The skip flag is never set by the encoder for SPLITMV.

Change-Id: I5ae6457edb3a1193cb5b05a6d61772c13b1dc506

decoding

before
10.425
10.432
10.423
=10.426

after:
10.405
10.416
10.398
=10.406, 0.2% faster

encoding

before
14.252
14.331
14.250
14.223
14.241
14.220
14.221
=14.248

after
14.095
14.090
14.085
14.095
14.064
14.081
14.089
=14.086, 1.1% faster

Change-Id: I483d3d8f0deda8ad434cea76e16028380722aee2

The end-of-buffer check is hoisted out of the inner loop. Gives
about 0.5% improvement on x86_64.

Change-Id: I8e3ed08af7d33468c5c749af36c2dfa19677f971

Allow more reliable detection of truncated bitstreams by being more
precise with the count of "virtual" bits in the value buffer.
Specifically, the VP8_LOTS_OF_BITS value is accumulated into count,
rather than being assigned, which was losing the prior value,
increasing the required tolerance when testing for the error condition.

Change-Id: Ib5172eaa57323b939c439fff8a8ab5fa38da9b69

Combine calc_iframe_target_size, previously only used for forced
keyframes, with calc_auto_iframe_target_size, which handled most
keyframes.

Change-Id: I227051361cf46727caa5cd2b155752d2c9789364

This is a first step in cleaning up the redundancies between
vp8_calc_{auto_,}iframe_target_size. The pick_frame_size() function is
moved to ratectrl.c, and made to be the primary interface. This means
that the various calc_*_target_size functions can be made private.

Change-Id: I66a9a62a5f9c23c818015e03f92f3757bf3bb5c8

Fixed test vector mismatch that was introduced
in the "Removed dc_diff from MB_MODE_INFO"
(Ie2b9cdf9e0f4e8b932bbd36e0878c05bffd28931)

Change-Id: I98fa509b418e757b5cdc4baa71202f4168dc14ec

the decision to run the regular or simple loopfilter is made outside the
function and managed with pointers

stop tracking the option in two places. use filter_type exclusively

Change-Id: I39d7b5d1352885efc632c0a94aaf56b72cc2fe15

Likely introduced by a bad automatic merge from gerrit.

Change-Id: I0c6dd6ec18809cf9492f524d283fa4a3a8f4088b

Remove estimate_min_frame_size() and calc_low_ss_err(), as they are
never referenced.

Change-Id: I3293363c14ef70b79c4678ca27aa65b345077726

Rather than using a default size of 1/2 or 3/2 seconds for the first
frame, use a fraction of the initial buffer level to give the
application some control.

This will likely undergo further refinement as size limits on key
frames are currently under discussion on codec-devel@, but this gives
much better behavior for small buffer sizes as a starting point.

Change-Id: Ieba55b86517b81e51e6f0a9fe27aabba295acab0

Adds a control to limit the maximum size of a keyframe, as a function of
the per-frame bitrate. See this thread[1] for more detailed discussion:

[1]: http://groups.google.com/a/webmproject.org/group/codec-devel/browse_thread/thread/271b944a5e47ca38

Change-Id: I7337707642eb8041d1e593efc2edfdf66db02a94

vp8_adjust_key_frame_context() divides by
estimate_keyframe_frequency() which can
return 0 in the case where --kf-max-dist=0.

Change-Id: Idfc59653478a0073187cd2aa420e98a321103daa

The accumulator array is an integer array, so use paddd instead of paddw
to add values to it. Fixes overflows when using large --arnr-maxframes
(>8) values.

Change-Id: Iad83794caa02400a65f3ab5760f2517e082d66ae

The arguments to these fprintfs are int not long int so
the format specifier should be "%d" and not "%ld". This
was writing garbage in the linux build.

Change-Id: I3d2aa8a448d52e6dc08858d825bf394929b47cf3

add an sse4 quantizer so we can use pinsrw/pextrw and keep values in xmm
registers instead of proxying through the stack. and as long as we're
bumping up, use some ssse3 instructions in the EOB detection (see ssse3
fast quantizer)
pick up about a percent on 32bit and about two on 64bit.

Change-Id: If15abba0e8b037a1d231c0edf33501545c9d9363

ref_frame is set to INTRA_FRAME for keyframes.  The B_PRED
mode is only used in intra frames.

Change-Id: I9bac8bec7c736300d47994f3cb570329edf11ec0

The dc_diff flag is used to skip loopfiltering.  Instead
of setting this flag in the decoder/encoder, we now check
for this condition in the loopfilter.

Change-Id: Ie2b9cdf9e0f4e8b932bbd36e0878c05bffd28931

force_no_skip is always set to zero.

Change-Id: I89b61c5e0bee34627a9c07c05f3517e1db76af77

Code cleanup.  The build inter predictor functions are
redundantly checking the mode_info_context for either
INTRA_FRAME or SPLITMV.

Change-Id: I4d58c3a5192a4c2cec5c24ab1caf608bf13aebfb

Remove tot_key_frame_bits and prior_key_frame_size[] as they were
tracked but never used. Remove intra_frame_target, as it was only
used to initialize prior_key_frame_size.

