Removing redundant function arguments and curly braces.

Change-Id: I46e02561f33fe02e84a3b19756f03b9504bd6a1b

Change-Id: I2dfc569106b29fbe4da20585a0e85e5e9ea6a4db

Reverts to using 128 bit LUT for the coef models rather than 48
to ease hardware implementation.

Also incorporates some cleanups including removing various
hooks to support different lookup tables based on block_type and
ref_type.

Change-Id: I54100c120cca07a2ebd3a7776bc4630fa6a153f6

Merges the experiment.

Change-Id: I4eb19af6de6df6aa3a96a2e82f231d47ed9b3ae9

Cleans up the experiment. Actually uses reduced counts for backward
updates, and reduced number of probabilities in the context.

No change in bitstream when the experiment is on.

Between expt on and off:
derfraw300 is down only -0.062% (which is better than when expts
were run previously).

Change-Id: I55285a049a0c22810bdb42914212ab5a4f8521b5

Unify the tokenize_ function and enable configurable block size for
superblock 8x8. We are immigrating the functionalities of
macroblock handles into superblock ones, and eventually will remove
encode_mb and decode_mb. To be continued on detokenize_ module.

Change-Id: I9f81e8c2291082535cf5e0c4b662eb24fb7c8a7f

Change-Id: I2bc8d775f8d698bf8582f4eecabc2329452e8d9b

Adds an experiment that codes an end-of-orientation symbol
for every eligible zero encountered in scan order.

This cleans out various other sub-experiments that were part
of the origiinal patch, which will be later included if found
useful.

Results are slightly positive on all sets (0.1 - 0.2% range).

Change-Id: I57765c605fefc7fb9d1b57f1b356843602abefaf

Change-Id: I183ec5819d4d80966c92db36db75b8c3be0d381d

Use the common block walker to calculate skippability.

Change-Id: I6721e42f065df237426c91c1d871ec226ba7cdcb

Merge sb32x32 and sb64x64 functions; allow for rectangular sizes. Code
gives identical encoder results before and after. There are a few
macros for rectangular block sizes under the sbsegment experiment; this
experiment is not yet functional and should not yet be used.

Change-Id: I71f93b5d2a1596e99a6f01f29c3f0a456694d728

Pearson correlation for above or left is significantly higher than for
previous-in-scan-order (absolute values depend on position in scan, but
in general, we gain about 0.1-0.2 by using either above or left; using
both basically just makes this even better). For eob branch skipping,
we continue to use the previous token in scan order.

This helps about 0.9% on derf after re-training on a limited data set.
Full re-training and results on larger-resolution clips are pending.

Note that this commit breaks trellis, so we can probably get further
gains out of it by fixing trellis at some later point.

Change-Id: Iead68e296fc3a105cca746b5e3da9555d6010cfe

This also changes the RD search to take account of the correct block
index when searching (this is required for ADST positioning to work
correctly in combination with tx_select).

Change-Id: Ie50d05b3a024a64ecd0b376887aa38ac5f7b6af6

Split macroblock and superblock tokenization and detokenization
functions and coefficient-related data structs so that the bitstream
layout and related code of superblock coefficients looks less like it's
a hack to fit macroblocks in superblocks.

In addition, unify chroma transform size selection from luma transform
size (i.e. always use the same size, as long as it fits the predictor);
in practice, this means 32x32 and 64x64 superblocks using the 16x16 luma
transform will now use the 16x16 (instead of the 8x8) chroma transform,
and 64x64 superblocks using the 32x32 luma transform will now use the
32x32 (instead of the 16x16) chroma transform.

Lastly, add a trellis optimize function for 32x32 transform blocks.

HD gains about 0.3%, STDHD about 0.15% and derf about 0.1%. There's
a few negative points here and there that I might want to analyze
a little closer.

Change-Id: Ibad7c3ddfe1acfc52771dfc27c03e9783e054430

Change-Id: I5416455f8f129ca0f450d00e48358d2012605072

Removing redundant 'extern' keywords and parentheses, fixing indentation,
making variable names lower case, using short expressions x *= c
instead of x = x * c, minor code simplifications.

Change-Id: If6a25fcf306d1db26e90d27e3c24a32735c607de

Change-Id: I7a5314daca993d46b8666ba1ec2ff3766c1e5042

Change-Id: I4f46d142c2a8d1e8a880cfac63702dcbfb999b78

Change-Id: I615651e4c7b09e576a341ad425cf80c393637833

Change-Id: I0df99742029834a85c4933652b0587cf5b6b2587

For coefficients, use int16_t (instead of short); for pixel values in
16-bit intermediates, use uint16_t (instead of unsigned short); for all
others, use uint8_t (instead of unsigned char).

