Change-Id: Ifa17e698149adc063476e7d16eb727f01e88b447

Delete code relating to featureupdates experiment.

Change-Id: If218762c658bb8cbb3007cf2069123b3e05adcbc

Change-Id: Ie8ba934a757acec1c80ac37ab9307c9a2783254e

Change-Id: I2f1781c70b14bf1d7b6da75d1501718445552af0

Change-Id: Ie80d13ce095faa8bca21bcdca3ca8249d9abc398

Also include the correct header in ratectrl.c so it picks up these
function prototypes.

Change-Id: Ic51b13119f1625f0691917f2713b23d0249dece7

Change-Id: Id55f3cd3c2f5857dbfd78703452740dfd63cdf41

Also merge some duplicate code related to the superblock experiment
in the RD loop.

Change-Id: Ic93f1d4d1ed81220fd7ecf6e65da2821a215b2de

Preparation for project restructuring.
Added vp9_ prefix on some function names that have global scope.
Added static declaration on some that dont.

Change-Id: If072f78b4300e8c17cfeed82c5d17b59946dcc5e

Change-Id: I0c689fb44e9e91539c450d26672d7a1d92e92900

Coding and costing of mv reference signal.

Issues in updating MV ref with COMPANDED_MVREF_THRESH
to be resolved. Ideally the MV precision should be defined based
on absolute MV magnitude not as now the MV ref magnitude.

Update to mv counts moved into bitstream.c because otherwise
if the motion reference is changed at the last minute the encoder
and decoder get out of step in terms of the counts used to update
entropy probs.

Code working on a few test clips but no results yet re benefit vs
signaling cost and no tuning of red loop to test lower cost alternatives
based on the available reference values.

Patch 3. Added check to make sure we don't pick a reference
that would give rise to an uncodeable / out of range residual.

Patch 6-7: Attempt to rebase. OK to submit but best to leave flag off for now.

Patch 9. Remove print no longer needed.

Change-Id: I1938c2ffe41afe6d3cf6ccc0cb2c5d404809a712

This fixes edge extension if SB [0,1] doesn't use B_PRED but [1,1] does.

Change-Id: I48354a9dba0de16472938824f5e6db87ce61979f

Change-Id: I87d571008c73f0a8514e0a864405aadb82fd1bc0

Stray CONFIG_HYBRIDTRANSFORM caused decode mismatch.

Change-Id: I1d77bad9b366f7a6ceb3cb45269ed5badb5c4c53

Refactor per-transform copy & paste into a common function
update_coef_probs_common() and read_coef_probs_common(). The dry-run and
bit-writing loops in the encoder are still obvious candidates to be made
common, but they start to diverge a bit in the next commit, so are left
as-is for now.

Change-Id: I896bd3f4a073a6296eab7e92463fef79d8c6c08c

There is a macro DEFAULT_INTERP_FILTER defined in encoder/onyx_if.c that
is set as EIGHTTAP for now - so SWITCHABLE is not really used. Ideally,
this should be SWITCHABLE but that would make the encoder quite a bit slower.
We will change the default filter to SWITCHABLE once we find a faster way to
search for switchable filters.

Change-Id: Iee91832cdc07e6e14108d9b543130fdd12fc9874

Change-Id: I0d306b0062be59bc785b65882691c956c8b5e7c8

Removes the old mv encoding code.

Change-Id: I1026d48cc5ac15ccb776f98463e929254c3dc7da

Change-Id: Ibc4425bb6e01606751021e57c93106c365a2da21

Change-Id: I99f1982b30a630a9a070a8326d83b34a33cba14c

For splitmv, where partitioning is 8x16, 16x8 or 8x8, this patch
uses the 8x8 transform (instead of the 4x4) if txfm_mode is
ALLOW_8X8 or ALLOW_16X16. For TX_MODE_SELECT, splitmv can indicate
which of the 2 transform sizes (4x4 or 8x8) it wants to use.

Gains (with hybridtx4x4/8x8/16x16 and tx_select experiments
enabled) on derf: +0.9%, HD: +0.4%, STD/HD: +0.8% (SSIM or overall
PSNR, both metrics show similar improvements).

Change-Id: Ide954b000b415548ed92a7ac78e24f36e60fcf06

Allows B_VL_PRED & B_LD_PRED modes to be used for all blocks
within a MB in B_PRED mode. These modes were temporarily
disabled with super-block coding.

