Change-Id: Ie51d6e549d80baae57864d4e0d43a1c58897f149
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>

Previously the UI was only updated when a new service was discovered
on a device. In the extremely rare event of no services being found
the UI was hanging in the "Searching for services" view.

Change-Id: I245216ac4e373a765dea2e182ab541e8830417d0
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>

1.) The QLEController may error out during connectToDevice() which does
not require the eventloop to run. At the same time the services view
is not yet loaded. Subsequently the services view never notices the
errors and loads as if the controller is still trying to connect.

2.) The services view can only be left when a disconnect() signal is
received. During a connection error the disconnect never happens
because the connect never happened. Artificially introduce a disconnect()
when the controller is not connected but disconnect was called by the UI.
This part should be cleaned up to properly allow tracking of the
controller's state in the future.

Change-Id: I2cbd90d55b5e70fb275a8f4563d9436419874e6d
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>

What is really needed is a new ConnectionError for this case. This new
error will shortly be introduced to the btle/5.5 branch.

Change-Id: I751fa0eeb5cf4d0b78863842c94770f4e8e74015
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>

Previously the error was indicated but other UI elements were still
giving the impression that the scan was ongoing.

Change-Id: Iafab8f43bff3303eb6ad5e3385db2f81288d2e66
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>

warning: 'QLowEnergyDescriptorPrivate' defined as a struct here but previously declared as a class [-Wmismatched-tags]

Change-Id: I2b90a645ed5aa2d86184d94acb2658460f26f660
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>

The value is needed for platforms which do not provide this type
information. An example are Android versions below 18.

The enum was added in Qt 5.4. Therefore we need to add
the missing \since tag too.

Change-Id: I23582e7500d8da6740b281ba9821d028c4f33e05
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>

Change-Id: I918bd3b4134504d5bfc3e160adeb97187186df3d
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>

Change-Id: I8c659233fd6eb2232d7bd9d904ce14f1de8a9d34
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>

Change-Id: Ib8800fa30c74678c74df9ed943b143ea4cf49bb2
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>

Change-Id: Ifd6b5ed8176aa7959ed8da0edc762266aa2bd6fa
Task-number: QTBUG-32704
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>

Fix a potential memory leak in _bluez and _qnx versions of copyToTempFile.

Change-Id: I4c21d25b88620747adaaea8f2da561ca0b3d5df6
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>

The disconnected() and stateChanged() signals are delayed which
may easily overlooked by API users. This change specifically points out
this behavior difference.

Change-Id: I3a9e9c656da50c9efe455cd2dbf903a2849e36da
Task-number: QTBUG-41770
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>

Change-Id: I4bf466a3f6c34b338f741ec003343b572e73d738
Task-number: QTBUG-41250
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>

This makes the example more compliant with general UI color guidelines
and cuts out unnecessary code.

Change-Id: I1cf7df602e586a667ebd052ed45baef8eafb6955
Reviewed-by: Sami Makkonen <sami.makkonen@digia.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>

The change makes a few minor cosmetic changes (e.g. sorting by
alphabet and better descriptions) to the overview page too.

Change-Id: I20c6e4735dd531b457fdf52b59f00e8a285a7397
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>

It is realted to nfc socket streaming which we don't support at this
stage.

Change-Id: Idae80decad7aa2cdf7eb67b82ddc3e20384df8b8
Reviewed-by: Martin Leutelt <martin.leutelt@basyskom.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>

Those platforms require a running QBluetoothServer to satisfy the
prerequisites of calling QBluetoothServiceInfo::registerService().
This requirement is imposed by the public API contract anyway.

Change-Id: I2498030fa2787df9745580cd744886693945fe4f
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>

The function didn't return true right after calling listen(). This
is caused by the fakeserverport implementation. On Android listen()
doesn't really initiate the listen until
QBluetoothServiceInfo::registerService() was called. We need to check
the fakeServerPort registration to check whether we are listening
already.

