Using contextual coding of the mkb_skip_coeff flag using the
values of this flag from the left and above. There is a small
improvement of about 0.15% on Derf:
http://www.corp.google.com/~debargha/vp8_results/mbskipcontext.html

Refactored to use pred_common.c by adding a new context type.

Results on HD set (about 0.66% improvement):
http://www.corp.google.com/~debargha/vp8_results/mbskipcontext_hd.html

Incliding missing refactoring to use the pred_common utilities.

Change-Id: I95373382d429b5a59610d77f69a0fea2be628278

The commit added a clamp to the 2nd motion vector used in compound
prediction to insure mv within UMV borders. The clamp is similar to
that of the first motion vector except that No SPLITMV is ever used
for the 2nd motion vector.

Change-Id: I26dd63c304bd66b2e03a083749cc98c641667116

The commit added a new command line option --test-decode to vpxenc.
The option enables encoder to decode compressed frames and test recon
buffers from the decode against those from encode for mismatch.

There are a few limitations on this option currently, one of them
being the match test is not done on a number of lagged frames at
the end of an encoding.

Change-Id: I80c29b46dcdcea9f48107a506b235743068862fe

The recoding loop save and restore frame coding context for recodes.
However in recoding of key frames, some of the coding context saved
was stale from last encoded inter frame. The save/restore sometimes
overwrites the re-inintialized coding context with saved context
from last frame, resulting in encoder/decoder mismatch

Change-Id: I354ae2f71074d142602d51d06544c05a2462caaf

this commit added a command line option to skip first n frames from
input file to facilitate debugging and testing.

Change-Id: I4ffc5f85fa7e193ea4bdee08cb236717de8beef1

In a previous commit, the duplicate of headerfile defaultcoefcounts.h
was identified. This commit updates the .mk file to ensure configure
and make works properly for all platforms.

Change-Id: I31a39c809a734ba438ee53db700f252e9a03eddd

The maximum psnr has a marginal impact on the overall output in high
quality encodings, the change will make sure the psnr output to be
consistent with encoder internal stats.

Change-Id: I35cf2f85008ec127a7d91c9eb69fa7811798ae32

Removed the copy in encoder and changed to use the one in common

Change-Id: Ief0985a50ffd6053a269638fd4816b055ca273ec

Pulled out super block code for the snapshot as this
is not quite ready and will need an extensive re-merge.

Change-Id: I436369b511257447a7b0ea064016cb63f5011849

https://gerrit.chromium.org/gerrit/#change,17319 fixes cost estimating
to take skip_eob into account. No quality difference seen on derf set
tests, but about .4% gain on STD_HD set.

Change-Id: Ic5fe6d35ee021e664a6fcd28037b8432a0e470ca

Change-Id: I4159ff365953598d9c9bc3ecacfb5c5f4a315b45

This gives a modest gain on derf overall, although at low bitrates the
cost is still too high, so this can be improved further.

Patch 2. Re-base and fix 80 column issues

Change-Id: Ida2f9fa3fe75370669f6a27b37108dc602231c63

The commit changed to compute UV intra RD estimates for 4x4 and 8x8
separately to be used in mode decision for MB modes associated with
the appropriate transform size respectively. Now finally after many
other changes related 8x8 quantizer zbin boost and zbin_mode_boost,
this change overall helps the HD(with 8x8) by around ~.13%.
(avg .13%  glb .13% ssim .17%)

The commit also has a few changes for eliminating compiler warnings.

Change-Id: Ibab35dad44820c87e6b44799c66f8d519cc37344

The commit added the correct Zbin_mode_boost initialization based on
Intra Mode before using rate distortion to pick UV intra mode.

Change-Id: I8e57878ff356a06672f6fa2431be860bf9b9a5c7

Change-Id: I4ea6d819bbbde312792c4f813ab63ea50cf0cd1d

Change-Id: I6ade229ff400fe492709010ac5bada37f8afa73e

Change-Id: I8e9b6b154e1a0d0cb42d596366380d69c00ac15f

need further investigation on some odd behavior on one  youtube clip

Change-Id: Iec477986a86b54ef26df2ef69d2f9484e2d1a043

Change-Id: Ie5a7c87d71bd4a541463b68704620d89cec142cf

Incorrect scaling of savings for t8x8.

