- Add add_constant_residual_8x8 16x16 32x32 functions
- Tested under RealView debugger enviroment

Change-Id: I5c3a432f651b49bf375de6496353706a33e3e68e

Makes cost_coeffs() a lot faster:
4x4: 236 -> 181 cycles
8x8: 888 -> 588 cycles
16x16: 3550 -> 2483 cycles
32x32: 17392 -> 12010 cycles

Total encode time of first 50 frames of bus (speed 0) @ 1500kbps goes
from 2min51.6 to 2min43.9, i.e. 4.7% overall speedup.

Change-Id: I16b8d595946393c8dc661599550b3f37f5718896

Adding CHECK_MEM_ERROR macro to vp9_common.h and removing two duplicated
ones from vp9_onyx_int.h and vp9_onyxd_int.h.

Change-Id: I916afec61b3019f18193135dac7c35ed0f89b8b6

Using vp9_set_pred_flag function instead of custom code, adding
decode_tokens function which is now called from decode_atom,
decode_sb_intra, and decode_sb.

Change-Id: Ie163a7106c0241099da9c5fe03069bd71f9d9ff8

This commit enables configurable reference buffer pointer for intra
predictor. This allows later removal of spatial dependency between
blocks inside a 64x64 superblock in the rate-distortion optimization
loop.

Change-Id: I02418c2077efe19adc86e046a6b49364a980f5b1

Using consistent function and variable names.

Change-Id: I2deb3fded8797453a2081836c9ce2e79ade06eb7

Change-Id: I8299f55c3b930221e52c2237f2ddea65b94fd33b

Change-Id: Idbb2ea80f764fa830fe2ddcfc54ef7fe232f05a8

Removing block index (ib) parameter from get_tx_type_{8x8, 16x16}
functions.

Change-Id: Ia213335aae7a7cb027f97b9cc9b04519840250f1

Change-Id: Ia40229903c08f14020e90e94cfdf494aba1be827

Since intra block decoding is handled by decode_sb_intra() separately.

Change-Id: I42d757884714084c92fc23ec5d35d4dc946f4b15

Change-Id: Iab96e6a50aec543c63e15cd134f9d5f01ca7ceff

Change-Id: Ic924f07c6ab0c929c6cdf11880d3c625806e272c

Change-Id: I183a38997a9d01e4a1b869e92509f6915216fa09

Change-Id: I927c7223996cdeb44f46e0e6c2e2054d458c300b

Moving single function from vp9_invtrans.c to vp9_encodemb.c.

Change-Id: I26bf6bb90de342a3036c0dbfba78a7dd75a61fe7

All elements of this table are equal to 252, so replace it with a
single constant VP9_COEF_UPDATE_PROB.

Change-Id: I1e2d1d284326ce6df9899a740c2fc344b3ec81c9

Avoid calling decode_block, inverse transform/add in the block is
a skip block for SBs smaller than 8x8 and intra-coded SBs.

Change-Id: I1684182f4a0050c8d6bb46cba6830d9425e7127d

- size_t is 64bits in win64. int is 32 bits.

Change-Id: I4e756427ad42c841098a01a216469f65313987e7

This flag no longer needed.

Change-Id: If13482015ddb92d225792ea5c0ee455d2285d1f6

These functions are not used, and appear to have been superceded.

Change-Id: I86fe51b088264f6b1b8d4d232bba97b371b98120

A corrupt bitstream could refer to a reference frame that has no size.

Change-Id: I56c3b71a9dbb58b498e9969403e289c0e574f948

Previous code indexed using the tile length coded in the bitstream
without checking that the read would be valid.

Change-Id: Ia5047762223a4f80d75016dd546dc2ef18b6887d

Removes the case of coding prob = 0 for forward updates, since that
is not an allowed probability to code.
Slightly improves efficiency but may not matter in practice.

Change-Id: I3b4caf82e8f0891992f0706d4089cc5a27568dba

* New probs for subpel filters/tx_count
* Makes a change to not reset to defaults for the tx_size
probs if an intermediate frame reverts to using a fixed tx_size.
* A few updates to the parameters for backward adaptation for mode/mv
* some cosmetic cleanups

derf300: +0.06%

Change-Id: I22994d659bc31ca7a4fc8820fde24001e64a2920

This is consistent with uncompressed header encoding.

Change-Id: Iccf40a44b493ed36ee085b81ed56f7952cde70a9

Remove the bilinear filter mode, and the no-loopfilter mode, and the
related vp9_setup_version() function.

Change-Id: I32311367812faf37863131df3af37d63d03973d7

Implements ability to signal and decode frames that are
encoded using only intra coding modes. Only the decode
side has been implemented here.

Change-Id: I53ac6a8d90422cd08ba389e5236e15b45f9e93de

Reduces TX_SIZE contexts to 2 for each kind. The code is
cleaner and there is hardly any performance difference with
more than two contexts.

Results: almost neutral

Change-Id: I17656bd6db76224ae2856adf882504560e7dbaa4

For key frames everything is the same as before. For inter frames we try
to reference last/golden/altref frame size. If there is no match then the
actual size is encoded. Also we don't allow zero width and height anymore.

Change-Id: I49d791fd94af749c823579b0c5ef17c961372678

Made changes to the frame header to write the sync
code in the frame header for a non-displayable,
intra-only frame.

Extended reset_frame_context to 2-bits.

(Submitting on behalf of Dmitri)

Change-Id: Ie836ae0df9ed572fb4f08aabe9351a555c4f3b96

Adds coding of transform size within a frame by use of context
of transform sizes selected in left and above blocks.

Also incorporates code for generating stats.

TODO: generate and incorporate new default stats

Change-Id: I6a7af099f6ad61d448521d9a51167aedaf638ed6

Refactors mbskip coding to be compatible with coding of the rest of
the symbols. Adds forward/backward adaptation and removes a lot of
the legacy code.

Results:
fast50: +1.6%
derfraw300: +0.317%

Change-Id: I395a2976d15af044d3b8ded5acfa45f6f065f980

Change-Id: Ib44541fbbdcf71ec881814bd6715ea1c6bd82cf4

The partition types of blocks sitting on the frame boundary are
constrained by the block size and the position of each sub-block
relative to the frame. Hence we use truncated probability models
to handle the coding of such information.

100 frames run:
yt 0.138%

Change-Id: I85d9b45665c15280069c0234ea6f778af586d87d

Change-Id: Ifbf790c14cee0c08a27f6728e3c637404e1f8477

Simplify feature to only support a single reference frame
instead of a mask.

Change-Id: I5dd3a98c7a224aafb35708850ab82e2f220e68fb

Just an intermediate change set to simplify merges. Reordering several
uncompressed header bits, code restructuring + minor cleanups.

Change-Id: I28272f520762f8c4e3ad230ae39fff5102ba5c0d

Changes to the coding of transform sizes, along with forward
and backward probability updates.

Results:
derf300: +0.241%

Context based coding of transform sizes will be in a separate
patch.

Change-Id: I97241d60a926f014fee2de21fa4446ca56495756

Wrong max data size (skip has no data) and use of vp9_get_segdata()
when it should be vp9_segfeature_active().

Change-Id: I1eb97d33df6e2a42cc589049f704266fe3639902