Removes SEG_ID
Removes MBSKIP
Removes SWITCHABLE_INTERP
Removes INTRA_INTER
Removes COMP_INTER_INTER
Removes COMP_REF_P
Removes SINGLE_REF_P1
Removes SINGLE_REF_P2
Removes TX_SIZE

Change-Id: Ie4520ae1f65c8cac312432c0616cc80dea5bf34b

The resulting reconstruction is never used, thus it just wastes CPU
cycles. Reduces encode time of first 50 frames of bus (speed 0) @
1500kbps from 2min2.0 to 2min1.2, i.e. a 0.65% overall speedup.

Change-Id: I74755ca3aadc21e2be220f486259060bd4088c45

Overall, on all test sets, this gains about +0.2% on all metrics.
City is a clip where this really hurts (-1.0% on all metrics), I'm
not quite sure why yet. Maybe interesting to look into in the future.

Change-Id: I6f0eecb20e72f0194633270d30bf00d76d9eae78

Eliminating usage of mb-units, switching to mi-units. Adding
ALIGN_POWER_OF_TWO macro.

Change-Id: I2491c969f713207c062011878b57e4e531818607

Skips mode searches for intra and compound inter modes depending
on the best mode so far and the reference frames. The various
heuristics to be used are selected by bits from a flag. The
previous direction based intra mode search pruning is also absorbed
in this framework.

Specifically the flags and their impact are:

1) FLAG_SKIP_INTRA_BESTINTER (skip intra mode search for oblique
directional modes and TM_PRED if the best so far is
an inter mode)
derfraw300: -0.15%, 10% speedup

2) FLAG_SKIP_INTRA_DIRMISMATCH (skip D27, D63, D117 and D153
mode search if the best so far is not one of the closest
hor/vert/diagonal directions.
derfraw300: -0.05%, about 9% speedup

3) FLAG_SKIP_COMP_BESTINTRA (skip compound prediction mode
search if the best so far is an intra mode)
derfraw300: -0.06%, about 7-8% speedup

4) FLAG_SKIP_COMP_REFMISMATCH (skip compound prediction search
if the best single ref inter mode does not have the same ref
as one of the two references being tested in the compound mode)
derfraw300: -0.56%, about 10% speedup

Change-Id: I1a736cd29b36325489e7af9f32698d6394b2c495

Removing set_refs, adding set_ref function.

Change-Id: I5635c478b106ae4e57d317f1c83d929644307e63

Change-Id: I32276552b3ea6dc1dce8e298be114cfe1019b31c

sf->unused_mode_skip_lvl. Tests modes as normal for all
sizes at or below the given level. At larger sizes it skips
all modes that were not chosen at any smaller size.
Hence setting BLOCK_SIZE_SB64X64 is in effect off.
Setting BLOCK_SIZE_AB4X4 will only consider modes that
were chosen for one or more 4x4 blocks at larger sizes.

sf->reference_masking.
Do a test encode of the NONE partition at one size and create
a reference frame mask based on the best rd choice. In the
full search only allow this reference frame.
Currently it is testing 64x64 and repeats this in the full search.
This does not work well with Jim's Partition code just now and
is disabled by default.

Change-Id: I8f8c52d2ef4a0c08100150b0ea4155d1aaab93dd

Change-Id: I08fc6e474ff2c12cfa065bae4989c724276e2c83

This commit adds a speed feature where only squared partition are
evaluated in partition picking. Enable this feature in cpu-used 2
reduces encoding time by ~30%.

loss of compression:
-0.9% on cif set
-1.23% on stdhd

Change-Id: Ia6fad11210f0b78365abb889f9245604513be5b9

(1) Refines the modeling function and uses that to add some speed
features. Specifically, intead of using a flag use_largest_txfm as
a speed feature, an enum tx_size_search_method is used, of which
two of the types are USE_FULL_RD and USE_LARGESTALL. Two other
new types are added:
USE_LARGESTINTRA (use largest only for intra)
USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for
inter)

(2) Another change is that the framework for deciding transform type
is simplified to use a heuristic count based method rather than
an rd based method using txfm_cache. In practice the new method
is found to work just as well - with derf only -0.01 down.
The new method is more compatible with the new framework where
certain rd costs are based on full rd and certain others are
based on modeled rd or are not computed. In this patch the existing
rd based method is still kept for use in the USE_FULL_RD mode.
In the other modes, the count based method is used.
However the recommendation is to remove it eventually since the
benefit is limited, and will remove a lot of complications in
the code

(3) Finally a bug is fixed with the existing use_largest_txfm speed feature
that causes mismatches when the lossless mode and 4x4 WH transform is
forced.

Results on derf:
USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction
USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a
pretty good compromise)
USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction
(currently the benefit of modeling is limited for txfm size selection,
but keeping this enum as a placeholder) .
USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing
use_largest_txfm speed feature).

Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936

This cl converts use partition from last frame to do the following:

if part is none,horz, vert -> try split
if part != none and one of the children is not split - try none


Change-Id: I5b6c659e35f3ac9f11c051b92ba98af6d7e8aa87
Signed-off-by: Jim Bankoski <jimbankoski@google.com>

Change-Id: Ia547a5dd7650b771fd00edd673ab9f920270731c

Change-Id: I921c9faba6386535aaf717a54301dd346a9b8540

Adding CHECK_MEM_ERROR macro to vp9_common.h and removing two duplicated
ones from vp9_onyx_int.h and vp9_onyxd_int.h.

Change-Id: I916afec61b3019f18193135dac7c35ed0f89b8b6

This commit change the partition search order to allow checking of
rectangular partition to be done after square partitions. It also
added a speed feature to skip rectangular partition check when
NONE is better than SPLIT in RD sense.

This feature roughly speed up encoder by 1.5X with loss on compression
-0.91% on cif set
-0.56% on stdhd set

Change-Id: I0d2d06993041aa9ea9073fcc39c54f73a127dfa4

Change-Id: I0b2be0ec2c410a527f88b95a44f24ac967b2dac1

Using vp9_set_pred_flag function instead of custom code, adding
decode_tokens function which is now called from decode_atom,
decode_sb_intra, and decode_sb.

Change-Id: Ie163a7106c0241099da9c5fe03069bd71f9d9ff8

This function is empty, hence is removed.

Change-Id: Ia9d01710806bffe0398a6dc9405f8a5a81b27d74

Using consistent function and variable names.

Change-Id: I2deb3fded8797453a2081836c9ce2e79ade06eb7

Each frame we reset all adaptive thresholds to MAX
rather than base. As modes are picked their thresholds
drop down.

Change-Id: Ia37f03a73003c2d9bfcda57edea07205e9a0e5e8

for all regular inter frames at speed 1

Change-Id: I0a8b301273ecf2b8730ab1f6b7a05f89f4d498e0

Change-Id: Ia40229903c08f14020e90e94cfdf494aba1be827

Change vp9_block_error() to return a 64bit error variable, change all
callers to expect a 64bit return value (this will prevent overflows,
which we basically don't check for at all right now). Remove duplicate
block_error() function, which fixed that through truncation. Remove
old (incompatible) mmx/sse2 block_error SIMD versions and replace with
a new one that returns a 64bit value.

Encoding time of first 50 frames of bus @ 1500kbps goes from 3min29 to
3min23, i.e. a 3% overall speedup.

Change-Id: Ib71ac5508b5ee8a80f1753cd85d72df1629abe68

Change-Id: I7960178c95c54d5c4497e44cfc8c493566294b34

adds a new speed feature to force partitioning to be greater than
or less than a certain size

Change-Id: I8c048eeeef93700ae822eccf98f8751a45b2e7d0

this feature lets you set a partitioning size to be used by the entire
frame.

Change-Id: I208a4c8c701375cbb054418266f677768b6f8f06

This uses variance to split partition. Variance is calculated using
nearest mv,  always from last ref frame.

Change-Id: Idd015b4a9aa3bc82591759eac239680c07496896

Change-Id: Ideee45cad8b38087c509cd404484728e85d0c427

This uses the speed feature functionality for code.

Change-Id: I9cd16c0c5f98520ae27ebba81aa2c178546587f8

force us to go through slow partitioning for keyframes, altref and
overlays.

Change-Id: I1a286361bf74083e71973575a7296be46eb98742

Change-Id: I26e80ede80cb4389378a95afa95d229092a9859a

This commit makes use of dual fdct32x32 versions for rate-distortion
optimization loop and encoding process, respectively. The one for
rd loop requires only 16 bits precision for intermediate steps.
The original fdct32x32 that allows higher intermediate precision (18
bits) was retained for the encoding process only.

This allows speed-up for fdct32x32 in the rd loop. No performance
loss observed.

Change-Id: I3237770e39a8f87ed17ae5513c87228533397cc3

Moving single function from vp9_invtrans.c to vp9_encodemb.c.

Change-Id: I26bf6bb90de342a3036c0dbfba78a7dd75a61fe7

Change-Id: I57be4eeaea6e4402f6a0cc04f5c6b7a5d9aedf9b

This commit enables proper partition type search for the bottom-
right corner blocks.

Change-Id: Id1123d0e4e81eba648ed4f3c0c7ab587e174f650

Change-Id: I3baf93c2fa5c2f7f45c6bc5514d317040975da71

Reduces TX_SIZE contexts to 2 for each kind. The code is
cleaner and there is hardly any performance difference with
more than two contexts.

Results: almost neutral

Change-Id: I17656bd6db76224ae2856adf882504560e7dbaa4

This commit enables boundary blocks properly tested over allowable
partition types.

Change-Id: I405a9a46ddcfa0c7af2b63e3644cabfa3b6a951d

Adds coding of transform size within a frame by use of context
of transform sizes selected in left and above blocks.

Also incorporates code for generating stats.

TODO: generate and incorporate new default stats

Change-Id: I6a7af099f6ad61d448521d9a51167aedaf638ed6