Change-Id: If01e08f8c73faa73afc3c70e501e6acc54d7e26f

Change-Id: I3b8a230d5b119910e6a6767331a4d97768089355

Change-Id: Ibcd2b9b247ff9f83331dac47f91ec285e8955ff1

Also remove duplicate build_intra_predictors_mby/uv().

Change-Id: I78607e7304952a9b962a5b25af9bb9c48692187b

The commit fixed a problem where 8x8 regular quantizer was using the
4x4 zbinboost lookup table that only has 16 entries at each Q. The
commit assigned a uniform zbin boost value for all cases that there
are more than 16 consective zeros. The change only affects MBs using
8x8 transform. The fix has a slightly positive impact on quality.

Test results:
http://www.corp.google.com/~yaowu/no_crawl/hd_fixzbinb.html
(avg psnr: .26% glb psnr: .21% ssim: .28%)

Results on cif size clip are also positive even though gain is smaller
http://www.corp.google.com/~yaowu/no_crawl/derf_fixzbinb.html

Change-Id: Ibe8f6da181d1fb377fbd0d3b5feb15be0cfa2017

This is the first patch for refactoring of the code related to
high-precision mv, so that 1/4 and 1/8 pel motion vectors can
co-exist in the same bit-stream by use of a frame level flag.
The current patch works fine for only use of 1/4th and
only use of 1/8th pel mv, but there are some issues with the
mode switching in between. Subsequent patches on this change Id
will fix the remaining issues.

Patch 2: Adds fixes to make sure that multiple mv precisions can
co-exist in the bit-stream. Frame level switching has been tested
to work correctly.

Patch 3: Fixes lines exceeding 80 char

Patch 4:
http://www.corp.google.com/~debargha/vp8_results/enhinterp.html

Results on derf after ssse3 bugfix, compared to everything
enabled but the 8-tap, 1/8-subpel and 1/16-subpel uv. Overall the
gains are about 3% now. Hopefully there are no more bugs lingering.
Apparently the sse3 bug affected the quartel subpel results more than
the eighth pel ones (which is understandabale because one bad predictor
due to the bug, matters less if there are a lot more subpel options
available as in the 1/8 subpel case).
The results in the 4th column correspond to the current settings.
The first two columns correspond to two settings of adaptive switching
of the 1/4 or 1/8 subpel mode based on initial Q estimate. These
do not work as good as just using 1/8 all the time yet.

Change-Id: I3ef392ad338329f4d68a85257a49f2b14f3af472

Merge of the NEWLPF configuration experiment so it is always on.

Change-Id: I7054772b6eab28bad1ff807bfa54d98f83de9308

The commit overall on derf test is break even to very slightly positive
comparing to all 4x4 transform.

Change-Id: I2a7c19599aa54c2d3a5b35db0dc891ba8a6a2b26

Removal of some further code relating to partitions
and error resilience.

Spelling correction.

Change-Id: I36067aae67a4a23bec359541dda3400b0bbf26d0

Removal of code relating to token partitioning

Change-Id: Iaf3c88d6758639a55bd92c3be5c51e6bed407a3c

The "update" variable was used as a flag in coef_prob update dry run
that tests if a frame should encodes update at all. The wrong init
value forced the update happening always. fixing this has a minor
improvement in low bit rate situation when 8x8 transform is allowed.

Change-Id: Icb498e8d6a62fd074dcbc2065b797cba9237cb51

Apparently the correct spelling of segement is segment !

Change-Id: I88593ee0523f251b3a96794c6166ef8c7898a029

Removal of error_resilient_mode features.
The interface has been left in place but does nothing.

Change-Id: I2407863bd0d3c98407354507423ca48d29f63b17