This patch replaces the old Qt logo with the new, flatter one.

The PNGs were optimized via: optipng  -o7 -strip "all"

Task-number: QTBUG-41685
Change-Id: I51983a45144373bf7aee31a32990ecbb2582f488
Reviewed-by: Robert Loehning <robert.loehning@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>

The two-pass feature depends on the QRC_DATA signature that needs
to be stored in the array later overwritten by the embedded data.

Task-number: QTBUG-42359
Change-Id: Ida1ccff40dda28f92a4267f86f48ee96d62bd214
Reviewed-by: aavit <eirik.aavitsland@theqtcompany.com>

This is for completeness, since we've done the same for Q_CC_GNU and
Q_CC_CLANG. We won't really use the macros like this because both
__INTEL_COMPILER and _MSC_VER are readily usable.

Change-Id: I669c60166fa4839d43f84f339e6896321d62817f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>

The sequence of (__GNUC__ * 100 + __GNUC_MINOR__) was used in quite a
few places. Simplify it to make the code more readable.

This follows the change done for Clang, which was quite necessary since
Apple's version of Clang has different build numbers.

Change-Id: I886271a5a5f21ae59485ecf8d140527723345a46
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>

We map the Apple Clang versions to upstream, so that we have one
define to compare against.

Fixes build break on iOS due to qbasicatomic.h not defining
QT_BASIC_ATOMIC_HAS_CONSTRUCTORS on Apple Clang versions, which
is needed after 1e9db9f5



Change-Id: I17493c0187c20abc5d22e71944d62bfd16afbad2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>

When the QWidgetWindow receives a resize or move event, it should check
with the widget if its crect already has this geometry. if not then send
the resize or move event

Ideally events should be sent whenever the QWidgetWindow receives them.
QTBUG-42383 is created for this problem

Task-number: QTBUG-29937
Task-number: QTBUG-38768
Task-number: QTBUG-30744
Change-Id: I1e9a5d25de29a98885edece927ba14d7a763eb01
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>

This avoids the creation of demos-manifest.xml if there
are no demos in the repo.

Change-Id: I4d3bbe4540f4b1532c0d51f62b8d1494864a7b1c
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>

This makes is possible to generate a valid D-Bus XML from a class that has
e.g.  internal slots with pointer parameters by explicitly marking all D-Bus
exports with Q_SCRIPTABLE and running qdbuscpp2xml with the '-a' switch.

Change-Id: Iab32a0a7f46f2516f6385808bbf35b26c7708b1a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>

The latter name was used by Apple in their internal AArch64 LLVM backend,
but has since been merged into LLVM upstream and renamed to AArch64.

https://github.com/llvm-mirror/llvm/commit/29f94c72014eaa5d0d3b920686e68



Change-Id: I319f42f07c95dfbcd121134fbe6e554e2d36453d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>

Do not clear the QLibrarySettings configuration information already
in ~QCoreApplication (via qAddPostRoutine). This fixes issues where
multiple QCoreApplication objects are created over time (in plugins).

Task-number: QTBUG-34290
Change-Id: Ib5c58f825619ede484492e057e08d73b2b4c6101
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>

Fixes case if custom icon size is given and height is more than width.
Check of minimum valid height was compared wrongly to width and caused invalid
vertical alignment. After fix vertical alignment is correct aligned to vertical
center with the tab text.

Change-Id: I6c4a710b15e91225edeabb629bfea7049ab2f42a
Task-number: QTBUG-42143
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Reviewed-by: Jens Bache-Wiig <jensbw@gmail.com>

Task-number: QTBUG-40120
Change-Id: I949f19ced4eefcf7a40e64ad63e316765c6f2f48
Reviewed-by: J-P Nurmi <jpnurmi@theqtcompany.com>

The private was not deleted. Adding the dtor in turn
causes a warning about not having a virtual dtor
in the base class, so add that as well.

Change-Id: I24a90caf2cf6192a6f17cf5af96b8f77010d9127
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>

This key combination should open the context menu.

Task-number: QTBUG-40085
Change-Id: I7cfc89f766b3734b9fb9d3c9135b4896ffbadb5b
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>

Two fromstrerror_helper overloads are defined, to manage the fact that
strerror_r returns an int or a char* depending on the system. The problem
is that then only one overload used (again, depending on the actual
stderror_r return type), leading to one of the two overload to be unused
and thus triggering the unused function warning.

kernel/qsystemerror.cpp:64:27: error: unused function 'fromstrerror_helper' [-Werror,-Wunused-function]
    static inline QString fromstrerror_helper(int, const QByteArray &buf)

Change-Id: I6a1c8e1a4b7d14068b682db26002ff68ad36167c
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>

The result of pressing the key is still a Qt::Key_Return press/release
sequence, which needs to be handled manually.

