Several modules, including DBus, MySQL, and OpenSSL have
configure options of the form <MODULE>_PATH, which is used
on Windows (where pkg-config is not present) to specify the
locations of third-party libraries.  These switches had been
implemented by adding extra variables which were referenced
in .pro files, to add the appropriate compiler and linker
switches.  This is undesirable because it means there are
two independent paths for adding the switches to the build,
which can get out of sync with each other, and indeed this
had happened for some of the DBus tools.

To remedy the situation, all three of the switches were
reworked so that they added values directly to the principal
variables that are used in the project files.  This reduces
maintenance, by ensuring that the pkg-config and non-pkg-config
paths appear the same to the rest of the build system.

Change-Id: Iae342f1d14b79fbcfef9fe38aadc803ad3141799
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>

You are not supposed to call NSOpenGLContext -setView: for a view that
has not yet called drawRect.  We we attempted to do this, we would get
the invalid drawable error, leading to QGLWidgets just drawing garbage.

Task-number: QTBUG-28175
Change-Id: I47aef07b4676f2db8591f98fc1661f6f447bdef9
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>

There has been frequent failures with CI, especially with OSX 10.7.
These seems to work ok in CI node when ran alone but CI is running
those in parallel with some other tests, and this is causing errors,
most likely due to lost focus.

Change-Id: Ic4151099c27a4b5d91778c9b13e88d2d661e8a0d
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>

Change-Id: I71afbb3170869f3cd0313fb7c707062d1599251c
Reviewed-by: Richard J. Moore <rich@kde.org>

Added the same information for QFontMetricsF::elidedText.

Task-number: QTBUG-30865
Change-Id: I57791de21f5721d7a505c3d13f450e5ec6cd2730
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>

Change-Id: Ic87be3b6c7afbde869bd011a3a585b0fe7dbf15d
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>

Remove redundant and invalid exampledirs definition from .qdocconf
for Qt Open GL module.

Change-Id: I5a725bf57d78b2fd35aa4dbd24e8cb3881499ed3
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>

QDoc adds document nodes as files into the .qhp, including nodes with
image subtype. This will generate a lot of unnecessary warnings for
missing '<image>.png.html' files from qhelpgenerator when running
'make docs'.

This change makes qdoc skip the above step for image nodes to remove
the warnings. The images are still always added to .qch in a separate
step.

Change-Id: Ib07fc8a3ce65f5d4dd700daf00f5f6a36f74a696
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>

Task-number: QTBUG-15379

Change-Id: I4a2ca942d2dbfa490302858b589e00bd91e25636
Reviewed-by: Andy Shaw <andy.shaw@digia.com>

Numpad is unnecessarily long.

Change-Id: I19a6ce129e26a4f6f8344f514317214c48abde6e
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: David Faure (KDE) <faure@kde.org>

The implementation that GCC came with from 4.4 to 4.6 used external
locks for most platforms, other than x86. It's unsuitable to be called
"atomic" at all. More importantly, it's not behaviour-compatible with
Qt's own QBasicAtomic classes.

Change-Id: I92a0beab58504e6bd7cd236d358fef905c69821c
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>

You can't write:
  connect(proc, &QProcess::finished, [](){});

because of the overload.

Change-Id: I651cc56ee15481392590dc44942d8e814fad75f6
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>

The lack of eventfd(7) switches and auto detection
caused cross-compilations to fail on Windows hosts,
for builds targeting POSIX systems which do
not support eventfd(7), such as QNX and BB10.

Change-Id: Ic8f53c64066ece6f16d4dbc79c089b058401e632
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>

If a transient scrollbar was hidden during the fade out animation,
it got stuck visible after being shown again. A regression introduced
by f5217782

.

Task-number: QTBUG-31060
Change-Id: I1cda16c6afa4370cce4702d3b4fdaee9f44f9ab9
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>

Change-Id: I9ccb3e4d281a545ca1845db4f6aa7ac6c04e8621
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>

All occurrences of `#if defined(Q_OS_MAC) && !defined(Q_OS_IOS)` have
been replaced with `#if defined(Q_OS_MACX)`.

Change-Id: I5055d9bd1845136beb8ed1c79a8f0f2c0897751a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>

The equivalent was done earlier for qmake, and this will enable
developers writing OS X-specific code to use #ifdef Q_OS_MACX as
opposed to overly verbose #if defined(Q_OS_MAC) && !defined(Q_OS_IOS).

The sole usage of Q_OS_MACX within qtbase has been changed to the
now appropriate value and documentation has been updated.

Change-Id: I2c59eea02e94b691b705170b2f96a97940fdc756
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>

The test showed frequent failures with XCB in
initialShow2() (line 3200) after
01bc3408

 (QTBUG-30923) which
can be fixed by ensuring the widget from the HFW-test is deleted.

Use QScopedPointer to ensure widgets are always deleted in case
of test failures, too.

Task-number: QTBUG-20778
Task-number: QTBUG-30923
Change-Id: I2af7737b604820463f760d6b6787dd5a5a93d602
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>

Compact an object in regular intervals when inserting
data into it, to avoid the object becoming huge.
Compact an object/array before inserting into another
array or object.
Check that the document doesn't get so big it's overflowing
the internal data structures.

Task-number: QTBUG-29288
Change-Id: Id39d80dac1e7d5a11f40819f41b4b336bce16947
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>

Fix connection to pointer to member signal that belongs to the base
class, but whose type is a pointer to a member of the derived class.

The current code only use the QMetaObject of the type coming from the
function type to look up the signal id. But if the signal was casted
to a pointer to member function of a derived type, then we also need to
look in the base classes

Change-Id: Ib98fc38f63942946acb34d9f83c100991d58e4e5
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>

This reverts commit 79e729e1

, which
partially fixed QTBUG-30122 and will need to be reopened.

