RDMULT/RDDIV defines a bit worth of distortion in term of sum squared
difference. This has also been used as errorperbit in subpixel motion
search, where the distortions computed as variance of the difference.
The variance of differences is different from sum squared differences
by amount of DC squared. Typically, for inter predicted MBs, this
difference averages around 10% between the two distortion, so this patch
introduces a 110% constant in deriving errorperbit from RDMULT/RDDIV.

Test on CIF set shows small but positive gain on overall PSNR (.03%)
and SSIM (.07%), overall impact on average PSNR is 0.

Change-Id: I95425f922d037b4d96083064a10c7cdd4948ee62

Modify the second-pass code to provide a full golden-frame (GF) bit
allocation boost if the past GF group (GFG) had no alt-ref frame (ARF),
even if the current GFG does contain and ARF.

This mostly has no effect on clips, since switching ARFs on/off between
GFGs is not very common. Has a positive effect on e.g. cheer (+0.45 SSIM
at 600kbps) and football (+0.25 SSIM at 600kbps), particularly at high
bitrates. Has a negative effect (-0.04 SSIM at 300kbps) at pamphlet,
which appears only marginally related to this patch, and crew (-0.1 SSIM
at 700kbps).

Change-Id: I2e32899638b59f857e26efeac18a82e0c0b77089

Replace =1 with =true for yasm tool element. This aids in upgrading
e.g., vs9 project files to vs10.
build/x86-msvs/yasm.xml generated during conversion will require the
Separator attribute to be removed for the build to complete
successfully.

Change-Id: If75c4f9a925529740048882003e9d766c5ac4f0c

The BPRED mode selection uses SSE as a distortion metric, but the early
breakout threshold being used was a variance value.

Change-Id: I42d4602fb9b548bf681a36445701fada5e73aff1

firstpass.c contains some rate adjustment code that assures that the
last few frames in a sequence abide by rate limits. If the second-to-
last group of frames contains an alt-ref frame (ARF), the last golden
frame (GF) is zero bytes, and we will thus spend a ridiculously high
number of bits on regular P-frames trying to hit the target rate. This
does slightly enhance the quality of these last few frames, but has
no perceptual value (other than hitting the target rate).

Disabling this code means we consistently (slightly) undershoot the
target rate and consequently do worse on the last few frames of a
clip, which is particularly noticeable for small clips. The quality-
per-bitrate is generally better, ~0.2% better overall on derf-set,
especially on clips such as garden, tennis, foreman at low bitrates.
Has a negative effect on hallmonitor at high bitrates.

Change-Id: I1d63452fef5fee4a0ad2fb2e9af4c9f2e0d86d23

Change-Id: Iabe2be73af2b92c53687755b31b77448fba385d2

For Intra blocks is enough to check ref_frame == INTRA_FRAME.

Change-Id: I3e2d3064c7642658a9e14011a4627de58878e366

Change-Id: Ib8e429152c9a8b6032be22b5faac802aa8224caa

Moved encode_intra function from firstpass.c to encodeintra.c to
prevent linking problem in real-time only build. Also changed name
of the function to vp8_encode_intra because it is not a static.

Change-Id: Ibf3c6c1de3152567347e5fbef47d1d39564620a5

- Updated -linux-rvct targets to support RVDS 4.0 and later.
- Changed optimization flag to -Otime because -O3 ruined performance
  for RVCT linux targets.
- Added support for --enable-small for RVCT
- RVCT created library should be able to link with GCC
- Supports building shared linux libraries

Change-Id: Ic62589950d86c3420fd4d908b8efb870806d1233

If setup_token_decoder reported an internal error the memory allocated
there would not be freed in the resulting call to _remove_decompressor.

Change-Id: Ib459de222d76b1910d6f449cdcd01663447dbdf6

Small decode performance gain (~1%) on keyframes.  No
noticeable gains on encode.  Also changed pick_intra4x4mby_modes()
to read the above and left block modes for keyframes only.

Change-Id: I1f4885252f5b3e9caf04d4e01e643960f910aba5

instead of every macro block.

Change-Id: I2604e94c6b89e3a8457777e21c8c38406d55b165

Automatically created assembly offset files added to CLEAN-OBJS list
for proper cleanup. This will fix following build error:
1) Build for the workstation
./conigure
make
make clean
2) Build for ARM platform
./configure --target=armv7-linux-gcc
make ==> this will fail because it uses old asm_*_offset.asm files

Change-Id: Id5275c470390ca81b8db086a15ad75af39b80703

call to this set of functions are replaced by var16x16.

Change-Id: I5ff1effc6c1358ea06cda1517b88ec28ef551b0d

uninitialized xd->mode_info_context would crash
vpxenc for --error-resilient=1.

Change-Id: I31849e40281e3d65ab63257cfec5e93398997f0b

Activity update is no longer dependent on being in RD mode, so update
it unconditionally.

Change-Id: Ib617a6fc210dfc045455e3e4467d7ee5e3d1fa0e

Better fix for #326. ICC happens to support the inline magic

Change-Id: Ic367eea608c88d89475cb7b05d73500d2a1bc42b

Broke RVCT. New magic coming for ICC. Stay tuned!

This reverts commit c73eb2ff

Since BPRED will be tested at most once, and SPLITMV is not enabled,
there's nothing to clobber the subblock modes, so there's no need to
save and restore them.

Change-Id: I7c3615b69190c10bd068a44df5488d6e8b85a364

The returned rate was always the 4x4 rate, instead of the rate
matching the selected mode.

Change-Id: I51da31f80884f5e37f3bcc77d1047d31e612ded4

Change-Id: Ib641c624faec28ad9eb99e2b5de51ae74bbcb2a2

In activity masking, RDO constant RDMULT is adjusted on a per MB basis
adaptive to activity with the MB. errorperbit, which is defined as
RDMULT/RDDIV, is a constant used in motion estimation. Previously, in
activity masking, errorperbit is not changed even when RDMULT is changed.
This commit changed to adjust errorperbit according to the change in
RDMULT.

Test in cif set showed a very small but consistent gain by all quality
metrics (average, overall psnr and ssim) when activity masking is on.

Change-Id: I07ded3e852919ab76757691939fe435328273823

This change is analogous to I0b67dae1f8a74902378da7bdf565e39ab832dda7,
which made the move for the non-RD path.

Change-Id: If63fc1b0cd1eb7f932e710f83ff24d91454f8ed1

This commit moves the intra block mode selection from encodeframe.c
to pickinter.c (in the non-RD case). This allowed pick_intra_mbuv_mode
and pick_intra4x4mby_modes to be made static, and is a step towards
refactoring intra mode selection in the main pickinter loop. Gave a
small perf increase (~0.5%).

Change-Id: I0b67dae1f8a74902378da7bdf565e39ab832dda7

Some further re-structuring of activity masking code.
Still has various experimental switches.
Supports a metric based on intra encode.
Experimental comparison against a fixed activity target  rather
than a frame average, for altering rd and zbin.

Overall the SSIM performance is similar  to TT's original
code but there is a much smaller PSNR hit of circa
0.5% instead of 3.2%

Change-Id: I0fd53b2dfb60620b3f74d7415e0b81c1ac58c39a