uninitialized xd->mode_info_context would crash
vpxenc for --error-resilient=1.

Change-Id: I31849e40281e3d65ab63257cfec5e93398997f0b

Activity update is no longer dependent on being in RD mode, so update
it unconditionally.

Change-Id: Ib617a6fc210dfc045455e3e4467d7ee5e3d1fa0e

In activity masking, RDO constant RDMULT is adjusted on a per MB basis
adaptive to activity with the MB. errorperbit, which is defined as
RDMULT/RDDIV, is a constant used in motion estimation. Previously, in
activity masking, errorperbit is not changed even when RDMULT is changed.
This commit changed to adjust errorperbit according to the change in
RDMULT.

Test in cif set showed a very small but consistent gain by all quality
metrics (average, overall psnr and ssim) when activity masking is on.

Change-Id: I07ded3e852919ab76757691939fe435328273823

This change is analogous to I0b67dae1f8a74902378da7bdf565e39ab832dda7,
which made the move for the non-RD path.

Change-Id: If63fc1b0cd1eb7f932e710f83ff24d91454f8ed1

This commit moves the intra block mode selection from encodeframe.c
to pickinter.c (in the non-RD case). This allowed pick_intra_mbuv_mode
and pick_intra4x4mby_modes to be made static, and is a step towards
refactoring intra mode selection in the main pickinter loop. Gave a
small perf increase (~0.5%).

Change-Id: I0b67dae1f8a74902378da7bdf565e39ab832dda7

Some further re-structuring of activity masking code.
Still has various experimental switches.
Supports a metric based on intra encode.
Experimental comparison against a fixed activity target  rather
than a frame average, for altering rd and zbin.

Overall the SSIM performance is similar  to TT's original
code but there is a much smaller PSNR hit of circa
0.5% instead of 3.2%

Change-Id: I0fd53b2dfb60620b3f74d7415e0b81c1ac58c39a

The encoder defined about 4 set of similar functions to calculate sum,
variance or sse or a combination of them. This commit removed one set
of these functions, get8x8var and get16x16var, where calls to the later
function are replaced with var16x16 by using the fact on a 16x16 MB:
    variance == sse - sum*sum/256

Change-Id: I803eabd1fb3ab177780a40338cbd596dffaed267

Declared the bmi in BLOCKD as a union instead of B_MODE_INFO.
Then removed B_MODE_INFO completely.

Change-Id: Ieb7469899e265892c66f7aeac87b7f2bf38e7a67

vp8_fast_quantize_b_pair_neon function added to quantize
two adjacent blocks at the same time to improve performance.
 - Additional 3-6% speedup compared to neon optimized fast
   quantizer (Tanya VGA@30fps, 1Mbps stream, cpu-used=-5..-16)

Change-Id: I3fcbf141e5d05e9118c38ca37310458afbabaa4e

Minor modification.

Change-Id: I09511d38fd1451d5c4106a48acdb3f766ce59cb7

Declared the bmi in MODE_INFO as a union instead of B_MODE_INFO.
This reduced the memory footprint by 518,400 bytes for 1080
resolutions.  The decoder performance improved by ~4% for the
clip used and the encoder showed very small improvements. (0.5%)
This reduction was first mentioned to me by John K. and in a
later discussion by Yaowu.
This is WIP.

Change-Id: I8e175fdbc46d28c35277302a04bee4540efc8d29

Various members that were either completely unreferenced or written
and not read.

Change-Id: Ie41ebac0ff0364a76f287586e4fe09a68907806e

These don't need extern linkage.

Change-Id: I21220ada926380a75ff654f24df84376ccc49323

Group related functions together.

Change-Id: I92fd779225b75a7204650f1decb713142c655d71

Moved MVcount modification in pick_inter_mode, and eliminated
calling of vp8_find_near_mvs.

Change-Id: Icd47448a1dfc8fdf526f86757d0e5a7f218cb5e8

This commit restructures the mb activity masking code
to better facilitate experimentation using different metrics
etc. and also allows for adjustment of the zero bin either
for encode only or both the encode and mode selection
stages

It also uses information from the current frame rather than
the previous frame and the default strength has been
reduced.

Change-Id: Id39b19eace37574dc429f25aae810c203709629b

The compiler produces better assembly when using int_mv
for assignments.  The compiler shifts and ors the two 16bit
values when assigning MV.

Change-Id: I52ce4bc2bfbfaf3f1151204b2f21e1e0654f960f

Paul pointed out that the pointer to the gf_active_flags is not being
properly incremented in multithreaded encoder. This commit fixes the
issue by making sure the gf_active_ptr points to the starting of next
group of mb rows.

Change-Id: I3246e657d23beabb614dfb880733a68a5fd7e34c

Code cleanup.

