(CFLAGS) $< $(LOCAL_LDFLAGS) $(LDFLAGS) -o $@
test_suite_ecjpake$(EXEXT): test_suite_ecjpake.c $(DEP)
echo " CC $<"
$(CC) $(LOCAL_CFLAGS) $(CFLAGS) $< $(LOCAL_LDFLAGS) $(LDFLAGS) -o $@
test_suite_ecp$(EXEXT): test_suite_ecp.c $(DEP)
echo " CC $<"
$(CC) $(LOCAL_CFLAGS) $(CFLAGS) $< $(LOCAL_LDFLAGS) $(LDFLAGS) -o $@
......
ECJPAKE selftest
ecjpake_selftest:
/* BEGIN_HEADER */
#include "mbedtls/ecjpake.h"
/* END_HEADER */
/* BEGIN_DEPENDENCIES
* depends_on:MBEDTLS_ECJPAKE_C
* END_DEPENDENCIES
*/
/* BEGIN_CASE depends_on:MBEDTLS_SELF_TEST */
void ecjpake_selftest()
{
TEST_ASSERT( mbedtls_ecjpake_self_test( 0 ) == 0 );
}
/* END_CASE */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment