This is to fix a decoder crash when decoder skips a number of frame to
continue decoding from a later key frame.

Change-Id: I3ba116eba6c3440e0528a21f53745f694302e4ad

This commit did a couple of minor cleanup/refactoring to prepare for
futher loop filter experiments. It merged y_only version of loop filter
function into the regular one, which makes sure that same logic is used
for functions for picking level and for actual loop filtering.

Change-Id: Id10c94dccd45f58e5310bacfdf6ee63cbb60b86f

Also reindent a block of code that was misindented after addition of
the tx32x32 experiment.

Change-Id: Ic3e4aae3effd8a40136da68c9f382af03632ba08

Change-Id: Ibd7380f478d3127f9db91d0a4fd2fd0dfde961ab

Change-Id: Ib674e0153ca360867ab7a20ba291ac9171a01250

3.2% gains on std/hd, 1.0% gains on hd.

Change-Id: I481d5df23d8a4fc650a5bcba956554490b2bd200

Mode selection for SBs could enter an infinite loop because
the interpolation filter mode index was not being reset
correctly.

Change-Id: I4bbe726f29ef5b6836e94884067c46084713cc11

This experimental change reorders the search so
that all possible references that match the target
reference frame are tested first and these in order
of distance from the current block. These will usually
be the highest scoring candidates.

If we do not find enough good candidates this way
we try non matching cases. These will usually be lower
scoring candidates.

The change in order together with breakouts when
we have found enough candidates should reduce
the computational cost and especially reduce the number
of sort operations.

Quality Results:
Std Hd +0.228%, Hd +0.074%, YT +0.046%, derf +0.137%

This effect is probably due to the fact that more distant
weak candidates are now less likely to get "promoted" over
near candidates even if they are repeated.

Change-Id: Iec37e77d88a48ad0ee1f315b14327a95d63f81f6

Change-Id: I7cdb5c32a1400f88ec36d08ea982e38b77731602

Old Scheme:
When SWITCHABLE filter selection is enabled the encoder
evaluates the use of each interpolation filter type and
selects the best one to use at the MB level. A frame-
level flag can be set to force the use of a particular
filter type for all MBs in a frame if it is more efficient
to encode that way. The logic here involved a Q dependent
threshold that assumed that the second 8-tap filter was
a high-pass filter. However, this requires a trip around
the recode loop. If the frame-level flag indicates use
of a particular filter, the other filters are not
evaluated in the pick_mode loop.

New Scheme:
Each filter type is evaluated at the MB level and a record
of the best filter is kept, irrespective of what filter
is signaled at the frame-level. Once all MBs have been
encoded, a decision is made as to what frame-level mode
to set for the *next* frame. If one filter is used by 80%
or more of the MBs, then this filter is forced since it
is assumed that this will be more efficient if the
next frame has similar characteristics. i.e. there is a
one-frame lag between measuring the filter selection and
setting the frame-level mode to use.

Change-Id: I6a7e7ced8f27e120fafb99db2dc9c6293f8d20f7

Remove special case function cost_coeffs_2x2() and change function
cost_coeffs() to handle 2nd order haar block as it is handle all
other block types already.

Change-Id: I2aac6f81ee0ae9e03d6a8da4f8681d69b79ce41f

This is needed to make the windows build work after
the removal of vp9_type_alisases.h.

Change-Id: I8addf38e9f3c8b864e0e30a8916a26e0264dd02c

Part of NEW_MVREF experiment.
Added update-able probabilities.

Change-Id: I5a4fcf4aaed1d0d1dac980f69d535639a3d59401

Read mode before calling vp9_find_best_ref_mvs(). If the mode is
ZEROMV, the best ref_mvs are not needed. Then, we can skip calling
vp9_find_best_ref_mvs().

Change-Id: I5baa3658dd3f1c7107211cbbbcf919b4584be2e2

The 2-D inverse transform X = M1*Z*Transposed_M2 was calculated
in 2 steps from left to right:
1. Vertical transform: Y = M1*Z
2. Horizontal transform: X= Y*Transposed_M2
In SIMD, a transpose is needed in vertical transform.

Here, switched the calculation order to do it from right to left.
In this way, we could eliminate that transpose by writing the
intermediate results out to their transposed positions.

