Change-Id: Ieefd76e164ca4aa87597da0412977614ddfbacb7

This patch allows use of 8x8 and 4x4 ADST correctly for Intra
16x16 modes and Intra 8x8 modes when the block size selected
is smaller than the prediction mode. Also includes some cleanups
and refactoring.

Rebase.

Change-Id: Ie3257bdf07bdb9c6e9476915e3a80183c8fa005a

Change-Id: Ia1cce221f8511561b9cbd8edb7726fbc286ff243

Support for gyp which doesn't support multiple objects in the same
static library having the same basename.

Change-Id: Ib947eefbaf68f8b177a796d23f875ccdfa6bc9dc

More cleanup to do after this,  but this is a good chunk of removing rtcd.

Change-Id: I551db75e341a0a85c3ad650df1e9a60dc305681a

Removed the rtcd subpixel invoke functions.

Change-Id: I8b7618bd5813333fac66b2817bdf807616e0fb33

Change-Id: Icf8ad313c543462e523bff89690e5daa8d49bcc0

Experiments with a larger set of contexts and some
clean up to replace magic numbers regarding the
number of contexts.

The starting values and rate of backwards adaption
are still suspect and based on a small set of tests.
Added forwards adjustment of probabilities.

The net result of adding the new context and forward
update is small compared to the old context from the
legacy find_near function.  (down a little on derf but
up by a similar amount for HD)

HOWEVER.... with the new context and forward update
the impact of disabling the reverse update (which may be
necessary in some use cases to facilitate parallel decoding)
is hugely reduced.

For the old context without forward update, the impact of
turning off reverse update (Experiment was with SB off) was
Derf - 0.9, Yt -1.89, ythd -2.75 and sthd -8.35. The impact was
mainly at low data rates.

With the new context and forward update enabled the impact
for all the test sets was no more than 0.5-1% (again most at
the low end).

Change-Id: Ic751b414c8ce7f7f3ebc6f19a741d774d2b4b556

A patch on compound inter-intra prediction.

In compound inter-intra prediction, a new predictor for
16x16 inter coded MBs are obtained by combining a single
inter predictor with a 16x16 intra predictor, in a manner
that the weight varies with distance from the top/left
boundary. The current search strategy is to combine the best
inter mode with the best intra mode obtained independently.

Results so far:

derf +0.31%
yt +0.32%
std-hd +0.35%
hd +0.42%

It is conceivable that the results would improve somewhat
with a more thorough search strategy where all intra modes
are searched given the best mv, or even a joint search for
the best mv and the best intra mode.

Change-Id: I7951f1ed0d6eb31ca32ac24d120f1585bcd8d79b

Change-Id: Ib8f8a66c9fd31e508cdc9caa662192f38433aa3d

Change-Id: I8e12fbab7ec4732b6400ae3a6964749d818c90c9

Silenced a few VS compiler warnings.

Change-Id: I658ea409c36c05cd11042675e2e42ccde0ef2420

This fix ensures that the forward prob update is not turned off for
motion vectors.

Change-Id: I0b63c9401155926763c6294df6cca68b32bac340

Change-Id: Ia1eddb108ec463835e9de8769572d698e21bca49

This fixes encoder/decoder mismatches with the superblock experiment
turned on whenever a superblock is encoded using the 4x4 transform.

Change-Id: Iefec7055e8d25f8efdbba66c4261bbd322d335a3

This should prevent inconsistent results between identical encodes with
the superblock experiment turned on.

Change-Id: I41a005fae53f2eb59736cc70041185fb7d63cfca

Preliminary patch on a new 4x4 intra mode B_CONTEXT_PRED where the
dominant direction from the context is used to encode. Various decoder
changes are needed to support decoding of B_CONTEXT_PRED in conjunction
with hybrid transforms since the scan order and tokenization depends on
the actual direction of prediction obtained from the context. Currently
the traditional directional modes are used in conjunction with the
B_CONTEXT_PRED, which also seems to provide the best results.

The gains are small - in the 0.1% range.

Change-Id: I5a7ea80b5218f42a9c0dfb42d3f79a68c7f0cdc2

Also split superblock handling code out of decode_macroblock() into
a new function decode_superblock(), for easier readability.

