Two head files dct.h and dct_x86.h were removed in a previous commit,
this commit removed the build's dependency on the two files.

Change-Id: Idd33712470912d39d42f133dc30b710cab6fa832

Change-Id: I321280abcf48f3dc16e194d29bde2bd3baec6006

Change-Id: Idd2722a538423b451e1e3495f89a7141480493d6

This reinstates reverted commit 2113a831

Change-Id: I9a9af13497d1e58d4f467e3e083fddf06b1b786c

This reverts commit 2113a831

Code clean up - removed rtcd

Change-Id: Id963ecf53c370b1d99484ef18d6befeed7e0c748

This is being reimplemented more generically in terms of affine
transforms.

Change-Id: I9300bfde5f8b93c708c64f59427087720f8ed782

This is a code snapshot of experimental work currently ongoing for a
next-generation codec.

The codebase has been cut down considerably from the libvpx baseline.
For example, we are currently only supporting VBR 2-pass rate control
and have removed most of the code relating to coding speed, threading,
error resilience, partitions and various other features.  This is in
part to make the codebase easier to work on and experiment with, but
also because we want to have an open discussion about how the bitstream
will be structured and partitioned and not have that conversation
constrained by past work.

Our basic working pattern has been to initially encapsulate experiments
using configure options linked to #IF CONFIG_XXX statements in the
code. Once experiments have matured and we are reasonably happy that
they give benefit and can be merged without breaking other experiments,
we remove the conditional compile statements and merge them in.

Current changes include:
* T...

In a previous commit, the duplicate of headerfile defaultcoefcounts.h
was identified. This commit updates the .mk file to ensure configure
and make works properly for all platforms.

Change-Id: I31a39c809a734ba438ee53db700f252e9a03eddd

Removal of the pickinter.c and .h files and calls to this
code.

Removal of some code relating to real time and one pass
settings  though there is more to be done in this regard.

However,  vp8_set_speed_features() now
only supports modes 0 and 1 and speeds up to 3
so rd should always be set.

Change-Id: I62c0c1b6154ab499785baef310536080e87bc4d8

Removed ~CONFIG_REALTIME_ONLY code.

Change-Id: I5fafff29a08acd8928699f9ddce8744787024d8c

For the experimental branch we are trying to slim the codebase
down removing features such as threading for now which complicate
the process of development and testing.

Change-Id: I657c0246aef4d1fa8c8ffc6a1adfeee45bce8e24

This introduces base functions for introducing implicit segmentation.
The code that actually stores the results to the segment map isn't
here yet.   This just prints out the segmentation map results
if you call it.

Uses connected component labeling technique on mbmi info so that only
if 2 mbs are horizontally or vertically touching do they get the same
segment.

vp8next - plumbing for rotation

code to produce taps for rotation ( tapify. py ),  code
for predicting using rotation ( predict_rotated.c ) ,  code
for finding the best rotation find_rotation.c.

didn't checkin code that uses this in the codec.   still work
in progress.

Fixed copyright notice

Change-Id: I450c13cfa41ab2fcb699f3897760370b4935fdf8

This quite large check in includes the following:

Merge in some code from Ronald (mbgraph.c) that scans a Gf/arf group.
This is used as a basis for a simple segmentation for the normal frames
in a gf/arf group. This code also uses satd functions from Yaowu.

Adds functionality for coding the latest possible position of an EOB for
blocks in the segment. (Currently 0-15 only, hence just for 4x4 dct).
Where the EOB position is 0 this acts like "skip" and the normal coding
of skip at the per mb level is disabled.

Added functions (seg_common.c) for setting and reading segment feature
elements. These may want to be optimized away at some point but while the
mecahnism is in a state of flux they provide a single location for making
changes and keep things a bit cleaner.

This is still proof of concept code. Currently the tested feature set:-

Quantizer,
Loop Filter level,
Reference frame,
Prediction Mode,
EOB end stop.

TBD:-

Add functions for setting and reading the feature data with range
and validity checking.

Handling of signed and unsigned feature data. At the moment all is assumed
to be signed and a sign bit is coded but many cannot be negative.

Correct handling of EOB feature with intra coded blocks.

Testing/trapping of legal/illegal ref frame and mode combinations.

Transform size switch plus merge and test with 8c8 DCT work

Merge and test with Sumans Segmenation coding optimizations

Change-Id: Iee12e83661c7abbd1e0ce6810915eb4ec35e2d8e

Copies from a generated table instead of building the
default coeff probabilities during runtime.

Change-Id: I4d9551ea3a2d7d4a4f7ce9eda006495221a8de50

Renamed configure option "enable-psnr" to "enable-internal-stats" to
better reflect the purpose of the option and eliminate the confusion
reported in http://code.google.com/p/webm/issues/detail?id=35

Change-Id: If72df6fdb9f1e33dab1329240ba4d8911d2f1f7a

add an sse4 quantizer so we can use pinsrw/pextrw and keep values in xmm
registers instead of proxying through the stack. and as long as we're
bumping up, use some ssse3 instructions in the EOB detection (see ssse3
fast quantizer)
pick up about a percent on 32bit and about two on 64bit.

Change-Id: If15abba0e8b037a1d231c0edf33501545c9d9363

This patch cleans up the source buffer storage and copy mechanism to
allow access through a standard push/pop/peek interface. This approach
also avoids an extra copy in the case where the source is not a
multiple of 16, fixing issue #102.