Change-Id: I34dfe5eb01292f6e363712420d99475e2e81e12c

Various fixups to resolve issues when building vp9-preview under the more stringent
checks placed on the experimental branch.

Change-Id: I21749de83552e1e75c799003f849e6a0f1a35b07

Fixed the warning: the size of array ‘intermediate_buffer’ can’t
be evaluated [-Wvla].

Change-Id: Ibcffd6969bd71cee0c10f7cf18960e58cd0bd915

These filters will not work with VP9.

Change-Id: Ic26c77961084fcea6bfa97f4cd95afdea2282e85

Change-Id: Ibc077cf1c1da0c86063f88c6d3073c6876989119

Change-Id: I75ad0b4ca5b53b5bf759cc26a484ec196d275279

Change-Id: If7822e6fcd0d3568b934032322b19ba3e401df26

Change-Id: I6e43ca73f35401a974ed8ee27738d4318f09fd37

Adds an experiment to derive the previous context of a coefficient
not just from the previous coefficient in the scan order but from a
combination of several neighboring coefficients previously encountered
in scan order.  A precomputed table of neighbors for each location
for each scan type and block size is used. Currently 5 neighbors are
used.

Results are about 0.2% positive using a strategy where the max coef
magnitude from the 5 neigbors is used to derive the context.

Change-Id: Ie708b54d8e1898af742846ce2d1e2b0d89fd4ad5

Missed a file

Change-Id: I33179de6755bc9eda9ad906e4fec6902ace435a5

This patch changes the token packing to call the bool encoder API rather
than inlining it into the token packing function, and similarly removes
a special get_signed case from the detokenizer. This allows easier
experimentation with changing the bool coder as a whole.

Change-Id: I52c3625bbe4960b68cfb873b0e39ade0c82f9e91

Temporary fix for 32-bit mac build errors.

Change-Id: I2038f033cac16ea796097d0edd0f1c3da03246d7

For coefficients, use int16_t (instead of short); for pixel values in
16-bit intermediates, use uint16_t (instead of unsigned short); for all
others, use uint8_t (instead of unsigned char).

Change-Id: I3619cd9abf106c3742eccc2e2f5e89a62774f7da

Change-Id: I004ded11983b7fda85793912ebc5c6f266dc5eb5

Fixed uninitialized warning for txfm_size.

Change-Id: I42b7e802c3e84825d49f34e632361502641b7cbf

Fixed the warning: the size of array ‘intermediate_buffer’ can’t
be evaluated [-Wvla].

Change-Id: Ibcffd6969bd71cee0c10f7cf18960e58cd0bd915

This matches the names of tables for all other transform sizes.

Change-Id: Ia7681b7f8d34c97c27b0eb0e34d490cd0f8d02c6

Change-Id: I9548891d7b8ff672a31579bcdce74e4cea529883

Prefer the standard fixed-size integer typedefs.

Change-Id: Iad75582350669e49a8da3b7facb9c259e9514a5b

where variable is used without initialization

Change-Id: Ic6b52623802641060cad4a72271050aeaf20ad5c

In some cases intra modes in inter frames give
an over smoothed appearance. Especially with
noisy but flat content.

Also in some cases there were problems with key
frame sizing again with very flat but noisy content.

These are temporary changes to help alleviate the
visual problems but will almost certainly hurt metric
results especially at the very low data rate end.

Change-Id: I11549179a19277ffc283d9788bc70168f2a8bdc9

This is to fix a decoder crash when decoder skips a number of frame to
continue decoding from a later key frame.

Change-Id: I3ba116eba6c3440e0528a21f53745f694302e4ad

MSVC 2012 (_MSC_VER=1600) introduced the definition, this commit
prevents the redefinition of the macro

Change-Id: I7de92e7e9e865a342f2bcc4b071f8d3c9b2a508c

Change-Id: I9c651bd7c161974bf5f929446361b00d85e57a3f

The mismatch was caused by an improper merge of cleanup code around
tokenize_b() and stuff_b() with TX32X32 experiment.

Change-Id: I225ae62f015983751f017386548d9c988c30664c

not defined in msvc

Change-Id: I8fe8462a0c2f636d8b43c0243832ca67578f3665