Change-Id: I87d571008c73f0a8514e0a864405aadb82fd1bc0

Change-Id: I6a28cc87af275fc267b3cc8d90d642dcc870c249

Change-Id: Ie33f7d0f90d0e5862be975d676a700d06f79eec6

Change-Id: Ibb51f3f8c3575d4621890220b20887a13a46a04e

Change-Id: I2823043634b0fa617c2715d63ff18595b7209287

Refactor per-transform copy & paste into a common function
update_coef_probs_common() and read_coef_probs_common(). The dry-run and
bit-writing loops in the encoder are still obvious candidates to be made
common, but they start to diverge a bit in the next commit, so are left
as-is for now.

Change-Id: I896bd3f4a073a6296eab7e92463fef79d8c6c08c

Change-Id: I240d6b50069fd3f35cc4fed2f4507796f0ef25e9

There is a macro DEFAULT_INTERP_FILTER defined in encoder/onyx_if.c that
is set as EIGHTTAP for now - so SWITCHABLE is not really used. Ideally,
this should be SWITCHABLE but that would make the encoder quite a bit slower.
We will change the default filter to SWITCHABLE once we find a faster way to
search for switchable filters.

Change-Id: Iee91832cdc07e6e14108d9b543130fdd12fc9874

Change-Id: I0d306b0062be59bc785b65882691c956c8b5e7c8

Removes the old mv encoding code.

Change-Id: I1026d48cc5ac15ccb776f98463e929254c3dc7da

Change-Id: Ibc4425bb6e01606751021e57c93106c365a2da21

Change-Id: I5bca7b7a4b230082d36ac6fb84db84137ad177d7

Change-Id: I99f1982b30a630a9a070a8326d83b34a33cba14c

Change-Id: I02e7f64a7c99f6c222b9ef21341b0e801d646810

For splitmv, where partitioning is 8x16, 16x8 or 8x8, this patch
uses the 8x8 transform (instead of the 4x4) if txfm_mode is
ALLOW_8X8 or ALLOW_16X16. For TX_MODE_SELECT, splitmv can indicate
which of the 2 transform sizes (4x4 or 8x8) it wants to use.

Gains (with hybridtx4x4/8x8/16x16 and tx_select experiments
enabled) on derf: +0.9%, HD: +0.4%, STD/HD: +0.8% (SSIM or overall
PSNR, both metrics show similar improvements).

Change-Id: Ide954b000b415548ed92a7ac78e24f36e60fcf06

This can be used to distinguish between 16x8, 8x16, 8x8 and 4x4
partitioning modes when choosing splitmv as a MB mode.

Change-Id: Idc8b59772e1a80ccc4ad44d63c5c2ec3fc061a3c

It currently counts the probability that the branch is true, but it
should count the probability that the branch is false.

Change-Id: I963825da2e7a7ed3a613eb23ffd085e427dc36e5

Change-Id: Idd2722a538423b451e1e3495f89a7141480493d6

Allows B_VL_PRED & B_LD_PRED modes to be used for all blocks
within a MB in B_PRED mode. These modes were temporarily
disabled with super-block coding.

Change-Id: I973b9bdb82c3da5f12d7cc963162a28805f25303

Change-Id: Ica58d0c7d8addb5ddd5d6e1fdea8f0f96e110862

There were several different methods for calculating bitstream
probabilities in use. Consolodate these into a pair of functions,
get_prob() and get_binary_prob().

Change-Id: I5534f517f74027fee16d89c9baefaafea8156b2f

Pass the bool coder to be used explicitly. This avoids cases where two
different bool coders can be addressed from the same function. Also be
more consistent with bool coder variable naming, start to standardize
on 'bc'.

Change-Id: I1c95e2fdbe24ebe8c0f84924daa1728e3b054a31

Separates the logic on transform type selection previously spread out
over a number of files into a separate function. Currently the tx_type
field in b_mode_info is not used, but still left in there to eventually
use for signaling the transform type in the bitstream.