Change-Id: Ic8b0167851116c64ddf08e8a3d302fb09ab61146

The skip flag is never set by the encoder for SPLITMV.

Change-Id: I5ae6457edb3a1193cb5b05a6d61772c13b1dc506

The dc_diff flag is used to skip loopfiltering.  Instead
of setting this flag in the decoder/encoder, we now check
for this condition in the loopfilter.

Change-Id: Ie2b9cdf9e0f4e8b932bbd36e0878c05bffd28931

force_no_skip is always set to zero.

Change-Id: I89b61c5e0bee34627a9c07c05f3517e1db76af77

Code cleanup.  The build inter predictor functions are
redundantly checking the mode_info_context for either
INTRA_FRAME or SPLITMV.

Change-Id: I4d58c3a5192a4c2cec5c24ab1caf608bf13aebfb

in encodframe.c, quant_shift is set to 0 or 1 in vp8cx_invert_quant

only use 8 bits to store this, instead of 16. will allow saving an
xmm register in an updated version of the regular quantize

Change-Id: Ie88c47fe2aff5af0283dab1147fb2791e4b12f90

Remove encoding speed limitation in real-time mode.

Change-Id: Ib5e35d8bb522b2a25f3e4ad5cfe2788ebebb3617

Clean up the code.

Change-Id: I7db048efa4d972b528d553a7921bc45979621129

The error accumulator stats values cpi->prediction_error and
cpi->intra_error were being populated with rd values not
distortion values.

These are only "currently" used in a limited way for RT compress
key frame detection.

Change-Id: I2702ba1cab6e49ab8dc096ba75b6b34ab3573021

MV sad cost error is only used in full-pixel motion search,
which only need full-pixel resolution instead of quarter-pixel
resolution. This change reduced mvsadcost table size, and
removed unneccessary pamameter passing since this table is
constant once it is generated.

Change-Id: I9f931e55f6abc3c99011321f1dfb2f3562e6f6b0

Thread synchronization was not correct when frame width was 1 MB.
Number of allocated encoding threads is limited by the sync_range.
There is no point having more because each thread lags sync_range MBs
behind the thread processing the row above.

http://code.google.com/p/webm/issues/detail?id=302

Change-Id: Icaf67a883beecc5ebf2f11e9be47b6997fdf6f26

The vp8_build_intra_predictors_mby and vp8_build_intra_predictors_mby_s
functions had global function pointers rather than using the RTCD
framework. This can show up as a potential data race with tools such as
helgrind. See https://bugzilla.mozilla.org/show_bug.cgi?id=640935
for an example.

Change-Id: I29c407f828ac2bddfc039f852f138de5de888534

Allow compiling without adding vp8/{common,encoder,decoder} to the
include paths.

Change-Id: Ifeb5dac351cdfadcd659736f5158b315a0030b6c

Change-Id: Icf4b692099d7d249fe3553852b1022b027b28e4b

Improved performance of good quality, speed 0 (3% average)
with no average quality loss.

Change-Id: Ica34473f99bd74260eaebde6b132185e09e3c09d

The encoder was not correctly catching transitions in the quantizer
deltas. If a delta_q was set, then the quantizer would be reinitialized
on every frame, but if they transitioned to 0, the quantizer would
not be reinitialized, leading to a encode-decode mismatch.

This bug was triggered by commit 999e155f, which sets a Y2 delta Q
for very low base Q levels.

Change-Id: Ia6733464a55ee4ff2edbb82c0873980d345446f5

Then removed unnecessary code.

Change-Id: I142658815d843c9396b07881dbdd8d387c43c90e

Restructured function in order to eliminate the prediction
modes save/restore.  Code cleanup also.

Change-Id: I816e3b910de64d0f0f0ddc2398805c63263191e8

Reduce the number of sync points by letting each thread
continue imediatly with a new MB row.
Better multicore scaling, improves performance by 5-20% on ARM multicore.

Change-Id: Ic97e4d1c4886a842c85dd3539a93cb217188ed1b

from vp8cx_encode_intra_macro_block.  prediction_error is used when
deciding if a frame should be a keyframe.  After reviewing this with
Yaowu, it was pointed out that vp8cx_encode_intra_macro_block
is only called for keyframes, so the accumulation is unnecessary.

Change-Id: Id79dc81b80d4f5d124f3a0dba1b923887e2e1ec8

vp8_pick_intra4x4mby_modes uses the passed in distortion
for an early breakout.  The best distortion was never saved
and the distortion for TM_PRED was always used.

Change-Id: Idbaf73027408a4bba26601713725191a5d7b325e

The condition for using RD when selecting the intra coding mode
for a MB is that the RD flag is set AND we're not in real-time
mode.

Previously the code used RD if either the RD flag was set OR
we were not using real-time mode.

Change-Id: Ic711151298468a3f99babad39ba8375f66d55a08