Moved the threshold adjustment before reference flag checking,
which could set the threshold to INT_MAX for disabled reference
frame, and cause overflow if the adjustment is done after that.

Change-Id: I85e94f8726d5e3ae93f65965aa978721dddc9957

Renamed updating_running_avg() to filter(). Extended function with the rest of
the filter procedure. Made all of the empirically-determined constants used in
VP8 into functions so they can be tweaked more easily.

Change-Id: I41730c8c92370c76885950a43742347477ca4e7e

As in VP8.

Currently, this parameter is set with the VP8E_SET_NOISE_SENSITIVITY flag.
The flag was not renamed so that we don't break the interface for webrtc. This
should probably be changed at some point in the future.

Change-Id: Ic73fcb0dde9d1d019e9d042050b617333ac65472

Change-Id: Icbe05657f0e92c3838e6a5a975f4f82d21328a2e

This commit added a speed feature to control the step_param used in
full pixel motion search. The intention is to reduced the search
steps for high speed real time coding.

Change-Id: I21d2f0105c2b647783a6688615da7fcf2b6d670b

Adapt the use of segmentation in AQ mode 2 based on
the ambient kf/arf/gf Q.

Disable segmentation where the rate per SB is very
low and overheads are likely to outweigh the benefits.

This patch reduces the -ve average metrics impact
of AQ mode 2 while allowing stronger 3 segment AQ
in some cases. Average improvement ~0.5-1.0%.

Change-Id: I5892dfcc7507c5cc6444531cc7fe17554cf8d0c7

The y4m extension used is the same as the one used in ffmpeg/x264.
The patch is adapted from the highbitdepth branch.

Also adds unit tests for y4m header parsing and md5 check
of the raw frame data, as well as y4m writing.

Change-Id: Ie2794daf6dbafd2f128464f9b9da520fc54c0dd6

* changes:
  update vp9_thread.[hc]
  vp9_thread_test: remove unnecessary c_str()'s
  vp9_thread_test: factorize decode loop

This commit re-designs the quantization process for transform
coefficient blocks of size 4x4 to 16x16. It improves compression
performance for speed 7 by 3.85%. The SSSE3 version for the
new quantization process is included.

The average runtime of the 8x8 block quantization is reduced
from 285 cycles -> 255 cycles, i.e., over 10% faster.

Change-Id: I61278aa02efc70599b962d3314671db5b0446a50

Add a conditional compile flag for this feature. Also add a
switch to enable the encoder to use these statistics in the
second pass. Currently, the switch is turned off.

Change-Id: Ia1c858c35ec90e36f19f5cffe156b97ddaa04922

Change-Id: I3d95fbe9a8098256582b5386881d5b7bbdb317ed

The current threshold is knid of low, and in many cases NEWMV
mode is checked but not picked as the best mode. This patch
added a speed feature to increase NEWMV threshold, so that
less partition mode checking goes to check NEWMV. This feature
is enabled for speed 6 and 7.

Rtc set borg tests showed:
1. Speed 6, overall psnr: -0.088%, ssim: -1.339%;
   Average speedup on rtc set is 11.1%.
2. Speed 7, overall psnr: -0.505%, ssim: -2.320%
   Average speedup on rtc set is 12.9%.

Change-Id: I953b849eeb6e0d5a1f13eacba30c14204472c5be

Change-Id: Id52a7869fd1f31bb060de170e3295da7435adb9e

Grayscale is conditionally compiled.

Change-Id: I482ab237560d0bae8d397fd9999e78d38104f2a1

This refelects the profile 1 bitstream change in 6c54dbcb.

Change-Id: I39625d88f236a79b7f2955d79c5a451e3753da16

Change-Id: I74fc5f1a7bab3128cdd49441b83ec3a25aee65ca

Fixed the signed/unsigned mismatch.

Change-Id: Id83d603b8f1745b71f4cf695a0751e55518b1316

pull the latest from WebP, which adds a worker interface abstraction
allowing an application to override init/reset/sync/launch/execute/end

this has the side effect of removing a harmless, but annoying, TSan
warning.

Original source:
 http://git.chromium.org/webm/libwebp.git
  100644 blob 08ad4e1fecba302bf1247645e84a7d2779956bc3 src/utils/thread.c
  100644 blob 7bd451b124ae3b81596abfbcc823e3cb129d3a38 src/utils/thread.h

Local modifications:
 - s/WebP/VP9/g
 - camelcase functions -> lower with _'s
 - associate '*' with the variable, not the type

Change-Id: I875ac5a74ed873cbcb19a3a100b5e0ca6fcd9aed

EXPECT_EQ() works with strings

Change-Id: I2b13369d2aa7ff305ee516e6cb73bd099f8dead9

+ add a SCOPED_TRACE with the current filename

Change-Id: I9ceb47a9154bc0d9f9878a83b707e8ed935790f9

s/VP9DecodeMTTest/VP9DecodeMultiThreadedTest/

this enables simpler test filtering

Change-Id: I010a451cf32fa5a95db6734cc22f331f0a0d515a

fixes:
vp8\encoder\bitstream.h: same type qualifier used more than once

Change-Id: I62b99342131fdaedb1f7cc8d2dcd13ab34637cd7