Change-Id: I3619cd9abf106c3742eccc2e2f5e89a62774f7da

Prefer the standard fixed-size integer typedefs.

Change-Id: Iad75582350669e49a8da3b7facb9c259e9514a5b

This commit changed the ENTROPY_CONTEXT conversion between MBs that
have different transform sizes.

In additioin, this commit also did a number of cleanup/bug fix:
1. removed duplicate function vp9_fix_contexts() and changed to use
vp8_reset_mb_token_contexts() for both encoder and decoder
2. fixed a bug in stuff_mb_16x16 where wrong context was used for
the UV.
3. changed reset all context to 0 if a MB is skipped to simplify the
logic.

Change-Id: I7bc57a5fb6dbf1f85eac1543daaeb3a61633275c

Use these, instead of the 4/5-dimensional arrays, to hold statistics,
counts, accumulations and probabilities for coefficient tokens. This
commit also re-allows ENTROPY_STATS to compile.

Change-Id: If441ffac936f52a3af91d8f2922ea8a0ceabdaa5

This adds Debargha's DCT/DWT hybrid and a regular 32x32 DCT, and adds
code all over the place to wrap that in the bitstream/encoder/decoder/RD.

Some implementation notes (these probably need careful review):
- token range is extended by 1 bit, since the value range out of this
  transform is [-16384,16383].
- the coefficients coming out of the FDCT are manually scaled back by
  1 bit, or else they won't fit in int16_t (they are 17 bits). Because
  of this, the RD error scoring does not right-shift the MSE score by
  two (unlike for 4x4/8x8/16x16).
- to compensate for this loss in precision, the quantizer is halved
  also. This is currently a little hacky.
- FDCT and IDCT is double-only right now. Needs a fixed-point impl.
- There are no default probabilities for the 32x32 transform yet; I'm
  simply using the 16x16 luma ones. A future commit will add newly
  generated probabilities for all transforms.
- No ADST version. I don't think we'll add one for this level; if an
  ADST is desired, transform-size selection can scale back to 16x16
  or lower, and use an ADST at that level.

Additional notes specific to Debargha's DWT/DCT hybrid:
- coefficient scale is different for the top/left 16x16 (DCT-over-DWT)
  block than for the rest (DWT pixel differences) of the block. Therefore,
  RD error scoring isn't easily scalable between coefficient and pixel
  domain. Thus, unfortunately, we need to compute the RD distortion in
  the pixel domain until we figure out how to scale these appropriately.

Change-Id: I00386f20f35d7fabb19aba94c8162f8aee64ef2b

Change-Id: I2c252f3ddcc99e96c1f5d3dab8bcb25a2a3637ea

Change-Id: Ia1cce221f8511561b9cbd8edb7726fbc286ff243

Support for gyp which doesn't support multiple objects in the same
static library having the same basename.

Change-Id: Ib947eefbaf68f8b177a796d23f875ccdfa6bc9dc

Change-Id: I7cd21b9f1e69f4e0b3338bfe27b3c67e4b47de58

Change-Id: Ic084c475844b24092a433ab88138cf58af3abbe4

For non-static functions, change the prefix to vp9_. For static functions,
remove the prefix. Also fix some comments, remove unused code or unused
function prototypes.

Change-Id: I1f8be05362f66060fe421c3d4c9a906fdf835de5

For local symbols, make them static instead.

Change-Id: I13d60947a46f711bc8991e16100cea2a13e3a22e

Change-Id: Ie2e3652591b010ded10c216501ce24fd95d0aec5

Change-Id: I23aa5547b1e74f31327258dda0e330aae7ca1d35

This includes trellis optimization, forward/inverse transform,
quantization, tokenization and stuffing functions.

Change-Id: Ibd34132e1bf0cd667671a57b3f25b3d361b9bf8a

Change-Id: I22aa803ffff330622cdb77277e7b196a9766f882

Some cleanups on the transform size and type selection logic.

Change-Id: If2e9675459482242cf83b4f7de7634505e3f6dac

Enable ADST/DCT of dimension 16x16 for I16X16 modes. This change provides
benefits mostly for hd sequences.

Set up the framework for selectable transform dimension.

Also allowing quantization parameter threshold to control the use
of hybrid transform (This is currently disabled by setting threshold
always above the quantization parameter. Adaptive thresholding can
be built upon this, which will further improve the coding performance.)

The coding performance gains (with respect to the codec that has all
other configuration settings turned on) are

derf:   0.013
yt:     0.086
hd:     0.198
std-hd: 0.501

Change-Id: Ibb4263a61fc74e0b3c345f54d73e8c73552bf926

Change-Id: I7524883fb29f42303fb46a5bc6772fbcf8781d1d

Further cases of inconsistent naming convention.

Change-Id: Id3411ecec6f01a4c889268a00f0c9fd5a92ea143