Change-Id: If9fc2df4051ccfb8d804dae9d1be08d12d0f81ce

remove useless space after address-of operator.

Change-Id: I1fb9e82e8d6cf87558fbd454fb5c0f87599ca2ab

Packs the bitstream with each mb's residual following its mode/mv
information.

TODO: There are still a few fields that should be packed into partition
0 but are included in partition 1, due to them being serialized from
write_kfmodes/pack_inter_mode_mvs, which execute after the first
partition is finalized. These need to be separated out into a separate
function, similar to mb_mode_mv_init() in decodemv.c.

Change-Id: I43a46c363601ab36954d07ebe498760e1e2e3af4

This reinstates reverted commit 2113a831

Change-Id: I9a9af13497d1e58d4f467e3e083fddf06b1b786c

This way a caller doesn't need to implement the logic for which (and how
many) tokens to write out to stuff one macroblock worth of EOBs. Make
the actual function implementations static, since they are now only used
in tokenize.c; also do some minor stylistic changes so it follows the
style guide a little more closely; use PLANE_TYPE where appropriate,
remove old (stale) frame_type function arguments; hardcode plane type
where only a single one is possible (2nd order DC or U/V EOB stuffing);
support stuffing 8x8/4x4 transform EOBs with no 2nd order DC.

Change-Id: Ia448e251d19a4e3182eddeb9edd034bd7dc16fa3

Also make some minor stylistic changes to bring the code closer to
the style guide. Remove distinction between inter and intra transform
functions, since both do exactly the same thing except for the check
against SPLITMV for the second-order transform. Remove some commented
out debug code. Remove 8x8/16x16 transform code in encode_inter16x16y(),
since the first-pass only uses 4x4 anyway.

Change-Id: Ife54816ff759825b9141f95dc2ba43c253c14dba

This includes trellis optimization, forward/inverse transform,
quantization, tokenization and stuffing functions.

Change-Id: Ibd34132e1bf0cd667671a57b3f25b3d361b9bf8a

This reverts commit 2113a831

Code clean up - removed rtcd

Change-Id: Id963ecf53c370b1d99484ef18d6befeed7e0c748

Entropy coding takes care of this anyway, and this causes changes to
the txfm size assigned to skip blocks, which can affect the loopfilter
output, thus causing encoder/decoding mismatches.

Change-Id: I591a8d8a4758a507986b751a9f83e6d76e406998

Change-Id: Iecb282fc89f9b5145ef31c5eda294ad42bc32a5d

Change-Id: I22aa803ffff330622cdb77277e7b196a9766f882

Convert copy16x16 from invoke to rtcd.  The first in a long
string of converts.

Change-Id: I296b0aa32f40e9fb649f7a3cb914a4e5300cad63

Results: derf (vanilla or +hybridtx) +0.2% and (+hybrid16x16
or +tx16x16) +0.7%-0.8%; HD (vanilla or +hybridtx) +0.1-0.2%
and (+hybrid16x16 or +tx16x16) +1.4%, STD/HD (vanilla or +hybridtx)
about even, and (+hybrid16x16 or +tx16x16) +0.8-1.0%.

Change-Id: I03899e2f7a64e725a863f32e55366035ba77aa62

Separates the entropy coding context models for 4x4, 8x8 and 16x16
ADST variants.

There is a small improvement for HD (hd/std-hd) by about 0.1-0.2%.
Results on derf/yt are about the same, probably because there is not
enough statistics.

Results may improve somewhat once the initial probability tables are
updated for the hybrid transforms which is coming soon.

Change-Id: Ic7c0c62dacc68ef551054fdb575be8b8507d32a8

With this change, even if hybridtransform8x8 experiment is off,
8x8 dct is used for the I8x8 mode. However note that the gains
observed with the hybridtransform8x8 experiment will now be less,
since part of the gain is now merged in.

Change-Id: I9afb3880906fd0a1368a374041fc08efcf060c54

for MBs using i8x8 prediciton mode when hybridtransform8x8 is not
enabled in configure.

Change-Id: I3e3c8bb1c0261108c1c71213ca9557b0ce558036

Some cleanups on the transform size and type selection logic.

Change-Id: If2e9675459482242cf83b4f7de7634505e3f6dac

This reverts commit c5af82b7

There was a mismatch bug introduced by this patch. Hence reverting until it is fixed.

Some cleanups that will make it easier to maintain the code
and incorporate upcoming changes on  entropy coding for the
hybrid transforms.

Change-Id: I44bdba368f7b8bf203161d7a6d3b1fc2c9e21a8f

This commit merges those parts of the CONFIG_NEW_MVREF
that specifically relate to choosing a better set of candidate
MV references into the NEWBESTREFMV experiment.

CONFIG_NEW_MVREF will then be used for changes relating
to the explicit coding of a cost optimized MV reference in the
bitstream as part of MV coding.

Change-Id: Ied982c0ad72093eab29e38b8cd74d5c3d7458b10

Adds a new experiment with redesigned/refactored motion vector entropy
coding. The patch also takes a first step towards separating the
integer and fractional pel components of a MV. However the fractional
pel encoding still depends on the integer pel part and so they are
not fully independent. Further experiments are in progress to see
how much they can be decoupled without affecting performance.
All components including entropy coding/decoding, costing for MV
search, forward updates and backward updates to probability tables,
have been implemented.

Results so far:
derf: +0.19%
std-hd: +0.28%
yt: +0.80%
hd: +1.15%

Patch: Simplifies the fractional pel models:
derf: +0.284%
std-hd: +0.289%
yt: +0.849%
hd: +1.254%

Patch: Some changes in the models, rebased.
derf: +0.330%
std-hd: +0.306%
yt: +0.816%
hd: +1.225%

Change-Id: I646b3c48f3587f4cc909639b78c3798da6402678

Enable ADST/DCT of dimension 16x16 for I16X16 modes. This change provides
benefits mostly for hd sequences.

Set up the framework for selectable transform dimension.

Also allowing quantization parameter threshold to control the use
of hybrid transform (This is currently disabled by setting threshold
always above the quantization parameter. Adaptive thresholding can
be built upon this, which will further improve the coding performance.)

The coding performance gains (with respect to the codec that has all
other configuration settings turned on) are

derf:   0.013
yt:     0.086
hd:     0.198
std-hd: 0.501

Change-Id: Ibb4263a61fc74e0b3c345f54d73e8c73552bf926

Alternative strategy for finding a list of candidate motion
vectors to use as reference values in mv coding and as
nearest and near.

Sort by sad in vp8_find_best_ref_mvs() rather than just
pick the best. Allow 0,0 as a best ref option but not a
nearest or near unless there are no alternatives.

Encode/Decode verified on at least some clips.

Some commented out experimental and stats code still in place.

Gain over existing code averages about 1% on derf (alll metrics)
with improvement on all clips. Other test results pending.

The entropy coding of the mode (nearest/near etc) still
depends upon and requires the old "findnear" code so
this needs looking at and may provide room for further gains.

Change-Id: I871d7cba1d1c379c4bad9bcccce1fb19c46b8247

Change-Id: Iccb56e3b966d1519ba49dfe4e1396479c6b54a6f

This commit adds a pick_sb_mode() function which selects the best 32x32
superblock coding mode. Then it selects the best per-MB modes, compares
the two and encodes that in the bitstream.

The bitstream coding is rather simplistic right now. At the SB level,
we code a bit to indicate whether this block uses SB-coding (32x32
prediction) or MB-coding (anything else), and then we follow with the
actual modes. This could and should be modified in the future, but is
omitted from this commit because it will likely involve reorganizing
much more code rather than just adding SB coding, so it's better to let
that be judged on its own merits.

