The check '(user_data_end - partition < partition_size)' must be
evaluated as a signed comparison, but because partition_size was
unsigned, the LHS was promoted to unsigned, causing an incorrect
result on 32-bit. Instead, check the upper and lower bounds of
the segment separately.

Change-Id: Ia01708be8492e64abb16b8157e816bd59e2472cf

XMM6/7 are used in these functions, and need to be saved.

Change-Id: I7270ef95b479acf29698d34c8d14bf5600a02d64

Change-Id: I146a7f241efad4f0684cf8613c7fa42bd5cf42f3

Change-Id: Ic9f05dbbe90480d5b172233c87eaf1d4e2f1b48e

This eliminates a large set of warnings exposed by the Mozilla build
 system (Use of C++ comments in ISO C90 source, commas at the end of
 enum lists, a couple incomplete initializers, and signed/unsigned
 comparisons).
It also eliminates many (but not all) of the warnings expose by newer
 GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite
 without checking the return values).
There are a few spurious warnings left on my system:

../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used
 uninitialized in this function
gcc seems to be unable to figure out that the value shortcut doesn't
 change between the two if blocks that test it here.

../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned
 expression >= 0 is always true
../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned
 expression >= 0 is always true
This is true, so far as it goes, but it's comparing against an enum,
 and the C standard does not mandate that enums be unsigned, so the
 checks can't be removed.

Change-Id: Iead6cd561a2afaa3d801fd63f1d8d58953da7426

Turned down the blending level to make colored blocks obscure
the video less.
Not blending the entire block to give distinction to macro
block edges.
Added configuration so that macro block blending function can
be optimized.
Change to constrain line as to when dx and dy are computed.
Now draw two lines to form an arrow.

Change-Id: I986784e6abff65ea3e0d1437dfca7d06d44ede71

If --psnr option is enabled vpxenc will output PSNR values for the
entire file. Added a \n before final output to make sure the output
is on its own line. Overall and Avg psnr matches the values written
to opsnr.stt file.

Change-Id: Ibac5fa9baf8d5a626ea0d6ba161b484e6e8427ee

This patch fixes the system dependent entries for the half-pixel
variance functions in both the RTCD and non-RTCD cases:

  - The generic C versions of these functions are now correct.
    Before all three cases called the hv code.

  - Wire up the ARM functions in RTCD mode

  - Created stubs for x86 to call the optimized subpixel functions
    with the correct parameters, rather than falling back to C
    code.

Change-Id: I1d937d074d929e0eb93aacb1232cc5e0ad1c6184

Specifiying the output file is meaningless when we're not writing to
it.

Change-Id: I271e1d3ae1994d79f0773747477124600f98ca58

Prior clean-up removed the object files, but not the binaries
themselves.

Change-Id: Ic2332188cea88094c14457ebb8b77680a60d581b

MKV requires a unique(ish) TrackID element in the track info header.
Instead of the current hard-coded ID, take a hash of the video track
and use that. This value is not written in the deterministic output
mode, despite being a deterministic value itself, to give flexibility
to change the hash algorithm and not affect bisecting across the
change.

Change-Id: I807fc3ea6d1427a151c3ef703269b67e80aef860

This allows multiple post processor debug levels to be overlayed.
i.e. can show colored reference blocks and visual motion vectors.

Change-Id: Ic4a1df438445b9f5780fe73adb3126e803472e53

ARM used to explicitly remove this file from the build. With the RTCD
changes, that's no longer possible. These errors also exist for x86 w/o
RTCD, but that's not the default configuration

Change-Id: I3e10e5553ddf3278e8d3c9365ca6fb84f52f5066

needs to be _recon_ not _recon_recon_

Change-Id: I7a8b9ddcb4fb72c2b723c563932c9ea52ff15982

NEON has optimized 16x16 half-pixel variance functions, but they
were not part of the RTCD framework. Add these functions to RTCD,
so that other platforms can make use of this optimization in the
future and special-case ARM code can be removed.

A number of functions were taking two variance functions as
parameters. These functions were changed to take a single
parameter, a pointer to a struct containing all the variance
functions for that block size. This provides additional flexibility
for calling additional variance functions (the half-pixel special
case, for example) and by initializing the table for all block sizes,
we don't have to construct this function pointer table for each
macroblock.

Change-Id: I78289ff36b2715f9a7aa04d5f6fbe3d23acdc29c

Post process option to color the block for either the mode
of the macro block, or the frame that the macro block references.

Change-Id: Ie498175497f2d20e3319924d352dc4ddc16f4134

By baking the version number into the output file, a hash of the file
will vary from commit to commit, even if the output is otherwise bit
exact. Add a -D option to suppress this behavior, for use when
bisecting or other debugging.

Change-Id: I5089a8ce5719920ffaf47620fa9069b81fa15673

Change-Id: I18e0a9e00731c23a2bdd1a978c8cb38f71e9029d

ARM NEON has a platform specific version of vp8_recon16x16mb, though
it's just a stub to extract the various parameters from the
MACROBLOCKD struct and pass them to vp8_recon16x16mb_neon(). Using
that function's prototype directly will be a better long term solution,
but it's quite an invasive change.

Change-Id: I04273149e2ade34749e2d09e7edb0c396e1dd620

The ARM version of vp8_hex_search() is a faster implementation
of the same algorithm. Since it doesn't use any ARM specific
code, it can be made the default implementation. This removes
a linking error.

Change-Id: I77d10f2c16b2515bff4522c350004e03b7659934

Some of the ARM functions differed from their generic counterparts
only by unrolling their loops. Since this change may be useful
on other platforms, or might even supercede the looped version
in the generic case, move it back to the generic file.

This code is left under #if ARCH_ARM for now, but it may be worth
considering a different (possibly new) conditional for these. If
it turns out that this should be runtime selectable, these
functions will have to move to the RTCD infrastructure. Don't want
to take that step at this time without more profile data.

Change-Id: I4612fdbc606fbebba4971a690fb743ad184ff15f

These functions were true duplicates of functions present in the
generic code. This fixes some of the link errors when building
with --enable-shared --enable-pic.

Change-Id: Idff26599d510d954e439207883607ad6b74df20c

These functions made global references but did not set up the GOT,
causing compilation failures in PIC mode.

Change-Id: Iac473bf46733f87eb2e001cd736af4acf73fa51d

Change-Id: I83a6f18d2314e5d97759b4ae49afaa52fd8b3c44

The WebM writer requires a seekable stream.

Change-Id: I192e00706a0685362d41b8d2faf80add63d564b9

Requiring the output file to be specified with the -o option opens up
the possibility of supporting multiple input files in the future.

Change-Id: I14c9b75e9b21184b47081e1ccf30cf4c91315964

This patch reworks the default behavior of the tool to output Y4M
instead of writing individual raw frames. The relevant controls are
now:
  --yv12, --i420  - These options change the output format to be
                    raw planar data. The output will be Y4M unless
                    one of these options is specified.

  --flipuv        - Swaps the chroma planes. Works with Y4M output.

  -o, --output    - Sets the output filename. Defaults to stdout if
                    not specified. Supports escape character
                    expansion for frame width (%w) height (%h) and
                    sequence number (%1..%9). The --prefix option
                    has been removed in favor of this escape
                    expansion.

Since the output defaults to stdout if -o is not specified, an
error will be thrown if stdout is not connected to a pipe. This
can be overridden by specifying '-o -'.

Change-Id: I94e42c57ca75721fdd57a6129e79bcdb2afe5d4d

Be quiet by default, to play nicer with scripts.

Change-Id: I68f6c88411fd5487566f268fb73b4e55ae64410c