The fast quantizer assembly code has not been updated to match the new
exact quantizer, which was made the default in commit 6adbe090.
Specifically, they are not aware of the potential for the coefficient
to be scaled, which results in the quantized result exceeding the range
of the DCT. This patch restores the previous behavior of using the
non-shifted coefficients when in the fast quantizer code path, but
unfortunately requires rebuilding the tables when switching between the
two.

Change-Id: I0a33f5b3850335011a06906f49fafed54dda9546

Small changes to the default zero bin and rounding tables.
Though the tables are currently the same for the Y1 and Y2 cases
I have left them as separate tables in case we want to tune this later.

There is now some adjustment of the zbin based on the prediction mode.
Previously this was restricted to an adjustment for gf/arf 0,0 MV.

The exact quantizer now marginal outperforms and is the default.

The overall average gain is about 0.5%

Change-Id: I5e4353f3d5326dde4e86823684b236a1e9ea7f47

Most of the code that actually uses these matrices indexes them as
 if they were a single contiguous array, and coverity produces
 reports about the resulting accesses that overflow the static
 bounds of the first row.
This is perfectly legal in C, but converting them to actual [16]
 arrays should eliminate the report, and removes a good deal of
 extraneous indexing and address operators from the code.

Change-Id: Ibda479e2232b3e51f9edf3b355b8640520fdbf23

This patch moves the scattered updates to the mb skip state
(mode_info_context->mbmi.mb_skip_coeff) to vp8_tokenize_mb. Recent
changes to the quantizer exposed a bug where if a macroblock
could be coded as a skip but isn't, the encoder would run the
loopfilter but the decoder wouldn't, causing a reference buffer
mismatch.

The loopfilter is controlled by a flag called dc_diff. The decoder
looks at the number of decoded coefficients when setting this flag.
The encoder sets this flag based on the skip state, since any
skippable macroblock should be transmitted as a skip. The coefficient
optimization pass (vp8_optimize_b()) could change the coefficients
such that a block that was not a skip becomes one. The encoder was
not updating the skip state in this situation for intra coded blocks.

The underlying issue predates it, but this bug was recently triggered
by enabling trellis quantization on the Y2 block in commit dcd29e36,
and by changing the quantizer range control in commit 305be4e4.

Change-Id: I5cce5da0dbc2d22f7d79ee48149f01e868a64802

This uses MB variance to change the RDO weight for mode decision
 and quantization.
Activity is normalized against the average for the frame, which is
 currently tracked using feed-forward statistics.
This could also be used to adjust the quantizer for the entire
 frame, but that requires more extensive rate control changes.
This does not yet attempt to adapt the quantizer within the frame,
 but the signaling cost means that will likely only be useful at
 very high rates.

Change-Id: I26cd7c755cac3ff33cfe0688b1da50b2b87b9c93

Moved the bounds computation on vertical MV component out
of the loop that processes MBs within a MB row.

Modified AltRef temporal filter to adapt filter length based
on macroblock coding modes selected during first-pass
encode.

Also added sub-pixel motion compensation to the AltRef
filter.

Changes 'The VP8 project' to 'The WebM project', for consistency
with other webmproject.org repositories.

Fixes issue #97.

Change-Id: I37c13ed5fbdb9d334ceef71c6350e9febed9bbba

Moved partition_bmi and partition_count out of MB_MODE_INFO and
placed into MACROBLOCK.  Also reduced the size of other members
of the MB_MODE_INFO struct.  For 1080p, the memory was reduced
by 1,209,516 bytes.  The decoder performance appeared to improve
by 3% for the clip used.
Note:  The main goal for this change is to improve the decoder
performance.  The encoder will be revisited at a later date for
further structure cleanup.

Change-Id: I4733621292ee9cc3fffa4046cb3fd4d99bd14613

Change-Id: I8b9fdf9875a8fcff4cb49a3357ce44f18108c2e7

This allows experiments of using different rounding and
zerobin constants for 2nd order blocks.

Change-Id: Idd829adba3edd1f713c66151a8d29bb245e33a71

The main reason for the change was to reduce cycles in the token
decoder. (~1.5% gain for 32 bit)  This layout should be more
cache friendly.

As a result of this change, the encoder had to be updated.

Change-Id: Id5e804169d8889da0378b3a519ac04dabd28c837
Note: dixie uses a similar layout

vp8_update_gf_useage_maps() is only used by the encoder. This patch
fixes the ability to build in decode-only or encode-only
configurations.

Change-Id: I3a5211428e539886ba998e09e8abd747ac55c9aa

These copies occurred for each macroblock in the encoder and decoder.
Thetemp MB_MODE_INFO mbmi was removed from MACROBLOCKD.  As a result,
a large number compile errors had to be fixed.

Change-Id: I4cf0ffae3ce244f6db04a4c217d52dd256382cf3

The gf_active code is only used by the encoder, so it was moved from
common and decoder.

Change-Id: Iada15acd5b2b33ff70c34668ca87d4cfd0d05025

This patch changes a few numbers in the two constant arrays
for quantizer's zerobin and rounding factors, in general to
make the sum of the two factors for any Q to be 128.  While
it might be beneficial to calibrate the two arrays for best
quantizer performance, it is not the purpose of this patch.
Normalizing the two arrays will enable quick optimization
of the current faster quantizer, i.e .zerobin check can be
removed.

Change-Id: If9abfd7929bf4b8e9ecd64a79d817c6728c820bd

To facilitate more testing related to quantizer and rate
control, the old version quantizer is added back. old and
new quantizer can be switched back and forth by define or
un-define the macro "EXACT_QUANT".

Change-Id: Ia77e687622421550f10e9d65a9884128a79a65ff

At the end of the decode, frame buffers were being copied.
The frames are not updated after the copy, they are just
for reference on later frames.  This change allows multiple
references to the same frame buffer instead of copying it.

Changes needed to be made to the encoder to handle this.  The
encoder is still doing frame buffer copies in similar places
where pointer reference could be done.

Change-Id: I7c38be4d23979cc49b5f17241ca3a78703803e66

This replaces the approximate division-by-multiplication in the
 quantizer with an exact one that costs just one add and one
 shift extra.
The asm versions have not been updated in this patch, and thus
 have been disabled, since the new method requires different
 multipliers which are not compatible with the old method.

Change-Id: I53ac887af0f969d906e464c88b1f4be69c6b1206

When the license headers were updated, they accidentally contained
trailing whitespace, so unfortunately we have to touch all the files
again.

Change-Id: I236c05fade06589e417179c0444cb39b09e4200d

Change-Id: Ieebea089095d9073b3a94932791099f614ce120c