Gains on derf: about even, YT/HD: +0.75%, STD/HD: +1.5%.

Change-Id: Iae313a7cbd8f75b3c66d04a68b991cb096eaaba6

Further cases of inconsistent naming convention.

Change-Id: Id3411ecec6f01a4c889268a00f0c9fd5a92ea143

Change-Id: I9c7ef4a75c37aa0e10df75e165e3066614c955ef

References to MACROBLOCKD that use "x" changed to "xd"
to comply with convention elsewhere that x = MACROBLOCK
and xd = MACROBLOCKD.

Simplify some repeat references using local variables.

Change-Id: I0ba2e79536add08140a6c8b19698fcf5077246bc

Change-Id: I8e72279cc68f34d269705f06cdaf8f3d06eed635

Change-Id: Id38baf1b89648ef534e28be72f583137871f920c

Add local variable in several places to reference the MB mode
info structure. Currently this is usually accessed in the code as
x->e_mbd.mode_info_context->mbmi.* or in some places
xd->mode_info_context->mbmi.*

Resolved some uses of x-> for the MACROBLOCKD structure.

Rebased without dependency on motion reference experiment.

Change-Id: If6718276ee4f2ef131825d1524dfdb02a3793aed

Change-Id: I4fceefe76b14bd38a358dc4356708f7981bab339

Using surrounding reconstructed pixels from left and above to select
best matching mv to use as reference motion vector for mv encoding.

Test results:
       AVGPSNR  GLBPSNR VPXSSIM
Derf:  1.107%   1.062%  0.992%
Std-hd:1.209%   1.176%  1.029%

Change-Id: I8f10e09ee6538c05df2fb9f069abcaf1edb3fca6

Merged in the high_precision_mv experiment to make it easier
to work on new mv encoding strategies. Also removed
coef_update_probs3().

Change-Id: I82d3b0bb642419fe05dba82528bc9ba010e90924

Set on all 16x16 intra/inter modes

Features:
- Butterfly fDCT/iDCT
- Loop filter does not filter internal edges with 16x16
- Optimize coefficient function
- Update coefficient probability function
- RD
- Entropy stats
- 16x16 is a config option

Have not tested with experiments.

hd:     2.60%
std-hd: 2.43%
yt:     1.32%
derf:   0.60%

Change-Id: I96fb090517c30c5da84bad4fae602c3ec0c58b1c

Allows for swtiching/setting interpolation filters at the MB
level. A frame level flag indicates whether to use a specifc
filter for the entire frame or to signal the interpolation
filter for each MB. When switchable filters are used, the
encoder chooses between 8-tap and 8-tap sharp filters. The
code currently has options to explore other variations as well,
which will be cleaned up subsequently.

One issue with the framework is that encoding is slow. I
tried to do some tricks to speed things up but it is still slow.
Decoding speed should not be affected since the number of
filter taps remain unchanged.

With the current version, we are up 0.5% on derf on average but
some videos city/mobile improve by close to 4 and 2% respectively.
If we did a full-search by turning the SEARCH_BEST_FILTER flag
on, the results are somewhat better.

The framework can be combined with filtered prediction, and I
seek feedback regarding that.

Rebased.

Change-Id: I8f632cb2c111e76284140a2bd480945d6d42b77a

The following five experiments are merged:

newentropy
newupdate
adaptive_entropy (also includes a couple of parameter changes
                  that improves results a little
                  in common/entropymode.c and encoder/modecosts.c
                  that were not merged from the internal branch)
newintramodes
expanded_coef_context

Change-Id: I8a142a831786ee9dc936f22be1d42a8bced7d270

Although it can be useful, in some cases it causes artifacts in motion-
based content.

Change-Id: I27bb80901020c40636e2018a8217759175a23f5b

this commit removes a number of experiment options from configure
script. the associated experiments are already fully merged, the
options in configure script have no effect at all.

Change-Id: I8054ccaee0a04610162ed76ac9e59c4538217113