This matches the behavior prior to generalizing the frame context
selection, and intuitively makes sense in that the first forward ref
is immediately after the keyframe, so it's quality is improved a bit
by using the keyframe's entropy context rather than the default.

Change-Id: Ia82cef79382b9d8cfafdc44ba0533d4dc3e44053

The loop filtering used for MB edge or internal edge of a MB using 8x8
tranform was reading 5 pixel each side and writting 3 pixel each side.
With suggestion from Aki and Scott on hardware&software performance,
this commit changed to read 4 pixel each side and write 3 pixel each
side.

Change-Id: I584393906c4f5f948a581d6590959522572743bb

This commit restores the quality lost when the buffer-to-buffer copy
logic was removed. Note that this is specific to the current use of
golden frames and will need rework when RTC functionality is added.

Change-Id: I7324a75acd96eafd9e0f9b8633d782e390d5dc21

Previously there were two frame coding contexts tracked, one for normal
frames and one for alt-ref frames. Generalize this by signalling the
context to use in the bitstream, rather than tieing it to the alt ref
refresh bit. Also increase the number of contexts available to 4, which
may be useful for temporal scalability.

Change-Id: I7b66daaddd55c535c20cd16713541fab182b1662

Remove lst_fb_idx, gld_fb_idx, alt_fb_idx, refresh_last_frame,
refresh_golden_frame, refresh_alt_ref_frame from common. Gold/Alt are
encode side conventions. From the decoder's perspective, we want to be
dealing with numbered references.

Updates to active_ref 2 signal mode context switches, vestigial from
refresh_alt_ref_frame. This needs some clean up to make sense with
increased numbers of reference frames, as well as reimplementing the
swapping of alt/golden which was previously done using the
buffer-to-buffer copy mechanism removed in an earlier commit.

Change-Id: I7334445158b7666f9295d2a2dd22aa03f4485f58

Do reference counting the same way on the encoder as the decoder does,
rather than maintaining the 'flags' member of YV12_BUFFER_CONFIG.

Change-Id: I91dc210ffca081acaf9d5c09a06e7461b3c3139c

This is the first in a series of commits to add additional reference
frames to the codec. Each frame will be able to update any of the
available references, but copying between references is not
supported.

Change-Id: I5945b5ce6cc3582c495102b4e7eed4f08c44d5a1

During master jenkins verification proces

Change-Id: I3722b8753eaf39f99b45979ce407a8ea0bea0b89

Uses a single 1D table to implement the weighting of the predictors
for the compound inter-intra experiment.

Change-Id: I204ffbe4f9fc79d5d43b6c724ad253d800461012

These variables have the type int64_t, not long long. long long could
be a larger type than 64 bits. Emulate INT64_MAX for older versions of
MSVC, and remove the unreferenced vpx_ports/vpxtypes.h

Change-Id: Ideaca71838fcd3849d816d5ab17aa347c97d03b0

This experiment gives little gains and adds relatively much code
complexity (and it hinders other experiments), so let's get rid of
it.

Change-Id: Id25e79a137a1b8a01138aa27a1fa0ba4a2df274a

Change-Id: Iac7f3d108863552b850c92c727e00c95571c9e96

Change-Id: I0c94475075e66e13cfe4c20fab7db6474441ae86

In commit 9a1d73d0, loop filtering was added for UV 4x4 boundaries
when TX_8X8 is used by a MB. This commit further refined the decision
to be based on the actual transform used for the UV planes. When
UV planes use 4x4 transform, i.e. when prediction mode used is either
I8X8_PRED or SPLITMV, UV planes are filtered on 4x4 boundaries, and no
filtering is applied on 4x4 block boundaries when UV planes use 8X8
transform.

Change-Id: Ibb404face0a1d129b4b4abaf67c55d82e8df8bec

Change-Id: Ibcc342efac0a9be7a21d9b2c09984d9e16bbb225

The warnings caused verify failure with gerrit for several  commits

Change-Id: I030df8638bd69b8783a3ac58e720ff9f0bfd546c

Removed the experimental flag from around the prediction filter.

Change-Id: Ic1dd2db8fe8ac17ed5129f83094d4c5cdd5527d2

This prevents ill-defined behaviour, such as setting x->skip for a mode
that is excluded because of frame-level flags (e.g. filter selection,
compound prediction selection), then not breaking out of the RD loop
because the mode is not allowed, but keeping the flag on. Whatever mode
is iterated through next in the RD loop will then carry this flag, and
all sort of bad stuff happens, such as x->skip being set on intra pred
modes.

Change-Id: I5bec46b36e38292174acb1c564b3caf00a9b4b9a

Previous commit does not build cleanly on Jenkins with the DWT/DCT
hybrid experiment enabled (--enable-dwtdcthybrid).

