Block type was already detected by is_inter_block() call.

Change-Id: I7923ce11b6a0071ce9df8c744a78c816651a15dc

Change-Id: I71d85e3455545960938e525ae8aa0a667e1db94c

Fixes a build issue when internal stats is enabled

Change-Id: I822cc60274e34b5f29ccbaa1f986fb9da6a8de4b

Change-Id: Ifdd951f24932839f06d1c700371662511dde6ebe

Fixes an assert that crashed for 360p..

Change-Id: I2faf15c93cbdb0e62a27a3b663f0d09ba62774a8

This commit added a logic to prevent the inter_filter type from being
changed if the default interp_filter mode is not switchable. Also, it
sets the default interp_filter to BILINEAR at very and super fast rtc
encoding modes

Change-Id: Ic41e6d31de29795a4ce536ec79afb01cab6daad3

--rt --cpu-used=-5 uses the progressive rtc mode
--rt --cpu-used=-6 uses the new super fast rtc mode

Change-Id: Id6469ca996100cdf794a0e42d76430161f22f976

use mode instead

Change-Id: I419d7a2dc4b0714ca6ff723c5e824521c150c460

So x86_64-win64-vs11 can build successfully.

Change-Id: If354c2ea3921fac8c9b413ed39223e70bc20c535

Change-Id: Iea7c9fa0726dbf9792eea79e6a05eb8a3c718d45

In this new mode, the size range is strictly determined by the min
and max partition size in neighborhood blocks.

Niklas720 encoding time at cpu-used -5 goes from 56250ms to 50676ms,
a 10% reduction.

Change-Id: I316b0e2ac967ff3fad57b28d69c0ec80b7d8b34e

Change-Id: I27a30b43eae026a77f92958e2238d02d9cdf7832

Change-Id: I101017621003314f000a454725ea13fc9db43177

Change-Id: If446225afbb49f6033c2a4516a37c377de6f70f7

This patch only works if the video is a width and height that are both
a multiple of 32..   It sets every partition to 16x16, and does INTRADC
only on the first frame and ZEROMV on every other frame.   It always does
does the largest possible transform, and loop filter level is set to 4.

Was ~20% faster than speed -5 of vp8

Now 20% slower but adds motion search ( every block ), nearest, near
and zeromv

The SVC test was changed because - while this realtime mode produces
bad quality albeit quickly, it isn't obeying all the rules it should
about which frames are available.

Change-Id: I235c0b22573957986d41497dfb84568ec1dec8c7

Trap divide by 0 that could occur with a 0 rate target
in aq mode COMPLEXITY_AQ.

Change-Id: I034514f512b2a0db470ae8d37ea395278bf473cf

Change-Id: I8d17867a4772554cbba2bd113cc5b4c99d50146d

Corresponding renames:
  subpel_kernel              => interp_kernel
  vp9_get_filter_kernel()    => vp9_get_interp_kernel()
  pred_filter_type           => pred_interp_filter
  adaptive_pred_filter_type  => adaptive_pred_interp_filter
  mcomp_filter_type          => interp_filter
  read_interp_filter_type()  => read_interp_filter()
  write_interp_filter_type() => write_interp_filter()
  fix_mcomp_filter_type()    => fix_interp_filter()

Change-Id: I1fa61fa1dc81ebbf043457c3ee2d8d4515bee6d3

Reading second motion vector only when it has a second ref_frame

Change-Id: Ica72c1cd955832e15ceccda5e5a17b0bfcd83044

This commit deprecates the use of best_mv from encoding and bit-stream
writing stages. It hence removes the definition from MACROBLOCKD.

Change-Id: I8e5302775a2aa4a18900726df407bff881f2dfb1

Keep naming consistency for RD and non-RD mode decision functions,
respectively.

Change-Id: I904282b675fc511a46c13cb1f8287aa5d1c8ac94

This commit setups a test framework for real-time coding. It enables
a light motion search for non-RD mode decision purpose.

Change-Id: I8bec656331539e963c2b685a70e43e0ae32a6e9d

Calculate the skip_coeff as part of the encode process, rather than
checking the eobs after the fact with another pass.

Change-Id: Ib41b139e96a97dee30e4b993b4cc53d86337128d

Change-Id: Iac5c5aeaef62a4095a60d91285d2c7ad717db0fb

Change-Id: I6d9f595249dc71752abe16c042d3b07aa2e4248d

This commit allows encoder to compare the SAD cost associated with
the best motion vector predictor, per frame. If one reference frame
has this cost more than 4 times of the best SAD cost given by other
reference frames, skip NEARESTMV, NEARMV, ZEROMV mode check of this
reference frame.

This setting is turned on in speed 2 and above. Compression quality
change in speed 2:
derf  -0.014%
yt    -0.097%
hd    -0.023%
stdhd  0.046%

It reduces the speed 2 runtime of test sequences:
pedestrian_area_1080p 4000 kbps 310763 ms -> 303595 ms
bluesky_1080p 6000 kbps         259852 ms -> 251920 ms

Change-Id: I7f59cf79503d51836d61d56d50dc5bdf0e502e22

Change-Id: I0c42a729038d0f4cb7bc07f587d066fcb1dfe9d9

Change-Id: I064ba32d5358bfbf080a4300fc1793b345080006

Encapsulating direct references to lst_fb_idx, gld_fb_idx, alt_fb_idx.

Change-Id: I7e65ba3f131286e433e6651970c5647311fa4687

Adding RefBuffer to simplify reference buffer management. The struct has a
pointer to image data and scale factors relative to the current frame.

Change-Id: If38eb1491ff687cc11428aee339f3e052e2c5d9e

Change-Id: I1d50f8701d9c9dedb84387a773a3e9b4daaad720

Change-Id: If04b57828847cee09a79c94e1098d1aa4990ea0d

Change-Id: Ic0345622115941f49b6a568c7b8154ba892cbf0d

Moving all code from that files to vp9_mvref_common.{h, c}.

Change-Id: Ibc4afcb8cea6847166ff411130e93611ebe63b20

Moving back to scale_factors struct. We don't need anymore x_offset_q4 and
y_offset_q4 because both values are calculated locally inside vp9_scale_mv
function.

Change-Id: I78a2122ba253c428a14558bda0e78ece738d2b5b

Change-Id: I82ecbe7fe0baa890ce251043f3c7159188c00665

Change-Id: Iba91ff1e797a83517e2cd7c3ab86cba39f39415b

Replacing: intra_inter_count, y_mode_count, y_uv_mode_count.

Change-Id: I5d70f73288af6effe6176e26400138067a2ae2a3

Change-Id: Ia356178d6a3c40b512d3123390781ef94dec72d6

Change-Id: I6ab9fe2326ebbadf0dd10cca9f66cf8277e3f43b
Replacing: comp_inter_count, single_ref_count, comp_ref_count.