Also, now for tx_type = DCT_DCT, the regular integer DCT is used, as
opposed to the floating point DCT used in conjuction with hybrid
transform.

Results change somewhat due to the transform change, but are within
reasonable limits. The hd/std-hd sets are slightly up, while derf/yt
are slightly down.

Change-Id: I5776840c2239ca2da31ca6cfd7fd1148dc5f9e0f

Change-Id: If9fc2df4051ccfb8d804dae9d1be08d12d0f81ce

Change-Id: Ib42a5dbded27abf2a01fd656a47a1e96b1fe2912

Change-Id: Id8a7265dc721e5cdcaa144e0041beeb32a98f51c

remove useless space after address-of operator.

Change-Id: I1fb9e82e8d6cf87558fbd454fb5c0f87599ca2ab

This commit moves a bit of data that ended up packed with the
modes/mv/residual partition during the change to interleaved encoding
into partition 0 where it belongs.

Change-Id: Ic711a378c58d9d6a17254384f492c213a15bad92

Change-Id: Ic975ab85a9924adc7b3d421f64155cc79f40ffd0

Packs the bitstream with each mb's residual following its mode/mv
information.

TODO: There are still a few fields that should be packed into partition
0 but are included in partition 1, due to them being serialized from
write_kfmodes/pack_inter_mode_mvs, which execute after the first
partition is finalized. These need to be separated out into a separate
function, similar to mb_mode_mv_init() in decodemv.c.

Change-Id: I43a46c363601ab36954d07ebe498760e1e2e3af4

Change-Id: I76095d5a02edcc5d404ea830157780b24fd509d7

Change-Id: I0681d3183f51627be8c2bb76f343b7270f9116d8

This reinstates reverted commit 2113a831

Change-Id: I9a9af13497d1e58d4f467e3e083fddf06b1b786c

It is essentially a duplicate of mode for RD-only purposes. Removing it
saves us 4 bytes per B_MODE_INFO, or ~0.5MB for a 1080p video encode.

Change-Id: I0a54db5f51658b3946d7efb1ca6e8cfbda0cdf88

The variable is essentially a duplicate of mode for RD-only purposes.
Removing it gives identical results, and saves 4 bytes per macroblock
(i.e. 32.5kB for a 1080p HD video encode).

Change-Id: I22d5058fdb80ab0b69862caee825e9d86bb148b3

Change-Id: Ieb38c7aae91dbaca4a8add204fa84e1cfc459933

This way a caller doesn't need to implement the logic for which (and how
many) tokens to write out to stuff one macroblock worth of EOBs. Make
the actual function implementations static, since they are now only used
in tokenize.c; also do some minor stylistic changes so it follows the
style guide a little more closely; use PLANE_TYPE where appropriate,
remove old (stale) frame_type function arguments; hardcode plane type
where only a single one is possible (2nd order DC or U/V EOB stuffing);
support stuffing 8x8/4x4 transform EOBs with no 2nd order DC.

Change-Id: Ia448e251d19a4e3182eddeb9edd034bd7dc16fa3

Change the macros PLANE_TYPE_{Y_NO_DC,Y2,UV,Y_WITH_DC} to a typed enum,
and use this typed enum consistently across all places where relevant.
In places where the type is implied (e.g. in functions that only handle
second order planes or chroma planes), remove it as a function argument
and instead hardcode the proper enum in the code directly.

Change-Id: I93652b4a36aa43163d49c732b0bf5c4442738c47

Also merge the three occurrences of 4x4 chroma block writing into a
single function, and call that function instead of duplicating the
4x4 chroma tokenization code in 3 places.

Change-Id: I7913538d1029f709b0e3ae49fff1148d3be9eeb9

Merge code blocks for different transform sizes; use MACROBLOCKD as a
temp variable where that leads to smaller overall source code; remove
duplicate code under #if CONFIG_HYBRIDTRANSFORM/#else blocks. Some style
changes to make it follow the style guide a little better.

Change-Id: I1870a06dae298243db46e14c6729c96c66196525