Change-Id: Ia67e8f59d17ef2d5200ec6b90dfe6711ed6835a5

Fixes some scaling issues. Adds an option to only compute the
dct on the low-low subband for 32x32 and 64x64 blocks using
only a single 16x16 dct after 1 and 2 wavelet decomposition
levels respectively. Also adds an option to use a 8x8 dct
as building block.

Currenlty with the 2/6 filter and with a single 16x16 dct on
the low low band, the reuslts compared to full 32x32 dct is
as follows:
derf: -0.15%
yt: -0.29%
std-hd: -0.18%
hd: -0.6%
These are my current recommended settings, since the 2/6 filter
is very simple.

Results with 8x8 dct are about 0.3% worse.

Change-Id: I00100cdc96e32deced591985785ef0d06f325e44

and vp9_mb_lpf_vertical_edge_w_sse2.  This was quickly done so we can
run some tests over the weekend.  Future commits will optimize/refactor these
functions further.

The decoder performance improved by ~17% for the clip used.

Change-Id: I612687cd5a7670ee840a0cbc3c68dc2b84d4af76

On block boundary within a MB when 8x8 block boundary only is filtered
for Y.

Change-Id: Ie1c804c877d199e78e2fecd8c2d3f1e114ce9ec1

See https://codereview.chromium.org/11875006/

Change-Id: Ied2a17df2b3222635f84aef120eaa9feb53750d2

Updated the rtcd_defs and used the sse2 uv version
of the loopfilter.  The performance improved by ~8%
for the test clip used.

Change-Id: I5a0bca3b6674198d40ca4a77b8cc722ddde79c36

Replace INT64_MAX references with LLONG_MAX
for windows build.

Change-Id: Ib8b45c1e9c15c043b2f54c27ed83b8682b2be34f

Change-Id: I8826bcdcf72ba6d86bde31cd13902a710399805c

The commit changed to not to use wider lpf within a superblock when
32x32 transform is used for the block.

The commit also changed to use the shorter version of loop filtering:
for UV planes.

Change-Id: I344c1fb9a3be9d1200782a788bcb0b001fedcff8

Change-Id: I615651e4c7b09e576a341ad425cf80c393637833

Change-Id: If6c88752dffdb566f8d4322f135145270716fb8e

when larger transforms are used

Change-Id: I25251442b44bf251df4c25a1c1fcf71fb2ad913b

This patch removes the old pred-filter experiment and replaces it
with one that is implemented using the switchable filter framework.

If the pred-filter experiment is enabled, three interopolation
filters are tested during mode selection; the standard 8-tap
interpolation filter, a sharp 8-tap filter and a (new) 8-tap
smoothing filter.

The 6-tap filter code has been preserved for now and if the
enable-6tap experiment is enabled (in addition to the pred-filter
experiment) the original 6-tap filter replaces the new 8-tap smooth
filter in the switchable mode.

The new experiment applies the prediction filter in cases of a
fractional-pel motion vector. Future patches will apply the filter
where the mv is pel-aligned and also to intra predicted blocks.

Change-Id: I08e8cba978f2bbf3019f8413f376b8e2cd85eba4

This is to add to the 64x64 transform experiment as an alternative to
a 64x64 DCT.
Two levels of wavelet decomposition is used on a 64x64 block, followed
by 16x16 DCT on the four lowest subbands. The highest three subbands
are left untransformed after the first level DWT.

Change-Id: I3d48d5800468d655191933894df6b46e15adca56

Change-Id: I0df99742029834a85c4933652b0587cf5b6b2587

About 5% decoder speedup.

Change-Id: Ib6687d337af758a536a0e7e289f400990f1f9794

This is to fix a decoder crash when decoder skips a number of frame to
continue decoding from a later key frame.

Change-Id: I3ba116eba6c3440e0528a21f53745f694302e4ad

This commit did a couple of minor cleanup/refactoring to prepare for
futher loop filter experiments. It merged y_only version of loop filter
function into the regular one, which makes sure that same logic is used
for functions for picking level and for actual loop filtering.

Change-Id: Id10c94dccd45f58e5310bacfdf6ee63cbb60b86f

Also reindent a block of code that was misindented after addition of
the tx32x32 experiment.

Change-Id: Ic3e4aae3effd8a40136da68c9f382af03632ba08

Change-Id: Ibd7380f478d3127f9db91d0a4fd2fd0dfde961ab

Change-Id: Ib674e0153ca360867ab7a20ba291ac9171a01250

3.2% gains on std/hd, 1.0% gains on hd.

Change-Id: I481d5df23d8a4fc650a5bcba956554490b2bd200