Removal of code relating to token partitioning

Change-Id: Iaf3c88d6758639a55bd92c3be5c51e6bed407a3c

The "update" variable was used as a flag in coef_prob update dry run
that tests if a frame should encodes update at all. The wrong init
value forced the update happening always. fixing this has a minor
improvement in low bit rate situation when 8x8 transform is allowed.

Change-Id: Icb498e8d6a62fd074dcbc2065b797cba9237cb51

Apparently the correct spelling of segement is segment !

Change-Id: I88593ee0523f251b3a96794c6166ef8c7898a029

Removal of error_resilient_mode features.
The interface has been left in place but does nothing.

Change-Id: I2407863bd0d3c98407354507423ca48d29f63b17

For now the interface elements have been left in place
to make sure existing parameter files work but parameters
relating to drop frame wont do anything.

Change-Id: I579ee614726387381c546845dac4bc03c74c6a07

Fixes a bug that was introduced in the high precision mv patch.

Change-Id: Ieadb433ebe4c3ef3e0e63944dab11528bf8bd73a

Removal of code relating to spatial re sampling

Change-Id: Iff1bc651c62cd528f960c4b27f9673b172e68835

Change-Id: Ifdb17b56090a317b2aa82cf125d57934902c5298

The Lagrangian interpolation filter is maximally flat in the
passband. There is non-trivial improvement with the hd set, while
for derf the results are virtually unchanged.
See:
http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html (derf)
http://www.corp.google.com/~debargha/vp8_results/enhinterpn_hd.html (HD)

Patch 2: Updated the results for derf in the html above to use the
new baseline. There is still about 4% improvement. Will update the
hd baseline later (since it takes 9 hours to run on my machine)

Patch 3: By mistake the default filter was left at 60 - should be 0
to use the new interpolation filter.

Change-Id: If5f64444976562415d68a2aeabb94fdfa0d47890

Removed redundant code for ref frame cost.

* Removes EDGE_PIXEL_FILTER for external sanpshot
* changes the default 8-tap filter based on high precision results
in http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html
* changes the default prob tables for high-precision mv encoding to
favor zeros in the last bit (i.e. quarter pel). This is only important
for short clips.

Change-Id: I02bb0de8679d9eec06cdbcc8160dbf073cd847a4

This is the initial patch for supporting 1/8th pel
motion. Currently if we configure with enable-high-precision-mv,
all motion vectors would default to 1/8 pel. Encode and
decode syncs fine with the current code. In the next phase
the code will be refactored so that we can choose the 1/8
pel mode adaptively at a frame/segment/mb level.

Derf results:
http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html
(about 0.83% better than 8-tap interpoaltion)

Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V

Patch 4: HD results.
http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html
Seems impressive (unless I am doing something wrong).

Patch 5: Added mmx/sse for bilateral filtering, as well as enforced
use of c-versions of subpel filters with 8-taps and 1/16th pel;
Also redesigned the 8-tap filters to reduce the cut-off in order to
introduce a denoising effect. There is a new configure option
sixteenth-subpel-uv whic...

Yunqing fixed an oddity in UVIntra skippable evaluation for stable
branch, which brought up the fact that the evaluation is broken.
The issue was that for MBs with 2nd order block, the eob for 1st
order blocks is set at 1. The previous evaluation did not take that
into account. This commit intend to fix the problem. The commit also
absorbed Yunqing's fix for UVIntra skippable evalution.

Test on hd showed some good gains in combination with LPF bias fix:
http://www.corp.google.com/~yaowu/no_crawl/LPFBias_FixSkip.html
(avg psnr: .34%, glb psnr: .32%, ssim: .22%)

Change-Id: I36af11c8ef7f643e8ff46da7bf3a167b437039d4

The bias in picklpf intended to bias toward less greedy in getting
best frame level psnr while maximize overall quality for a clip.
This commit reduced the bias for frames using 8x8 transform to
achieve better compression overall.

The change improve compression by ~.15% consistently on most of the
HD clips tested.

http://www.corp.google.com/~yaowu/no_crawl/LPFBias_FixSkip.html

Change-Id: Ic30932d2b8eaebd52339b0195f569edc48eed7bc

Removal of most code to do with 1 pass.
Removal of cyclic refresh code.

Change-Id: I74971082bc19dd76e795d4d2e781a0424cec5c8c

Removed some transform code that is not in use.

Change-Id: I9489af7e23d9d7fe052feb6c8bbafa62ebbda39c

The commit rationized and simplified the entropy context conversion
betwen MB using 8x8 transform and MB using 4x4 transform. The old version
had a number of weirdness in how 4x4 transform MB's context is used for
8x8 blocks other than the first 8x8 within a MB.

Test showed the change has a gain ~.1% for avg psnr, glb psnr and ssim on
the limited HD set.

Change-Id: I774536c416baa6845aa741f956d8a69fa40e5d47

Change-Id: I7549e424ca6846b07a796f2b9cd4e9d4e550ca9b

Removal of the pickinter.c and .h files and calls to this
code.

Removal of some code relating to real time and one pass
settings  though there is more to be done in this regard.

However,  vp8_set_speed_features() now
only supports modes 0 and 1 and speeds up to 3
so rd should always be set.

Change-Id: I62c0c1b6154ab499785baef310536080e87bc4d8

this commit changed the UV r/d calculation in the mode decision process to
properly account for the rate of 8x8 transform coefficients.

Change-Id: I485f8f35f2b61db0b6539beb32e83481b1cf083b

the changes are still temporary, the final transforms, especially
inverse ones should take in account both accuracy, complexity, and
sign-bias, which should be decided at a later time.

Change-Id: I116b0c70b25f5ee324ae5713d4564f5d0aa27151

During the work of extend_qrange, we have rolled a factor of 2 from
quantization/dequatnization into 2nd order walsh-hadamard transform.
This commit does the same for the 2nd order haar transform. so they
can share the same quantizaiton process as the 2nd order WHT.

Change-Id: I734af4a20ea8149a01b5b1971a065092977dfe33

Previously, the scaling related to extended quantize range happens in
dequantization stage, which implies the coefficients form forward
transform are in different scale(4x) from dequantization coefficients
This worked fine when there was not distortion computation done based
on 8x8 transform, but it completely wracked the distortion estimation
based on transform coefficients and dequantized transform coefficients
introduced in commit f64725a0 for macroblocks using 8x8 transform.
This commit fixed the issue by moving the scaling into the stage of
inverse 8x8 transform.

TODO: Test&Verify the transform/quantization pipeline accuracy.

Change-Id: Iff77b36a965c2a6b247e59b9c59df93eba5d60e2

Results with the new filter coefficients compared with the previous
versions are here:
http://www.corp.google.com/~debargha/vp8_results/enhinterp.html (derf)
http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd.html (HD)
Overall, the derf set improves by 0.94% with 8-tap filters while
the HD set improves by 0.58%.

Patch 1: resolving merge conflict

Change-Id: I09db0abdab7b08bb19f86d911de23d2123309748