Change-Id: I72c7b0067bd3ec1bc315ab2c84361800b7be0943
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Marius Bugge Monsen <marius@cutehacks.com>

The technique of sending an action does not always end up at the actual
first responder, but it will end up in a responder in the responder
chain of the first responder, so we continue searching the subviews
recursively until we find the real first-responder.

Change-Id: I6abc9bc18eb127fa4b317cd308783c0ecfcd670a
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>

Instead of faking it, by returning YES for isFirstResponder, which caused
issues when iOS would try to dismiss the keyboard by resigning the true
first-responder.

Change-Id: I816c4cf9c699d72995ce7968e1f1a4aa9c9c167e
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>

In the non-native QFileDialog, a QSplitter separates the two central
views (the list view of "places" and the tree view for navigating
the file system).

Unfortunately, that splitter allows sections to be collapsed,
resulting in a weird status where the user doesn't
understand what has just happened and thinks that (s)he may have
broken something. Worse, that gets actually saved into the
application settings, so the splitter may stay collapsed forever.

Instead, let's simply prevent sections from being collapsible.

Task-number: QTBUG-19467
Change-Id: I11ff7c55a5535680a3edce5f4e70c9338291b94f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>

The old designer generator inserted stray spaces etc.;
save it again with the new designer to fix those.

Change-Id: I3890dd942970d9da71582ccb70b75d59888304bf
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>

1. Add comment about the magic TYPE_NUMBER_VARIATION_PASSWORD value.
2. ImhHiddenText, ImhNoPredictiveText and ImhSensitiveData should all
   disable suggestions.
3. Only ImhSensitiveData sets TYPE_TEXT_VARIATION_VISIBLE_PASSWORD
4. Don't OR date and time to get DateTime...

Task-number: QTBUG-38080
Change-Id: If456563983130e9af409ffa8cb717ddf259f1d6b
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>

The JNI environment should be managed by QJNIEnvironmentPrivate
directly or through QJNIObjectPrivate. There is also a clear
difference between calls coming from or going into Java code.
Calls coming from Java already comes with the 'right' environment and
in most cases no extra considerations or set-up is needed.

Change-Id: I92d935ddfb70332041869185d5a92438930ff9b9
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>

This is one of several fixes where the goal is to simplify the jni code
by letting QJNI manage the environment.

Change-Id: Ia714e25fbb3fcd170150392e822b0a3fc3812818
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>

Let the QJNI classes manager the jni environment and caching of jni
handles.

Change-Id: I8c238375026adf449d6e6e2b521caa6cd63a0fb4
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>

Enables QRunnables to be run on the UI thread. For now this function
is only intended for internal consumption.

Change-Id: I5e2abb06104219a9dd55b3308113056e4da5fa07
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>

The assembly code doesn't build on that architecture yet:

    qimage_neon.cpp:78:17: error: vector register expected
                "vld3.8     { d0, d1, d2 }, [%[SRC]] !\n\t"
                ^
    <inline asm>:1:15: note: instantiated into assembly here
        vld3.8     { d0, d1, d2 }, [x1] !
                     ^
    qimage_neon.cpp:78:57: error: unrecognized instruction mnemonic
                "vld3.8     { d0, d1, d2 }, [%[SRC]] !\n\t"
                                                        ^
    <inline asm>:2:2: note: instantiated into assembly here
        vswp d0, d2
        ^
    qimage_neon.cpp:79:31: error: vector register expected
                "vswp d0, d2\n\t"
                              ^
    <inline asm>:3:15: note: instantiated into assembly here
        vst4.8     { d0, d1, d2, d3 }, [x8,:64] !
                     ^

Change-Id: I8fe93b3940d971c0aed5973fe6e1a5e2f362df3c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>

Task-number: QTBUG-39027
Change-Id: Icb5998a4e28edbc6952bc79d970c5ce6dbe57d69
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>

Task-number: QTBUG-40362
Change-Id: If89a8ae6aeecd4060a34f987baaf55c12439e7ea
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>

Add platform backend for QWinRTWindow::setWindowTitle.

