Removal of code relating to token partitioning

Change-Id: Iaf3c88d6758639a55bd92c3be5c51e6bed407a3c

Removal of error_resilient_mode features.
The interface has been left in place but does nothing.

Change-Id: I2407863bd0d3c98407354507423ca48d29f63b17

For now the interface elements have been left in place
to make sure existing parameter files work but parameters
relating to drop frame wont do anything.

Change-Id: I579ee614726387381c546845dac4bc03c74c6a07

Removal of code relating to spatial re sampling

Change-Id: Iff1bc651c62cd528f960c4b27f9673b172e68835

Change-Id: Ifdb17b56090a317b2aa82cf125d57934902c5298

Removed ~CONFIG_REALTIME_ONLY code.

Change-Id: I5fafff29a08acd8928699f9ddce8744787024d8c

Since this is the only ABI incompatible change since the last release,
convert it to use the control interface instead. The member of the
configuration struct is replaced with the VP8E_SET_MAX_INTRA_BITRATE_PCT
control.

More significant API changes were expected to be forthcoming when this
control was first introduced, and while they continue to be expected,
it's not worth breaking compatibility for only this change.

Change-Id: I799d8dbe24c8bc9c241e0b7743b2b64f81327d59

Removes mixed usage of (unsigned) long long and INT64.
Fixes Issue #208.

Change-Id: I220d3ed5ce4bb1280cd38bb3715f208ce23cf83a

Change-Id: Icb4e4f0d7c3074a8507852178be87541a1cb5bac

Allow the encoder to inform the application that the encoded frame will not
be used as a reference.

Change-Id: I90e41962325ef73d44da03327deb340d6f7f4860

With this commit frames can be received partition-by-partition
from the encoder and passed partition-by-partition to the
decoder.

At the encoder-side this makes it easier to split encoded
frames at partition boundaries, useful when packetizing
frames. When VPX_CODEC_USE_OUTPUT_PARTITION is enabled,
several VPX_CODEC_CX_FRAME_PKT packets will be returned
from vpx_codec_get_cx_data(), containing one partition
each. The partition_id (starting at 0) specifies the decoding
order of the partitions. All partitions but the last has
the VPX_FRAME_IS_FRAGMENT flag set.

At the decoder this opens up the possibility of decoding partition
N even though partition N-1 was lost (given that independent
partitioning has been enabled in the encoder) if more info
about the missing parts of the stream is available through
external signaling.

Each partition is passed to the decoder through the
vpx_codec_decode() function, with the data pointer pointing
to the start of the partition, and with data_sz equal to the
size of the partition. Missing partitions can be signaled to
the decoder by setting data != NULL and data_sz = 0. When
all partitions have been given to the decoder "end of data"
should be signaled by calling vpx_codec_decode() with
data = NULL and data_sz = 0.

The first partition is the first partition according to the
VP8 bitstream + the uncompressed data chunk + DCT address
offsets if multiple residual partitions are used.

Change-Id: I5bc0682b9e4112e0db77904755c694c3c7ac6e74

Adds a control to limit the maximum size of a keyframe, as a function of
the per-frame bitrate. See this thread[1] for more detailed discussion:

[1]: http://groups.google.com/a/webmproject.org/group/codec-devel/browse_thread/thread/271b944a5e47ca38

Change-Id: I7337707642eb8041d1e593efc2edfdf66db02a94

This patch changes the rc_undershoot_pct and rc_overshoot_pct controls
to set the "aggressiveness" of rate adaptation, by limiting the
amount of difference between the target buffer level and the actual
buffer level which is applied to the target frame rate for this frame.

This patch was initially provided by arosenberg at logitech.com as
an attachment to issue #270. It was modified to separate these controls
from the other unrelated modifications in that patch, as well as to
use the pre-existing variables rather than introducing new ones.

Change-Id: Id542e3f5667dd92d857d5eabf29878f2fd730a62

14 bits available in the bistream => valid range [1..16383]
Removed unused local vars.

Change-Id: Icf3385e47a9fa13af70053129c2248671f285583

Remove encoding speed limitation in real-time mode.

Change-Id: Ib5e35d8bb522b2a25f3e4ad5cfe2788ebebb3617

The firstpass motion map consists of an 8-bit flag for
each MB indicating how strongly the firstpass code
believes it should be filtered during the second pass
ARNR filtering.

For long or large format material the motion map can
become extremely large and hamper the operation of
the encoding process.

This change removes the motion map altogether, leaving
the second pass to rely on the magnitude of the motion
compensated error to determine the filter weight to
use for the MB during ARNR filtering.

Tests on the derf set indicate that the effect of this
change is neutral, with some small wins and losses. The
motion map has therefore been removed based on
a cost/benefit evaluation.

Change-Id: I53e07d236f5ce09a6f0c54e7c4ffbb490fb870f6

Change-Id: I0d0445c57eb0889082f83de1948852d57b38fefb

Allow compiling without adding vp8/{common,encoder,decoder} to the
include paths.

Change-Id: Ifeb5dac351cdfadcd659736f5158b315a0030b6c

preview_img d_w and d_h along with w and h
would not be updated for resized frames.

now uses sd.y_width and sd.y_height

Change-Id: I52241de4cc1de5e73f865e668bd70a7cbd954390

When the keyframe distance is fixed the first interval has the right
distance but, the next ones have kf_distance + 1.

Change-Id: I44f1190fe7146124bd07660a5e0ef08829e3ae07

min_q is required to be <= max_q.

Change-Id: I28eccf96df3b52a94913762b54c4fbe0d021ce5e

Remove allocation/deallocation of stats storage.
Remove full search functions in machine specific encoder inits.
Remove last pass validation in  validate_config.