Change-Id: I05808c39f5743625cb4c7af54cc841b9b10fdbd9

now that we need asm_enc_offsets.c for x86 and arm and it is
harmless to build it for other targets, add it unconditionally

Change-Id: I320c5220afd94fee2b98bda9ff4e5e34c67062f3

Fix compiling on 32 bit x86.

Change-Id: I6210573e1d9287ac49acbe3d7e5181e309316107

Change-Id: I91921b0a90dbaddc7010380b038955be347964b3

1. Process 16 pixels at one time instead of 8.
2. Add check for both xoffset =0 and yoffset=0, which happens
   during motion search.
This change gave encoder 1%~3% performance gain.

Change-Id: Idaa39506b48f4f8b2fbbeb45aae8226fa32afb3e

It is not used in realtime mode. Reduces memory footprint.

Change-Id: I7f163225762368df5457cfd413050161d3704a3f

Allow compiling without adding vp8/{common,encoder,decoder} to the
include paths.

Change-Id: Ifeb5dac351cdfadcd659736f5158b315a0030b6c

Change-Id: Icf4b692099d7d249fe3553852b1022b027b28e4b

count can be reduced to short because the max number of filtered frames
is set to 15. the max value for any frame is 32 (modifier = 16,
filter_weight = 2). 15*32 = 480 which requires 9 bits

this function goes from about 7000 us / 1000 iterations for the C code
to < 275 us / 1000 iterations for sse2 for block_size = 16 and from
about 1800 us / 1000 iters to < 100 us / 1000 iters for block_size = 8

Change-Id: I64a32607f58a2d33c39286f468b04ccd457d9e6e

(test clip: tulip)
For good quality mode with speed=1, this gave the encoder
a small (2 - 3%) performance boost.

Change-Id: I8a1d4269465944ac0819986c2f0be4b0a2ee0b35

Use mpsadbw, and calculate 8 sad at once. Function list:
vp8_sad16x16x8_sse4
vp8_sad16x8x8_sse4
vp8_sad8x16x8_sse4
vp8_sad8x8x8_sse4
vp8_sad4x4x8_sse4

(test clip: tulip)
For best quality mode, this gave encoder a 5% performance boost.
For good quality mode with speed=1, this gave encoder a 3%
performance boost.

Change-Id: I083b5a39d39144f88dcbccbef95da6498e490134

onyx_if is getting pretty big. split out the temporal code to make it
easier to look at.

Change-Id: I207c3a94c90e91b32e3ea5e1836a53b7a990fabd

Instead of doing 8-bit data unpack and 16-bit subtraction, use
psubb to do 16 8-bit subtractions and pcmpgtb to preserve the
sign information. This does not bring noticable gain since
these functions are not called frequently.

Change-Id: I90a0dfaa3db9d422e4ada324076596ffb178548e

Changes 'The VP8 project' to 'The WebM project', for consistency
with other webmproject.org repositories.

Fixes issue #97.

Change-Id: I37c13ed5fbdb9d334ceef71c6350e9febed9bbba

Remove the dependency on postproc.c for the encoder in general, the only
unchecked need for it is when CONFIG_PSNR is enabled. All other cases
are already wrapped in CONFIG_POSTPROC. In the CONFIG_PSNR case the file
will still be included.

Additionally, when VP8_SET_POSTPROC is used with the encoder when post
processing has been disabled an error will be returned.

This addresses issue #153.

Change-Id: Ia6dfe20167f7077734a6058cbd1d794550346089

vp8_update_gf_useage_maps() is only used by the encoder. This patch
fixes the ability to build in decode-only or encode-only
configurations.

Change-Id: I3a5211428e539886ba998e09e8abd747ac55c9aa

The libs.mk file must be installed for the vpx.vcproj file to be
generated. It was being installed, but not in the src/ directory as
expected.

Also missed include files yasm.rules, quantize_x86.h

Change-Id: Ic1a6f836e953bfc954d6e42a18c102a0114821eb

Change-Id: Ib479210067510162879c368428b92690591120b2

The new fdct lowers the round trip sum squared error for a
4x4 block ~0.12. or ~0.008/pixel. For reference, the old
matrix multiply version has average round trip error 1.46
for a 4x4 block.

Thanks to "derf" for his suggestions and references.

Change-Id: I5559d1e81d333b319404ab16b336b739f87afc79

When the license headers were updated, they accidentally contained
trailing whitespace, so unfortunately we have to touch all the files
again.

Change-Id: I236c05fade06589e417179c0444cb39b09e4200d

Added sse2 version of vp8_regular_quantize_b which improved encode
performance(for the clip used) by ~10% for 32 bit builds and ~3% for
64 bit builds.

Also updated SHADOW_ARGS_TO_STACK to allow for more than 9 arguments.

Change-Id: I62f78eabc8040b39f3ffdf21be175811e96b39af

ssim.c comiles in a huge (512M) amount of global scratch space. Allocating
this data on the heap would be a better solution, but this file doesn't
need to be built at all in most cases, so as a first pass, disable it
except when doing opsnr.stt output (--enable-psnr).

Change-Id: I320d812f6d652a12516a16b52295ebff20b5bd42

This patch adds support for building shared libraries when configured
with the --enable-shared switch.

Building DLLs would require more invasive changes to the sample
utilities than I want to make in this patch, since on Windows you can't
use the address of an imported symbol in a static initializer. The best
way to work around this is proably to build the codec interface mapping
table with an init() function, but dll support is of questionable value
anyway, since most windows users will probably use a media framework
lib like webmdshow, which links this library in staticly.

Change-Id: Iafb48900549b0c6b67f4a05d3b790b2643d026f4