Change-Id: I76f440a917832c02d7a727697b225bac66b99f56

Change-Id: I16633269582a640809dca27572bbe99efa6369fc

The commit added reset of pred_mv at the beginning of each SB64x64
partition mv search, also limited the usage of pred_mv only when
search on the largest partition is already done. This is to fix
a crash at speed 1/2 encoder where an invalid mv is used in mv
search.

Change-Id: I39010177da76d054e3c90b7899a44feb2e3a5b1b

This commit enables adaptive constraint on motion search range for
smaller partitions, given the motion vectors of collocated larger
partition as a candidate initial search point.

It makes speed 0 runtime of bus at CIF and 2000 kbps goes from
167s down to 162s (3% speed-up), at 0.01dB performance gains. In
the settings of speed 1, this makes the runtime goes from 33687 ms
to 32142 ms (4.5% speed-up), at 0.03dB performance gains.

Compression performance wise, it gains at speed 1:
derf  0.118%
yt    0.237%
hd    0.203%
stdhd 0.438%

Change-Id: Ic8b34c67810d9504a9579bef2825d3fa54b69454

mode_info_context was stored as a grid of MODE_INFO structs.
The grid now constists of pointers to MODE_INFO structs.  The
MODE_INFO structs are now stored as a stream (decoder only),
eliminating unnecessary copies and is a little more cache
friendly.

Change-Id: I031d376284c6eb98a38ad5595b797f048a6cfc0d

If the current obtained distortion is very small, which happens
for static image case, we pick the current partition type without
further split checking.

This won't affect regular videos. For static videos, we got 10%~12%
encoding speed gain. PSNR was better for some clips, and worse for
others. Overall it was even.

Change-Id: If787a57bedf46fc595ca4f5ded2b0c0a69e9fdef

A previous speed feature skipped modes not used in earlier
partitions but this not longer worked as intended following
changes to the partition coding order and in conjunction
with some other speed features (Especially speed 2 and above).

This modified mode skip feature sets a mask after the first X
modes have been tested in each partition depending on the
reference frame of the current best case.

This patch also makes some changes to the order modes are
tested to fit better with this skip functionality.

Initial testing suggests speed and rd hit count improvements
of up to 20% at speed 1. Quality results. (derf -1.9%, std hd  +0.23%).

Change-Id: Idd8efa656cbc0c28f06d09690984c1f18b1115e1

Added check that the returned max and minimum are
valid in bottom and right border cases.

Change-Id: I2d6cdc9b5f04c7d0ff512ddcf3228331e028bf9b

Initialize the probability model context with default value in
encode_sb.

Change-Id: Id826114024dfc21c7ef41aea9f4a0316d4a5cb95

This reverts commit dae17734

Encode crashes, leaks and increases integer overflow errors.

Change-Id: I595aa2649bb8d0b6552ff91652837a74c103fda2

Change-Id: Ifc9da470358f58e800e3d0d70a565b61e5f7834a

mode_info_context was stored as a grid of MODE_INFO structs.
The grid now constists of a pointer to a MODE_INFO struct and
a "in the image" flag.  The MODE_INFO structs are now stored
as a stream, eliminating unnecessary copies and is a little
more cache friendly.

For the test clips used, the decoder performance improved
by ~4.3% (1080p) and ~9.7% (720p).

Patch Set 2: Re-encoded clips with latest. Now ~1.7% (1080p)
and 5.9% (720p).

Change-Id: I846f29e88610fce2523ca697a9a9ef2a182e9256

Speed 4 fixed partition size. Use fixed size unless it does not
fit inside image, in which case use the largest size that does.

Change-Id: I250f7a80506750dd82ab355721624a1344247223

Switching from mi_{width, height}_log2 and b_{width, height}_log2 to
num_8x8_blocks_{wide, high} and num_4x4_blocks_{wide, high}. Removing
redundant code, adding const.

Change-Id: Iaab2207590fd24d0b76999071778d1395dc5cd5d

Change-Id: I752e374867d459960995b24d197301d65ad535e3

Change-Id: I62bb07c377f947cb72fac68add7a6b199e42c6b9

Change-Id: I8a246b3d056c98be614d05a90bc261e2441ffc10

Change-Id: I481d9bb2fa3ec72b6a83d5f04d545ad8013f295c

I've already renamed d27_predictor to d207_predictor but forgot about the
corresponding constant.

Change-Id: Id312aa80fc5b5a1ab8a709a33418a029552a6857

Previous change c4048dbd limits the mv search range assuming max block
size of 64x64, this commit change the search range using actual block
size instead.

Change-Id: Ibe07ab02b62bf64bd9f8675d2b997af20a2c7e11

Put rectangular partition check flag change according to the rd
costs of NONE and SPLIT partition types under the speed feature.

Change-Id: If681e1e078a8d43d86961ea4b748da5cd1b6c331

Removing unused get_sbuv_perpixel_variance function, using has_second_ref/
is_inter_block functions, organizing includes.

Change-Id: I016de4af12fbbb8b4ece26a70759b2392651b095

gets rid of a mix of styles

Change-Id: I3591d312157bc6f53a25438bf047765c671fd8a8

This commit changes the partition search order of superblocks from
{SPLIT, NONE, HORZ, VERT} to {NONE, SPLIT, HORZ, VERT} for
consistency with that of sub8x8 partition search. It enable the use
of early termination in partition search for all block sizes.