Change-Id: I7f29be69273981a4fef6e80ecdb6217c68cbad4e

The CQ level was not using the q_trans[] array to convert
to a 0-127 range as per min and maxq

Experimental change to try and match the reconstruction
error for forced key frames approximately to that of the
previous frame by means of the recode loop. Though this
may cause extra recodes and the recode behavior has not
been optimized, it can only happen on forced key frames.

Change-Id: I1f7e42d526f1b1cb556dd461eff1a692bd1b5b2f

The merge includes hooks to for CQ mode and other code
changes merged from the test branch.

CQ mode attempts to maintain a more stable quantizer within a clip
whilst also trying to adhere to a guidline maximum bitrate.

The existing target data rate parameter is used to specify the
guideline maximum bitrate.

A new parameter allows the user to specify a target CQ level.

For normal (non kf/gf/arf) frames, the quantizer will not drop BELOW the
user specified value (0-63). However, in some cases the encoder may
choose to impose a target CQ that is above that specified by the user,
if it estimates that consistent use of the target value is not compatible
with guideline maximum bitrate.

Change-Id: I2221f9eecae8cc3c431d36caf83503941b25e4c1

Add a new encoder control, VP8E_SET_TUNING, to allow the application
to inform the encoder that the material will benefit from certain
tuning. Expose this control as the --tune option to vpxenc. The args
helper is expanded to support enumerated arguments by name or value.

Two tunings are provided by this patch, PSNR (default) and SSIM.
Activity masking is made dependent on setting --tune=ssim, as the
current implementation hurts speed (10%) and PSNR (2.7% avg,
10% peak) too much for it to be a default yet.

Change-Id: I110d969381c4805347ff5a0ffaf1a14ca1965257

remove warning comment in vpxenc.c: in case of 1x1 picture,
detect_bytes will be equal to '3' and we'll fall back to
RAW_TYPE.
fix read_frame() by tracking the pre-read buffer length
in the struct detect

Change-Id: If1ed86ee5260dcdbc8f9d10da6cbb84a4cc2f151

The ERROR macro collides wiith the MS SDK on Windows. Since we're not
making any win32 calls in this function, just #undef it first to take
ownership.

Change-Id: Ic18c60dfa3a33c52e6c49d3f4f8d3e7e3ac3341d

Debugging in postproc needs more flags to allow for specific
block types to be turned on or off in the visualizations.

Must be enabled with --enable-postproc-visualizer during
configuration time.

Change-Id: Ia74f357ddc3ad4fb8082afd3a64f62384e4fcb2d

Change the pts of the altref frame to be as close as possible to the
pts of the preceding frame and still be strictly increasing.

Change-Id: Iae3033a4c89ae5a9d0e5c4198e9196e5f3ee57c7

The first implementation of the firstpass motion map for motion
compensated temporal filtering created a file, fpmotionmap.stt,
in the current working directory. This was not safe for multiple
encoder instances. This patch merges this data into the first pass
stats packet interface, so that it is handled like the other
(numerical) firstpass stats.

The new stats packet is defined as follows:
    Numerical Stats (16 doubles) -- 128 bytes
    Motion Map                   -- 1 byte / Macroblock
    Padding                      -- to align packet to 8 bytes

The fpmotionmap.stt file can still be generated for debugging
purposes in the same way that the textual version of the stats
are available (defining OUTPUT_FPF in firstpass.c)

Change-Id: I083ffbfd95e7d6a42bb4039ba0e81f678c8183ca

Change-Id: I8eb49c56f7509f0a8074d440e8345b9e3344b85b

Modified the range checking of parameters used in the
AltRef temporal filter (arnr-max-frames, arnr-strength,
arnr-type) and default values for each of them.

Change-Id: Ib261028d501b9523f6e44cb4790cc52167b6e92b

Having these symbols be available as functions rather than data is
occasionally more convenient. Implemented this way rather than a
get-codec-by-id style to avoid creating a link-time dependency
between the encoder and the decoder.

Fixes issue #169

Change-Id: I319f281277033a5e7e3ee3b092b9a87cce2f463d

The patch related with issue #55 (5a72620d) fixed some warnings, but the
fix was not optimal. It actually was a trick to confuse compiler rather
than a fix.

This patch fixes it by creating a new macro used when needed just a high
limit check for an unsigned.

Change-Id: I94b322e0f7fb07604b3b1df1f9321185f48cfcb5

Changes 'The VP8 project' to 'The WebM project', for consistency
with other webmproject.org repositories.

Fixes issue #97.

Change-Id: I37c13ed5fbdb9d334ceef71c6350e9febed9bbba

Remove the dependency on postproc.c for the encoder in general, the only
unchecked need for it is when CONFIG_PSNR is enabled. All other cases
are already wrapped in CONFIG_POSTPROC. In the CONFIG_PSNR case the file
will still be included.

Additionally, when VP8_SET_POSTPROC is used with the encoder when post
processing has been disabled an error will be returned.

This addresses issue #153.

Change-Id: Ia6dfe20167f7077734a6058cbd1d794550346089

This is not the behavior that most users expect.

Change-Id: I226126ea400c22cf1f7918e80ea7fe0771c569cb

The external API exposes the RC initial/optimal/full buffer level in
milliseconds, but this value was truncated internally to seconds. This
patch allows the use of the full precision during the conversion from
time to bits.

Change-Id: If8dd2a87614c05747f81432cbe75dd9e6ed2f04e

Change maximum ARNR filter width to 15.

Change-Id: I3b72450ea08e96287445ec18810630ee2292954c

When the license headers were updated, they accidentally contained
trailing whitespace, so unfortunately we have to touch all the files
again.

Change-Id: I236c05fade06589e417179c0444cb39b09e4200d