Change-Id: I580d2170f76a501dd95c8377d3f480b65a983d53
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>

No other Qt module has a README.md, therefore anything put here
has a high risk of going stale. Rather use the official documentation
for license information.

Task-number: QTBUG-64135
Change-Id: I0b233ee9f648f514cedf3ea0b152518fff915d16
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>

Sending an empty “Server” header during handshake
will make Safari error out with

    “WebSocket connection [...] failed: Invalid UTF-8
    sequence in header value”

This is an open bug in WebKit:
https://bugs.webkit.org/show_bug.cgi?id=139298



As far as I see, “Server” is not a required handshake
header as specified in RFC 6455 section 4.2.2 (5),
and we can omit it if the server name is not set.

Change-Id: Icec142f867813c16e3e3baa1378582164242e049
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>

 Conflicts:
	.qmake.conf

Change-Id: I249953f4865302c9fb8d3d9ae4aabb7e60c31a60

Change-Id: I5fcffa595a653f2cdb22cf45c96f31f958808633

Change-Id: I721b5481e2b4d8fb5c7bf84e2cfafd30b52a963e
Reviewed-by: Andy Shaw <andy.shaw@qt.io>

Change-Id: I4e7cb42c4188528fcf57af4971a018f7e0d7347a

 Conflicts:
	.qmake.conf

Change-Id: Ic66a4cabbe0a2af1fa59ae33026a236437434a85

 Conflicts:
	.qmake.conf

Change-Id: I4a88ddf6722f4b29512fbec71f3d055591e625ba

Change-Id: I394635e8722f98fb57b305e26264047feafc3b4f

File to test binary compatibility for 5.10 added

Change-Id: Iade26098325ba00e45cc055c9ebf8ff8fe2cd67b
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>

Change-Id: Ic6f8ac83bd779f4ba0576c9f849f9d7afa77a412
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>

Change-Id: I4e8cb48a3626209222ddada7a7560150f6382074

Change-Id: Ide48dd1b6e21a6441473c7e408c7cf5513fd30db

Change-Id: I1b001ff2a374ec53a9247adc2d91db12ef2a8923

It makes sense to first start listening (server.listen = true) and then
connect (socket.active = true).

Task-number: QTBUG-59388
Change-Id: I4235dad87ee3a62ebf75cec39e5d9fa4b7ed7552
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>

All this home-grown parsing should be replaced with code from the qhttp*
classes. This would result in a big refactoring though, so this commit
at least tries to make the header parsing RFC compliant and not choke
on perfectly legal "Header:Value" messages.

Change-Id: I14303610dc7187b8d8595568fb221c18e4e0d515
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>

Change-Id: Iea2ec6f528dfcbbedabfc6cac01293ace2d26835

Change-Id: I3ac04c00c6da760a0125970c55866055709a3371

 Conflicts:
	src/websockets/qwebsocket_p.cpp
	tests/auto/websockets/qwebsocketserver/tst_qwebsocketserver.cpp

Change-Id: I40922fab198a09a3fbba1b2f11b42f2d40e53720

Change-Id: Ie9ff1794bd623c46ae895d75a6016cd56dec9576
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>

Change-Id: I84dc0e201d92f1ad86565155e25f28a9ef5c5a9b
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>

Change-Id: I69f37f9304f24709a823fffd14e676c097712329
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>

Change-Id: I509332fa23bcf2cf2e6c10b7edacb4157f025ff9
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>

Change-Id: I59bcb929a37096e7c5a14d4003f26267bd0d752a
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>

Change-Id: I3ae5df71f201cfdb9a4c9e7d90a60d1f9792700a

If QWebSocket fires signal sslErrors the
QSslConfiguration of QWebSocket is not updated.
So client application cannot check it in
implemented slot.

Fix this by calling the update method like
for encrypted signal.

Sibling of QTBUG-40401.

Change-Id: I18b39f6b6a0791ae67fc2bff5cf2c04a22b0ab85
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>

Looks like QVERIFY(spy.wait()) is a little bit flaky. We should
check the count of the spy if it was successful instead of the
return value of wait since wait will return false even if the signal
was delivered before the call to wait().

Change-Id: I5f9031685dfa69b00155fa22602bab998843cb68
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>

In the rare case where the handshake was received before the signal and
slot was connected it would never invoke handshakeReceived and the
server would keep waiting.

Task-number: QTBUG-64026
Change-Id: I86d54031d2583b6a0cf2b5348889b5ef859b9aab
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>

Task-number: QTBUG-63707
Change-Id: Iaba78256f790bc422790a03fccb841e6e6482fc1
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>

Change-Id: Ic41f3745e800ba54153b36f269017075297c2402
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>

 Conflicts:
	examples/websockets/simplechat/chatserver.cpp

Change-Id: I98697cef4c05516b5b4122ad81c084546d57115f

 Conflicts:
	.qmake.conf

Change-Id: I4af142703e469b56236b73335a93f6960534c0f1

Found by clazy and fixes "clazy-strict-iterators" warning.

Change-Id: I8f50c92ac054d627499440d593faa43ed5b4ad4b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>

Change-Id: Ie16c88fb0a215efe5f152ea2d12c984f8d9e0878
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>

Change-Id: Ic1f4b357138457eb33ac9154a280f499664c3c78
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>

Change-Id: Ic2a08fd6c43078bf571e37234a52234827537394

- Replace Q_* macros with their 'modern' substitutes
- Replace a usage of qDebug with QTextStream
- Print a little piece of text whenever a client connects
- Add a textbox to the html page to set the host to connect to
- Enable/disable disconnect and send button based on connection

Task-number: QTBUG-60656
Change-Id: Ieec571c3964f94cd464912054acda3208c02c898
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>

Change-Id: Ic2c1569e84296a4cc2c64e5861fac0a7e4176887
Reviewed-by: Liang Qi <liang.qi@qt.io>

Change-Id: I0988a4119b5bd790d286c16b5647d97d4d95aef0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>