For ped_area_1080p 50 frames coded at 4000 kbps, it makes the runtime
goes down from 844305ms -> 818003ms (3% speed-up) at speed 0.

This will further move towards making the in-search partition types
configurable, hence unifying various speed-up approaches.

Some speed 1 and 2 features are turned off during the refactoring
process, including:
disable_split_var_thresh
using_small_partition_info

Stricter constraints are applied to use_square_partition_only for
right/bottom boundary blocks. Will bring back/refine these features
subsequently. At this point, it makes derf set at speed 1 about
0.45% higher in compression performance, and 9% down in run-time.

Change-Id: I3db9f9d1d1a0d6cbe2e50e49bd9eda1cf705f37c

Adds a couple of minor fixes, which may be absorbed in Jingning's
patch. Thanks to Guillaume for pointing these out.
Also adjusts the thresholds for speed 1 and 2 to 16 and 32
respectively, to keep quality drops small.

Results:
--------
derfraw300:  threshold = 16, psnr -0.082%, speedup 2-3%
             threshold = 32, psnr -0.218%, speedup 5-6%
stdhdraw250: threshold = 16, psnr -0.031%, speedup 2-3%
             threshold = 32, psnr -0.273%, speedup 5-6%

Change-Id: I4b11ae8296cca6c2a9f644be7e40de7c423b8330

It appears that the above/left mb_skip_coeff used during
the pick modes, is left over from the previously
encode frame.  This patch initializes the flag to the default
value of zero.


Change-Id: Ida4684cc99611d6e3e82628db35ed717e28ce550

Using size_group_lookup table and better variable names.

Change-Id: I6e67f2ce091845db43ace7d21b7ae31c6f165aec

Change-Id: I32e43474e8651ef2eb181d24860a8f118cfea7bf

Changes to code to auto select a partition size range
based on data from spatial neighbors.

Now looks at the sb_type in each 8x8 block of above
and left SB64.

The effect on speed 1 is now weaker giving better
quality but less speed gain. Now also used in speed 2.

Change-Id: Iace33a97d5c3498dd2a9a8a4067351941abcbabc

As the pixel values beyond image border are duplicates of pixels
on edge, the change limits the mv search range, any mv beyond
the limits no longer produce new/different prediction values
as entire block with pixels used for subpel interpolation are
outside image border.

Change-Id: I4c6fdf06e33c1cef1489f5470ce0fb4e5e01fb79

Redundant dst, pre[2] from build_inter_predictors_args, unused cm from
encode_b_args.

Change-Id: I2c476cd328c5c0cca4c78ba451ca6ba2a2c37e2d

VP9_COMMON is the right place to segmentatation struct because it has
global segmentation parameters, not something specific to macroblock
processing.

Change-Id: Ib9ada0c06c253996eb3b5f6cccf6a323fbbba708

Adds a speed feature to disable split partition search based on a
given threshold on the source variance. A tighter threshold derived
from the threshold provided is used to also disable horizontal and
vertical partitions.

Results on derfraw300:
threshold = 16, psnr = -0.057%, speedup ~1% (football)
threshold = 32, psnr = -0.150%, speedup ~4-5% (football)
threshold = 64, psnr = -0.570%, speedup ~10-12% (football)

Results on stdhdraw250:
threshold = 32, psnr = -0.18%, speedup is somewhat more than derf
because of a larger number of smoother blocks at higher resolution.

Based on these results, a threshold of 32 is chosen for speed 1,
and a threshold of 64 is chosen for speeds 2 and above.

Change-Id: If08912fb6c67fd4242d12a0d094783a99f52f6c6

The macro block mode info context originally contained an
entry for each 16x16 macroblock. In VP9 each entry refers
to an 8x8 region not a macro block, so the naming is misleading.

This first stage clean up changes the names of 3 entries in the
structure to remove the mb_ prefix.

TODO clean up the nomenclature more widely in respect of
mbmi and bmi.

Change-Id: Ia7305c6d0cb805dfe8cdc98dad21338f502e49c6

Don't do vertical or horizontal splits if subsize < min_partition_size,
except for edge blocks where it makes sense.

Change-Id: I479aa66ba1838d227b5de8312d46be184a8d6401

Adding set_skip_context() function used from both encoder and decoder.

Change-Id: Ia22cfad3211a00a63eb294f64f857b78f4aa9b85

There will be another change set to rename BLOCK_SIZE_TYPE enum to
BLOCK_SIZE.

Change-Id: I8d1dfc873d6186fa5e554262f5169e929978085e

It represents the minimum partition size, so don't split if
bsize == min_partition_size .

Change-Id: Id77c32d6afef7d2ddec0368eaae18fb13227d30e

Loop filter configuration doesn't belong to macroblock, so moving it from
MACROBLOCKD to VP9_COMMON. Also moving the declaration of loopfilter struct
from vp9_blockd.h to vp9_loopfilter.h.

Change-Id: I4b3e34be9623b47cda35f9b1f9951f8c5b1d5d28

The set_offsets call is necessary inorder to set the
mode_info_context ptr correctly.

Change-Id: I644910cc5bacc50ee9cd78458843274ad8ee636d