Change-Id: I969406574c6658936e9f6db5752f1b295025aab5

this will allow for separate storage to be used in tile decoding

Change-Id: I025595d83118bdc82a545dae69bc6602e8d2a6e3

update_partition_context / partition_plane_context: this will allow for
separate storage to be used in tile decoding

Change-Id: Ie0bc393531ab7e9d2ce35c95111849b294aad4ed

Change-Id: I1868fb75ed88bfa65c1c2ca24677d65f2894d713

For consistency with idct function names. Renames:
  vp9_short_fdct4x4  -> vp9_fdct4x4
  vp9_short_walsh4x4 -> vp9_fwht4x4

Change-Id: Id15497cc1270acca626447d846f0ce9199770f58

We used set_partition_seg_context() only before calls to:
 1. update_partition_context()
 2. partition_plane_context()

Moving these functions from vp9_blockd.h to vp9_onyxc_int.h and
inlining  set_partition_seg_context into them. After that it is not
necessary to have {above, left}_seg_context fields in MACROBLOCKD struture,
so removing them also.

Change-Id: I4723f59e1c8f3788432b7f51185d8d747b3a97f9

This commit makes the buffer allocation of zcoeff_blk array in
pick_mode_context block size aware. It calculates the number of
4x4 blocks in the partition and assigns the memory space accordingly.
This process (and the uninitialization) is done once for each encoding
pass. It allows memory copy of smaller buffer when possible.

For football at 600kbps, the runtimes improve by about 1%:
speed 1, 45961ms -> 45472ms
speed 2, 23863ms -> 23598ms

Change-Id: Id2ca24906fa89f46fa5fe742ec4b8efc2a61f877

That makes decoder and encoder (only bitstream writing part) a little bit
simpler and faster. Moving get_sb_index() function to the encoder.

Change-Id: Ie91aaeefd69c84b085948267b33556a7666c6278

In deciding the transform size for a given block in a given TX_MODE.

Change-Id: I1467da09853e69cd320695a24c04e19a2f3d04fb

Also avoid using floating-point operations when adaptive quantization is
disabled.

Change-Id: I54936d7afb661df049cdb3ecd246d04ac2a9d8d3

This should make parallel tiles decoding easier to implement.

Change-Id: I6226456dd11f275fa991e4a7a930549da6675915

The only case where they were intentionally pointing to different
structures was in mbgraph, and this didn't have the expected behavior
because both of these pointers are used interchangeably through the code

Change-Id: I979251782f90885fe962305bcc845bc05907f80c

This should be similar to what x264 does with --aq-mode 1.
It works well with clips like parkjoy and touhou
(http://x264.nl/developers/Dark_Shikari/LosslessTouhou.mkv).
At low bitrates, the segmentation signaling overhead may negate the
benefits of this feature.

(PGW) Default changed to feature OFF to allow provisional merge.
Change-Id: I938abf9bb487e1d4ad3b0264ea03d9826275c70b

Updated the encoder to handle frames that are coded
intra-only. Intra-only frames must be non-showable,
that is, the "show frame" flag must be set to 0 in
the frame header.

Tested by forcing the ARF frames to be coded intra-
only.

Note: The rate control code will need to be modified
to account for intra-only frames better than they
are currently handled.

Change-Id: I6a9dd5337deddcecc599d3a44a7431909ed21079

Remove the semicolon in the definition of vp9_zero macro. Make all
the use cases of vp9_zero of consistent format.

Change-Id: Ibaf9751e8595872b12766381a93d185a4d90df8f

Remove the unused variable vp9_64x64_zeros from vp9_encodeframe_.

Change-Id: I34bfdcab9a9105440ad05154c1e0516e70258785

Change-Id: I2d96940fae4c7a16661a43c2bf6907d8b1c1a127

Change-Id: Icbcf68b5b685a56f255ebc3859c9692accdadf9e

Use b_mode_info to store the inter prediction mode of sub8x8 block,
in replacement of the use of partition_info. Remove redundant buffer
update for partition_info. For bus_cif at 2000 kbps, this seem to make
speed 0 about 1% faster.

Change-Id: Id1b3be45e75a24fb4b42335ac480c23e440978f6

We already have itxm_add member in MACROBLOCKD structure. Both
inv_txm4x4_1_add and inv_txm4x4_add are just its special cases for
different eob values. But eob logic is already implemented in
vp9_iwht4x4_add and vp9_idct4x4_add (that's why also removing
inverse_transform_b_4x4_add).

Change-Id: I80bec9b6f7d40c5e5033c613faca5c819c3e6326

Change-Id: Id9d837e062d9c4a94def4b4ed1f49a67c75d3618

The idea is to have the following names for each transform size:

vp9_idct4x4_add
  vp9_idct4x4_1_add
  vp9_idct4x4_10_add
  vp9_idct4x4_16_add

vp9_idct8x8_add
  vp9_idct8x8_1_add
  vp9_idct8x8_10_add
  vp9_idct8x8_64_add

etc for 16x16, 32x32

The actual list of renames in this patch:

vp9_idct_add_lossless     -> vp9_iwht4x4_add
vp9_short_iwalsh4x4_add   -> vp9_iwht4x4_16_add
vp9_short_iwalsh4x4_1_add -> vp9_iwht4x4_1_add

vp9_idct_add            -> vp9_idct4x4_add
vp9_short_idct4x4_add   -> vp9_idct4x4_16_add
vp9_short_idct4x4_1_add -> vp9_idct4x4_1_add

Change-Id: I6f43f7437c68dd30cdd05d72e213765578ed30b1

This commit separates the rate-distortion optimization loop of
superblocks from that of sub8x8 blocks. This allows better design
rate-distortion optimization search loop for each setting. It also
removes the use of SPLITMV and I4X4_PRED therein.