Change-Id: I973b9bdb82c3da5f12d7cc963162a28805f25303

Pass the bool coder to be used explicitly. This avoids cases where two
different bool coders can be addressed from the same function. Also be
more consistent with bool coder variable naming, start to standardize
on 'bc'.

Change-Id: I1c95e2fdbe24ebe8c0f84924daa1728e3b054a31

Separates the logic on transform type selection previously spread out
over a number of files into a separate function. Currently the tx_type
field in b_mode_info is not used, but still left in there to eventually
use for signaling the transform type in the bitstream.

Also, now for tx_type = DCT_DCT, the regular integer DCT is used, as
opposed to the floating point DCT used in conjuction with hybrid
transform.

Results change somewhat due to the transform change, but are within
reasonable limits. The hd/std-hd sets are slightly up, while derf/yt
are slightly down.

Change-Id: I5776840c2239ca2da31ca6cfd7fd1148dc5f9e0f

remove useless space after address-of operator.

Change-Id: I1fb9e82e8d6cf87558fbd454fb5c0f87599ca2ab

This commit moves a bit of data that ended up packed with the
modes/mv/residual partition during the change to interleaved encoding
into partition 0 where it belongs.

Change-Id: Ic711a378c58d9d6a17254384f492c213a15bad92

Packs the bitstream with each mb's residual following its mode/mv
information.

TODO: There are still a few fields that should be packed into partition
0 but are included in partition 1, due to them being serialized from
write_kfmodes/pack_inter_mode_mvs, which execute after the first
partition is finalized. These need to be separated out into a separate
function, similar to mb_mode_mv_init() in decodemv.c.

Change-Id: I43a46c363601ab36954d07ebe498760e1e2e3af4

Rather than decoding all modes/mvs separately, decode them per MB. This
forces the mode which was already used form the CONFIG_NEWBESTREFMV and
CONFIG_SUPERBLOCKS experiments, and is a precursor to changing to
interleaved encoding.

Change-Id: If19ee74ac8a987846d1cd0cf2b2e02a82f1a43ad

This reinstates reverted commit 2113a831

Change-Id: I9a9af13497d1e58d4f467e3e083fddf06b1b786c

Change the macros PLANE_TYPE_{Y_NO_DC,Y2,UV,Y_WITH_DC} to a typed enum,
and use this typed enum consistently across all places where relevant.
In places where the type is implied (e.g. in functions that only handle
second order planes or chroma planes), remove it as a function argument
and instead hardcode the proper enum in the code directly.

Change-Id: I93652b4a36aa43163d49c732b0bf5c4442738c47

This reverts commit 2113a831

Code clean up - removed rtcd

Change-Id: Id963ecf53c370b1d99484ef18d6befeed7e0c748

This allowed decoding from any key frame after skipping the frames
prior.

Change-Id: I096fccad5346d75ae50a017c94eb8d772a7e8b00

The update_mb_segmentation_map flag was being signalled earlier than
other data dependent on that flag. Consolidate this data so it's
parsed within the same if-scope as the flag is originally parsed in.

Change-Id: I10e90b4f511856445ef75a85a44ff441e1e5e672

Change-Id: Iecb282fc89f9b5145ef31c5eda294ad42bc32a5d

Change-Id: I22aa803ffff330622cdb77277e7b196a9766f882

Currently not used.  Also using this as a test commit into the
experimental branch.

Change-Id: I68c479461ae02f1c7a7f75fa02d1fc0db84bf198

Results: derf (vanilla or +hybridtx) +0.2% and (+hybrid16x16
or +tx16x16) +0.7%-0.8%; HD (vanilla or +hybridtx) +0.1-0.2%
and (+hybrid16x16 or +tx16x16) +1.4%, STD/HD (vanilla or +hybridtx)
about even, and (+hybrid16x16 or +tx16x16) +0.8-1.0%.

Change-Id: I03899e2f7a64e725a863f32e55366035ba77aa62

A variety of issues related to tangling of various hybrid transform
experiments.

Change-Id: I84dac65ff513f8b024407760df55fffa95e198de

Separates the entropy coding context models for 4x4, 8x8 and 16x16
ADST variants.

There is a small improvement for HD (hd/std-hd) by about 0.1-0.2%.
Results on derf/yt are about the same, probably because there is not
enough statistics.

Results may improve somewhat once the initial probability tables are
updated for the hybrid transforms which is coming soon.

Change-Id: Ic7c0c62dacc68ef551054fdb575be8b8507d32a8