Derf +0.05%, HD +0.2%, STDHD +0.1%. We can likely get further gains
by allowing to select mb_skip_coeff for a subset of the complete SB
or something along those lines, because although this change allows
coding smaller transforms for bigger predictors, it increases the
overhead of coding EOBs to skip the parts where the residual is
near-zero, and thus the overall gain is not as high as we'd expect.

Change-Id: I552ce1286487267f504e3090b683e15515791efa

Change-Id: Ib39ad47a7d188f3b45416937b7eeb28c3e79b74c

there are still a couple type of warning left, which are related to
double constants assigned to float type. As those would be addressed
by the conversion of transforms into integer version. This commit
has left those un-dealt with.

Change-Id: I48fd9b489c0c27ad6b543f4177423419f929f2bb

Change-Id: I7cd21b9f1e69f4e0b3338bfe27b3c67e4b47de58

Update vpx_scale from current code in master, run style transform, fix
lint warnings.

Change-Id: I47eadeb5b6881d448ea3728537f9b8a5b5aac78e

Change-Id: Ic084c475844b24092a433ab88138cf58af3abbe4

Most of these were picked up by jenkins in the commit that changed
the vp8 namespace to vp9 in common/.

Change-Id: I5cbd56ffc753b92ef805133cda6acc1713a13878

For non-static functions, change the prefix to vp9_. For static functions,
remove the prefix. Also fix some comments, remove unused code or unused
function prototypes.

Change-Id: I1f8be05362f66060fe421c3d4c9a906fdf835de5

This change encompasses VP8_PTR, VP8_COMP, VP8D_COMP, VP8_COMMON,
VP8Decompressor and VP8Common.

Change-Id: I514ef4ad4e682370f36d656af1c09ee20da216ad

Change-Id: Ic5a5f60e1ff9d9ccae4174160d36529466eeb509

Most of these were picked up in the previous commit (prefix change from
vp8_ to vp9_), but I'm pushing this separately so that it's easier to
review.

Change-Id: I91e959895778b8632d7d33375523df8a7568a490

Change-Id: Ie2e3652591b010ded10c216501ce24fd95d0aec5

Change-Id: Ie8ba934a757acec1c80ac37ab9307c9a2783254e

Change-Id: I77bc38b53428ff3e6456b5bc3516418892a58c1e

Also merge some duplicate code related to the superblock experiment
in the RD loop.

Change-Id: Ic93f1d4d1ed81220fd7ecf6e65da2821a215b2de

Preparation for project restructuring.
Added vp9_ prefix on some function names that have global scope.
Added static declaration on some that dont.

Change-Id: If072f78b4300e8c17cfeed82c5d17b59946dcc5e

Change-Id: I0c689fb44e9e91539c450d26672d7a1d92e92900

Coding and costing of mv reference signal.

Issues in updating MV ref with COMPANDED_MVREF_THRESH
to be resolved. Ideally the MV precision should be defined based
on absolute MV magnitude not as now the MV ref magnitude.

Update to mv counts moved into bitstream.c because otherwise
if the motion reference is changed at the last minute the encoder
and decoder get out of step in terms of the counts used to update
entropy probs.

Code working on a few test clips but no results yet re benefit vs
signaling cost and no tuning of red loop to test lower cost alternatives
based on the available reference values.

Patch 3. Added check to make sure we don't pick a reference
that would give rise to an uncodeable / out of range residual.

Patch 6-7: Attempt to rebase. OK to submit but best to leave flag off for now.

Patch 9. Remove print no longer needed.

Change-Id: I1938c2ffe41afe6d3cf6ccc0cb2c5d404809a712

Should fix B_PRED-related encoder/decoder mismatches.

Change-Id: I16f808dffd19094e02e8562ba58cc1016155ce93

Change-Id: I87d571008c73f0a8514e0a864405aadb82fd1bc0

There is a macro DEFAULT_INTERP_FILTER defined in encoder/onyx_if.c that
is set as EIGHTTAP for now - so SWITCHABLE is not really used. Ideally,
this should be SWITCHABLE but that would make the encoder quite a bit slower.
We will change the default filter to SWITCHABLE once we find a faster way to
search for switchable filters.

Change-Id: Iee91832cdc07e6e14108d9b543130fdd12fc9874

Change-Id: I0d306b0062be59bc785b65882691c956c8b5e7c8

Removes the old mv encoding code.

Change-Id: I1026d48cc5ac15ccb776f98463e929254c3dc7da