No performance change in speed 0 settings. For bus@CIF at 2000kbps,
the speed 1 runtime goes from 48009ms to 43894ms (about 10% faster).
The overall compression performance on derf changed by -0.021%.

Speed 2 runtime goes from 27114ms to 28700ms (6% slower), while the
overall coding efficiency goes up by 1.629% for derf, 1.236% for yt.

Change-Id: Ie6bdfa0a370148dd60bd800961077f7e97e67dd4

Change-Id: I9a0d0e9c3459954aa7b9c68f92cc5d56385ebd18

Substantial reworking of the speed vs quality trade offs for
speed 1 and 2.

In this patch I am attempting to freeze the "quality" meaning of
speeds 1 and 2 relative to speed 0 so that in future we can
better evaluate progress.

I am targeting :
Speed 1 quality ~-5% vs speed 0.
Speed 2 quality ~-10% vs speed 0

It is inevitable that quality will still fluctuate a little as we adjust
settings and add new features, but we will attempt to keep as
close as possible to these values. Above speed 2 things will remain
a bit more fluid for now.

In this patch speed 1 is approximately 4-5x as fast as speed 0. This
is similar to before but the quality hit is a lot less. Likewise speed 2
is approximately 2x as fast as speed 1 but is similar in quality to the
previous speed 1 configuration.

Also slight change to behavior of FLAG_EARLY_TERMINATE to insure
all reference frames get at least one rd test. Important for very low
variance regions.

WIP :- Added a new speed level with old speed 4 becoming speed 5.
Speed 3 and 4 tradeoffs still WIP

Change-Id: Ic7a38dd7b5b63ab1501f9352411972f480ac6264

This commit causes use last partition to consider whether a 64x64 has
motion that might make a new partitioning worth while.

Change-Id: I3a57bedef4f3cd961fadbfa96651c206fa36da4a

Also renaming mb_row -> mi_row, mb_col -> mi_col arguments and calculate
mb_rows/mb_cols values from mi_rows/mi_cols.

Change-Id: I6919a279f560648e23bc9a12f507d17c21ffd5d7

Make encoder skip rectangular partition check in speed 1 and above,
when early termination was triggered in partition split.
Thanks Guillaume (gmartres@) for catching this issue.

This change makes bus_cif at 2000kbps speed 1 runtime goes down from
25612ms to 23438ms (about 9% speed-up), at the expense of -0.235%
performance down.

Change-Id: I98613fad081a261d30d5fa206f934ca70601c180

The code now takes into account temporal and spatial
information to determine the partition size range, but the
frequency counts have been removed.

The net effect is similar in quality but about 10% faster.

Change-Id: I39a513fb79cec9177b73b2a7218f0da70963ae95

This patch deletes the variance based speed three partitioning.
Speed 3 now uses the same partitioning method as speed 2
but with some stricter conditions.

The speed and quality are now somewhere between speeds 2 and 4
whereas before it was worse in both than speed 4.

Change-Id: Ia142e7007299d79db3ceee6ca8670540db6f7a41

Change-Id: I60dee58a4fd24d3c4f3c101a49d30e217309f43a

Renaming txfm_stepdown_count to tx_stepdown_count and max_txfm_size to
max_tx_size.

Change-Id: Ifc173e22c78240e561a57c4c741b64b1b8fc6fef

Using best_mv[2] array instead of two separate variables.

Change-Id: Iefa0a41f5c42c42f2c66cef26750da68405f0f25

After change of MI context storage , mi_8x8[]  pointer may be null for
a block outside of image border. The commit changes to access the data
only after validation of mi_row and mi_col.

Change-Id: I039c4eb486a228ea9d8e5f35ab9ae6717d718bf3

This commit enables forcing all coefficients zero per transformed
block, when its rate-distortion cost is lower than regular coeff
quantization.

The overall performance improvement (including its parent patch on
calculating rd cost per transformed block) at speed 1:
derf:  0.298%
yt:    0.452%
hd:    0.741%
stdhd: 0.006%

Change-Id: I66005fe0fd7af192c3eba32e02fd6d77952accb5

Change-Id: I584fe50f73879f6a72fada45714ef80893b6d549

Change-Id: I76f440a917832c02d7a727697b225bac66b99f56

Change-Id: I16633269582a640809dca27572bbe99efa6369fc

The commit added reset of pred_mv at the beginning of each SB64x64
partition mv search, also limited the usage of pred_mv only when
search on the largest partition is already done. This is to fix
a crash at speed 1/2 encoder where an invalid mv is used in mv
search.

Change-Id: I39010177da76d054e3c90b7899a44feb2e3a5b1b

This commit enables adaptive constraint on motion search range for
smaller partitions, given the motion vectors of collocated larger
partition as a candidate initial search point.

It makes speed 0 runtime of bus at CIF and 2000 kbps goes from
167s down to 162s (3% speed-up), at 0.01dB performance gains. In
the settings of speed 1, this makes the runtime goes from 33687 ms
to 32142 ms (4.5% speed-up), at 0.03dB performance gains.

Compression performance wise, it gains at speed 1:
derf  0.118%
yt    0.237%
hd    0.203%
stdhd 0.438%

Change-Id: Ic8b34c67810d9504a9579bef2825d3fa54b69454