Refactor vp8_adjust_key_frame_context() some to remove unnecessary
calculations.

Change-Id: Icbc2c83d2b90e184be03e6f9679e678f3a4bce8f

the win64 abi requires saving and restoring xmm6:xmm15. currently
SAVE_XMM and RESTORE XMM only allow for saving xmm6:xmm7. allow
specifying the highest register used and if the stack is unaligned.

Change-Id: Ica5699622ffe3346d3a486f48eef0206c51cf867

Went through the code and fixed it. Verified on Windows.

Where possible, remove dependencies on xmm[67]

Current code relies on pushing rbp to the stack to get 16 byte
alignment. This broke when rbp wasn't pushed
(vp8/encoder/x86/sad_sse3.asm). Work around this by using unaligned
memory accesses. Revisit this and the offsets in
vp8/encoder/x86/sad_sse3.asm in another change to SAVE_XMM.

Change-Id: I5f940994d3ebfd977c3d68446cef20fd78b07877

Passed SSE from sub-pixel search back to pick_inter_mode
function, which is compared with the encode_breakout to
see if we could skip evaluating the remaining modes.

Change-Id: I4a86442834f0d1b880a19e21ea52d17d505f941d

Change-Id: I209803b9dbed2b2f6d02258fd7a3963a6645f4ab

This is reported by m...@hesotech.de (see issue 312):
"The decoder causes an access violation
when you decode the first frame, then make a pause of about
60 seconds and then decode further frames. But only if
vpx_codec_dec_cfg_t.threads> 1.

This is caused by a timeout of WaitForSingleObject.
When I change the definition of VPXINFINITE to INFINITE(0xFFFFFFFF),
the problem is solved."

Reproduced the crash and verified the changes on Windows platform.
This brings the behavior inline with the other platforms using sem_wait().

Change-Id: I27b32f90bce05846ef2684b50f7a88f292299da1

source files are not executable

Change-Id: Id2c7294695a22217468426423979f68f02d82340

vp8_filter_block1d16_h4_ssse3 was never called

because UNSHADOW_ARGS moves the stack by 'mov rsp, rbp', the issue was
masked. however, if/when win64 used those registers for persistant data,
issues could/will arise.

Change-Id: I56d6effca0aeba1f86082689771cb10145d39651

Should only copy h lines, not h+1.

Change-Id: I802a85686635900459c6dc79596189033e5298d8

In vp8_pick_inter_mode(), for NEWMV mode, use the error result got
from motion search as distortion. This helps performance in real-
time mode.

Change-Id: I398c4e46cc5381f7d874e748cf78827ef0e0860c

The value of distortion2 returned by vp8_pick_intra4x4mby_modes
was being overwritten by the value returned by get16x16prederror
before it was tested.

Change-Id: If00e80332b272c5545c3a7e381c8041e8319b41a

opsnr.stt file was using \t for delimiters on everything
except between VPXSSIM and Time.

Change-Id: I6284c4e40c05ff642bf4b0170dca062c279a42df

Index i is used to detect early breakout from the first loop, but
its value is lost due to reuse in the second for loop. I moved
the position of the second loop and did some format cleanup.

Change-Id: I02780eae1bd89df4b6c000fb8a018b0837aac2e5

This patch cleans up the source buffer storage and copy mechanism to
allow access through a standard push/pop/peek interface. This approach
also avoids an extra copy in the case where the source is not a
multiple of 16, fixing issue #102.

Change-Id: I05808c39f5743625cb4c7af54cc841b9b10fdbd9

in encodframe.c, quant_shift is set to 0 or 1 in vp8cx_invert_quant

only use 8 bits to store this, instead of 16. will allow saving an
xmm register in an updated version of the regular quantize

Change-Id: Ie88c47fe2aff5af0283dab1147fb2791e4b12f90

This patch changes the rc_undershoot_pct and rc_overshoot_pct controls
to set the "aggressiveness" of rate adaptation, by limiting the
amount of difference between the target buffer level and the actual
buffer level which is applied to the target frame rate for this frame.

This patch was initially provided by arosenberg at logitech.com as
an attachment to issue #270. It was modified to separate these controls
from the other unrelated modifications in that patch, as well as to
use the pre-existing variables rather than introducing new ones.

Change-Id: Id542e3f5667dd92d857d5eabf29878f2fd730a62

Previous to commit de4e9e3b, there was an early return in the alt-ref
case that was inadvertantly removed when the function was refactored
to return void. This patch restores the prior behavior.

Change-Id: I783ffd594a4690297e2742f99526fd7ad67698b2

14 bits available in the bistream => valid range [1..16383]
Removed unused local vars.

Change-Id: Icf3385e47a9fa13af70053129c2248671f285583

Remove encoding speed limitation in real-time mode.

Change-Id: Ib5e35d8bb522b2a25f3e4ad5cfe2788ebebb3617

Clean up the code.

Change-Id: I7db048efa4d972b528d553a7921bc45979621129