[ChangeLog][QtBluetooth][Android] Fixed broken
QBluetoothServer::isListening(). It returned false right after a
successful call to listen().

Change-Id: I24de02602b401ecbbedaafd19d824170a181e03f
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>

Change-Id: I073b0b4432d7e51516584aa1d23c681bb8544392
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>

Change-Id: I235c54591dbbf04aa58c024093beca8c068b4aed
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>

Change-Id: If1add78a34f4d01313e022bd7af1d53ac2abd535
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>

Change-Id: I9dfff5fbbb8ce939de37fcf1b4f03fd7569b9203
Task-number: QTBUG-36496
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Robert Loehning <robert.loehning@digia.com>

Change-Id: I161cac536d261c517a8323777561f8380b7d4bfb
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>

Re-order some declarations to make the example work on OS X.

Change-Id: I9e74ce7b19a3d749f6ba0f951c1ce013f42729f7
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>

Change-Id: Ic8387dd411a9784b6163a15d423cdeaa5e63ea30
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>

1.) ElidedMiddle makes the text disappear on Debian and Ubuntu. Swapping
elide mode to wrap mode which serves the same purpose

2.) The server was started as rfcomm channel but the client used L2Cap
protocol. It may have worked anyway because rfcomm is based on l2cap.
In any case this shouldn't be relied upon especially since some
platforms don't support l2cap sockets as part of the public API offering.
This way the example becomes more widely usable.

Change-Id: Ibbcd7029d5843e86af0313037b6433017eb92c76
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>

Internal or not yet released classes have been skipped

Change-Id: I5bc3e08f87348ae8df61b923d7cdb81186ebebc8
Task-number: QTBUG-36775
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>

Change-Id: I50d818294cb53962bca2b08edbfdc4558890777c
Task-number: QTBUG-36775
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>

Although no larger changes are expected the QLowEnergy* classes only
provide a limited API commitment.

Change-Id: I244403b8818c2b34a97c8d6f2633e4b94646e49b
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>

service was not declared, it should be lowEnergyService

Change-Id: I1419dbaa865b0bcce51ad2e8cf13c24cef40f1fa
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>

Internally the transfer reply starts via QueuedConnection. Therefore the
finished signal doesn't have to be delayed even further. In addition
document the tight restriction when being interested in signals from
QBluetoothtransferReply.

Change-Id: I0358140e96e1e9709158310c493f34ea5e40582a
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>

The signal makes error handling much more conveniant. One error situation
on QNX did not emit the required finished()/errorType() signals when
required.

A few minor typo fixes.

Task-number: QTBUG-38983
Change-Id: I89c3fbee43921c8894a0ab200ee5550e7dc44543
Reviewed-by: Lars Knoll <lars.knoll@digia.com>

Change-Id: I1249009d90ce9d0a7cc1e1b86a0cde8ca23ad917
Reviewed-by: Lars Knoll <lars.knoll@digia.com>

Conflicts:
	.qmake.conf

Change-Id: Id031d60ca79d8c90063c1d12903e75a418f47290

Task-number: QTBUG-37419
Change-Id: I15cedd382ee98845e51da8cd467fda1d941c1332
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>

This is triggered if the GATT
server complains about missing authorization/encryption
when reading an attribute.

The same mechanism has to be applied to all remaining
read and write types

Change-Id: Ia8330951ffdc61afb98424557bbeffe444e9a812
Reviewed-by: Lars Knoll <lars.knoll@digia.com>

The first step is to monitor encryption changes. Later we will add more
events and possibly commands as needed.

Change-Id: I03ca547678bbfc971f53b32b1efde601685dd7e1
Reviewed-by: Lars Knoll <lars.knoll@digia.com>

Later this will be needed to read/write authorized and encrypted
characteristic/descriptor values.

Change-Id: Ibc70b65b51723d6e0668ee177f5dbd1df2ba047f
Reviewed-by: Lars Knoll <lars.knoll@digia.com>