On the Creator side, we think using the Qt::ToolTip flag is a bit unsafe
since tooltips are supposed to have very limited interactivity. We would
like to propose to use a similar pattern as in QComboBox instead.

Task-number: QTBUG-30702
Change-Id: I245b7d8b16ac870564ea44f24f481ebfec8ca9a1
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>

The Xcode and SDK settings are expensive to resolve, as we're using
system() calls to resolve them. We now try to detect the presence of
a .qmake.cache file (and inform the user that creating one would be
a good idea), and use the file to cache the various settings after
resolving them.

The Xcode logic had to be moved form xcode.conf as part of the mkspec,
into default_pre/post.prf, so that we could cache() the resolved values.

Task-number: QTBUG-30586
Change-Id: Ib5368cfee6f7e4a4a33f6be70d0e20d96896fe56
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>

These two widget-based, mobile-targeted examples are obsolete, defunct,
and/or serve no purpose in Qt 5.

Task-number: QTBUG-31023
Change-Id: Ie5732734bb2547b1ea701d7b3c8dcd806362de09
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>

moc currently silently ignores them, but I have a version which display
a warning.

Change-Id: I9a239cb7e99d40a57a013fb66357c4a6426d6e8b
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>

Change-Id: I1285938efd252346c4016c8f059c7e4f78ca12a9
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>

During qHash refactorings, this line was changed as qt_hash didn't have
an overload taking a QStringRef. This causes a performance regression
w.r.t. the same code in Qt 4.

Task-number: QTBUG-30821
Change-Id: I17b27a54a73cb9061c20f1bd7f79d0c405050edd
Reviewed-by: hjk <hjk121@nokiamail.com>

Change-Id: Ie040fe142a5ee74c7f38a3fd2e6806b41aec4976
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>

Fix gcc 4.8.0 warning about potential use of uninitialized variable.

Change-Id: I0881b1209e9156323b2710c50256d4bed83930ca
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>

qdoc's faux C++ parser did not recognize class declarations
of the form:

class Name1::Name2 {
...
};

...where class Name2 is nested in class Name1. Now it does,
but this fix doesn't handle deeper nestings. doc needs a
proper C++ parser.

Task-number: QTBUG-28664
Change-Id: I5adf88cc1b2ce03f5565250734416bf9592914b5
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>

The brief text for a documented thing is now output as an
attribute of that thing in the module's index file, and it
is reconstituted in the thing's tree node, when qdoc reads
the module's index file later. Only the verbatim text of
the brief is saved in the index file, i.e. no links or
other markup.

The effect is that brief texts can be used in other modules.

Task-number: QTBUG-31021
Change-Id: I932a0c85259b6d1901138f0c0959ddb9815b7db5
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>

Modularized example paths are defined in module-specific .qdocconf
files. This change fixes \example command for a number of examples to
be relative to those paths. This way, the manifest files will have a
correct project path for each example.

Change-Id: I6d3dba34a1eb04a2bc294520102e232ccd0f0ba2
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>

Add an 'isHighlighted' attribute to selected examples to bring them
to the top on Qt Creator Welcome mode/Examples tab.

Task-number: QTBUG-29354
Change-Id: I6c72c11f1f8359d889649ff5b7f91e5c4de583bd
Reviewed-by: Thomas Hartmann <Thomas.Hartmann@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>

There is no longer any difference in install directories between demos
and examples (QT_INSTALL_DEMOS is obsolete and points to the same dir
as QT_INSTALL_EXAMPLES for compatibility). This change removes any
special handling of demos' paths used in manifest xml, enabling the
demos to be visible in Creator welcome mode as well.

Change-Id: I5afdf578a42d001fab05979d3ea1102fd52b51da
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Thomas Hartmann <Thomas.Hartmann@digia.com>

In Qt 5, I managed to break the guarantee that a deserialised local
datetime is the same time of day (potentially different UTC time),
regardless of which timezone it was serialised in. This happened after
I fixed QTBUG-4057 with If650e7960dca7b6ab44b8233410a6369c41df73a,
which serialised datetimes as UTC.

This patch reverts QDateTime serialisation to pre-Qt 5 behaviour to
restore the guarantee and consequently re-opens QTBUG-4057.

Change-Id: Iea877f7ed886f530b928067789b53534e89fe8cb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>

Necessary to make QWindow::fromWinId() work on Mac.

Change-Id: I0dc3a1b0d63cff61d484693aee711dc54fea6b2f
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>

See comment in code and Cocoa event dispatching overview at
https://developer.apple.com/library/mac/#documentation/Cocoa/Conceptual/EventOverview/EventArchitecture/EventArchitecture.html



Task-number: QTBUG-30657
Change-Id: I88907aeeefa4962e1121495cd51af17a8e71b7de
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>

The warning causes a test failure since it occurs with XCB.
Introduced by enabling frame strut events for all widgets
by f2fcf753

 .

Task-number: QTBUG-30530
Task-number: QTBUG-29012
Change-Id: I025b55f5198a270072b33cae033221709db256aa
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>

If tabFocusFirst is not cleared or set to another valid item,
there will be crash later if the removed item is deleted after
removal.

Task-number: QTBUG-30923
Change-Id: Iba9a6ce9334c52f8e552b0accda95ebb5fcfcdb1
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>

Change-Id: I0cd3f8a526e11c3df53fe0cbb063e01c5a3564f9
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>

config.cpp:313:9: error: variable ‘high’ set but not used [-Werror=unused-but-set-variable]

Change-Id: Iacb3cc0f395a3dad7afda1dca167ed8440ac6226
Reviewed-by: Martin Smith <martin.smith@digia.com>