Task-number: QTBUG-40736
Change-Id: I0b03c9b5977368b38ba63044b00178c3f2bb0b86
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>

Gtk library usually takes care of this when the main
Gtk loop ends, but since Gtk's main even loop is not
used in QGtk2Dialog we have to store clipboard's content
with help of gtk_clipboard_store(). This function
sends a SAVE_TARGETS request to X11 clipboard manager
to save clipboards contents as required by ICCCM.

Task-number: QTBUG-34475
Change-Id: If784c425ea4a36ec1c3a8ddc0cdec080f57681a5
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>

qglobal.h:979:34: warning: unused variable 'q' [-Wunused-variable]                                 ^
kernel\qprintengine_win.cpp:719:5: note: in expansion of macro 'Q_Q'

Change-Id: I7fbad6c8341a3df1a06d3914209dec22876a2f09
Reviewed-by: Andy Shaw <andy.shaw@digia.com>

qglxintegration.h:78:17: error: private field 'm_screen' is not used [-Werror,-Wunused-private-field]

Change-Id: I7ffeda1dd4be962a4bfb43ebd3aa1dbd969a9837
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>

Note that at one point we need to use Cocoa to render the combo box, but
only if we're dealing with Qt Quick controls.

Also worth noticing, there's currently a bug in Cocoa when rendering
inactive combob boxes. We faithfully reproduce it in Qt for now. We'll
fix it when Apple does.

Finally, we need to start constraininig the combo boxes height. Cocoa
has not supported variable height combo boxes for years, and will even
spit the following warning if we try to do something smart.

   This application is trying to draw a very large combo box, 28 points
   tall.  Vertically resizable combo boxes are not supported, but it
   happens that 10.4 and previous drew something that looked kind of sort
   of okay.  The art in 10.5 does not break up in a way that supports that
   drawing.  This application should be revised to stop using large combo
   boxes.  This warning will appear once per app launch.

Task-number: QTBUG-40833
Task-number: QTBUG-42067
Change-Id: I6512a6a581d446a28585db22fe4dbeac09499321
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>

Defaulting to absolute_library_soname on configure -rpath is no longer
necessary as now we support @rpath install name ids on OS X and iOS.

This also sets QMAKE_SONAME_PREFIX to @rpath for Qt modules when built with
rpath configuration.

This makes Qt libraries relocatable on OS X. Qt SDK is not yet relocatable
though, because plugin location (including cocoa plugin) is still resolved
using absolute path (see QTBUG-14150), also there are several absolute paths
hardcoded in qmake mkspecs pri files.

Task-number: QTBUG-31814
Change-Id: Ie9dffefcd2a946c1580293d433621c1adb7e06c4
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>

This is triggered only when app is using Qt and Qt was built with "rpath"
configuration and project does not specify QMAKE_RPATHDIR explicitly.

Added rpath is made relative to app binary location if target path lies inside
Qt SDK, so all SDK bundled tools and examples will work automatically without
any changes. Tests are an exception here, since they are being run from their
build location by CI, we may not use relative rpath that work only in install
location.

Task-number: QTBUG-31814
Change-Id: I3690f29d2b5396a19c1dbc92ad05e6c028f8515b
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>

Q_ASSERT expands to nothing in release => mode unused.

Change-Id: Ieb9ec4382e925250e1146239ce061763003ff6ba
Reviewed-by: BogDan Vatra <bogdan@kde.org>

This was observed in the weather app, where sometimes we could not find
an items window. This could only be observed in the search results of
the cities. (while VKB was visible).

The old code traversed up to the QQuickListView and then it could not
traversed further up in the parent hierarchy. Because of this it
could also not find the associated window handle.
The reason for this is unknown, but maybe it could be related to the
fact that QQuickListView is a Component.

Regardless of this, invalidate the cache should invalidate everything.
We also traverse through all top level windows, but on iOS there should
not be too many top level windows...

Change-Id: I56a496435bb529a53d5ece8446cd2eeff502af84
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>

It's fixed for the Intel Composer XE 2015 (compiler version 15.0).

Change-Id: I7960b2128743081e905d4b96acf55360f744fc69
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>

I don't know why it was an #if 0. The __has_feature has been there for a
while. But, just to be sure, we check the presence of the header too.

Change-Id: I36e34c9e8fd4ce55c98966d2fad246b77eb16597
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>

The libc++ header does this:

 #if !__has_feature(cxx_atomic)
 #error <atomic> is not implemented

So we can't enable the feature until the compiler reports true for that
test.

Change-Id: I96f1c7eea8b93d93bd721fe5a85fa987339d091f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>