Change-Id: I2d32d46002cb92c63050c2b8328865c406103621

Function set_mb_row() and set_mb_col() do similar work and are always
called together, this commit merged them into a single function for
clarity and easy maintainence.  This was a TODO item.

Change-Id: I956bd9ed6afb8b2b0469b20fd8bc893b26f8a0f3

Move rectangular superblock coding out of experimental list.

Change-Id: I96c37547d122330d666a67b4bf577ae54547857f

This commit enables selecting probability models for recursive block
partition information syntax, depending on its above/left partition
information, as well as the current block size. These conditional
probability models are reasonably stationary and consistent across
frames, hence the backward adaptive approach is used to maintain and
update the contextual models.

It achieves coding performance gains (on top of enabling rectangular
block sizes):
derf:   0.242%
yt:     0.391%
hd:     0.376%
stdhd:  0.645%

Change-Id: Ie513d9673337f0d27abd65fb566b711d0844ec2e

Also some further simplification following removal
of top node code.

There is an issue in regards to the shared file vp8cx.h
in regard to the roi_map as this interface assumes that
there are only 4 segments. I have left the value here as
4 for now meaning that the roi_map interface is broken
for VP9.

Note that this change would have been easier if I hadn't
had to search for hard wire instances of the number 4
and <= 3.

Change-Id: Ia8b6deea4be4dbd20deb1656e689dd43a5f190e8

Lookup the data per-plane from the MACROBLOCK struct.

Change-Id: I9253c4d3cf886aa9ab4aeab23a2156bfcf994ede

This commit moves the coeff storage from the MACROBLOCK struct to its
per-plane part. The next commit will remove the coeff member from the
BLOCK structure so that it is consistently accessed per-plane.

Also refactors vp9_sb_block_error_c and vp9_sb_uv_block_error_c to be
variable subsampling aware.

Change-Id: I18c30f87f27c3a012119b6c1970d5fa499804455

This commit enables rectangular block prediction of compound
inter-intra mode. It combines the mb/sb32/sb64 prediction functions
into a unified version with configurable block width and height.
This fixes the enc/dec mismatch of the codebase when
comp-interintra-pred is enabled.

Change-Id: I1d0db2f1f184007802df04fcd12b9dadb3189ff0

Change-Id: I54acef342b8e787e05af0febd7cf0d7d10288383

First in a series of commits making certain MACROBLOCK members
addressable per-plane. This commit also refactors the block subtraction
functions vp9_subtract_b, vp9_subtract_sby_c, etc to be
loops-over-planes and variable subsampling aware.

Change-Id: I371d092b914ae0a495dfd852ea1a3d2467be6ec3

Continue moving framebuffers to per-plane data.

Change-Id: I237e5a998b364c4ec20316e7249206c0bff8631a

This patch does not seem to give any benefits.

Change-Id: I9d2b4091d6af3dfc0875f24db86c01e2de57f8db

Adds an experiment that codes an end-of-orientation symbol
for every eligible zero encountered in scan order.

This cleans out various other sub-experiments that were part
of the origiinal patch, which will be later included if found
useful.

Results are slightly positive on all sets (0.1 - 0.2% range).

Change-Id: I57765c605fefc7fb9d1b57f1b356843602abefaf

First in a series of commits moving the framebuffers pointers to
per-plane data, so that they can be indexed numerically rather than
by name.

Change-Id: I6e0d60fd4d51e6375c384eb7321776564df21775

Removed some unused legacy code relating to GF activity.

Change-Id: I0b0fe90a1a5208aaa81d7393ba6cf75ab412dbda

Remove the unnecessary _s_ from their names, and add a new
vp9_recon_sb() that calls the y and uv variants.

Change-Id: I7ffaa5ff5605a8472cac2a53de8cf889353039a6

This experiment has failed to give much benefit but
does add complexity so deprecated.

Change-Id: Ic7b929ba706390b9907ef0b4f965bd401ca799a4

void __attribute__((noinline)) hi(void) { }
Causes build failure in VS2008

Change-Id: Ie2f2a09d90bd5502c492e4d9f4983532a0edbc01

Change-Id: I183ec5819d4d80966c92db36db75b8c3be0d381d

Use in-place buffers (dst of MACROBLOCKD) for  macroblock prediction.
This makes the macroblock buffer handling consistent with those of
superblock. Remove predictor buffer MACROBLOCKD.

Change-Id: Id1bcd898961097b1e6230c10f0130753a59fc6df

Adds RD integration for 32x16, 16x32, 64x32 and 32x64 rectangular blocks.
Derf almost +0.6%, HD a little over +1.0%, STDHD +1.3%.

Change-Id: Id651fdb6a655fdbb5c47009757e63317acfb88a5

Enable recursive partition information coding from SB64X64 down to
MB16X16. The bit-stream syntax is now supporting rectangular block
sizes. It starts from SB64X64 and recursively describes the partition
type of the current block. If the partition type is PARTITION_NONE,
the block is coded as a single unit; if it is PARTITION_HORZ or
PARTITION_VERT, the block is segmented into two independently coded
rectangular units, with no further partition needed; otherwise, the
block is segmented into 4 square blocks. i.e., PARTITION_SPLIT case,
each can be potentially further partitioned.

Forward adaptive probability modeling is used for the partition
information coding, conditioned on the current block size.

Change-Id: I499365fb547839d555498e3bcc0387d8a3587d87

New names are y_dc_delta_q, uv_dc_delta_q, uv_ac_delta_q.

Change-Id: I4acae1fc23a4697ce2c5a5becb8dc28ef0a4b552

This flag was added to VP8 to allow a mode where MB-level skipping
was not allowed, saving a bit per mb. It was never used in practice,
and hasn't been tested in VP9, so remove it.

Change-Id: Id450ec6904c6d06c1919508e7efc52d05cde5631

Using regular 0 and 1 constants now.

Change-Id: Ie763503cbb727847cc8f1d6506cd6f2ee607f056

Combine superblock inter predictors into a unified function that
allows configurable block width and height. The inter predictions
of block sizes smaller than 16x16 are handled differently. To be
continued on merging them later.

Change-Id: I14075959dd5e221f00c205c99ca35c1c31ef728e

So it is consistent with I8x8_PRED.

Change-Id: Iefa65124b2419690d83e526c611129c0ede29d11

The probabilities derived from these statistics are used in bitstream
writing; therefore, we should only do this when we actually decide to
use macroblock coding (over superblock coding). Derf gains +0.15%.

Change-Id: I196814c070a7c79889590658ce10a6eb07454389

The intra predictor supports configurable block sizes. It can handle
intra prediction down to 4x4 sizes, when enabled in BLOCK_SIZE_TYPE.

Change-Id: I7399ec2512393aa98aadda9813ca0c83e19af854

Rename pick_mb_modes to pick_mb_mode, since it now handles only a
single macroblock. This is consistent with pick_sb_mode handling a
single non-macroblock.

Change-Id: I896fdfa06436b2d8c24d6474718cc74420df6b3b

It is write-only.

Change-Id: I2412344688d96593cc01c038e7f51410d0f85ed0

Use sb-common version instead.

Change-Id: If2552b5a39fd2e5272f66a41c5667dda85fd3939

Change-Id: Iad69e7a3b7e470acf6094f6a52e7da69066fd552

Change-Id: I87a406fcd18ab043253ca0c009d1182fdc5c3046

Merge various super_block_yrd and super_block_uvrd versions into one
common function that works for all sizes. Make transform size selection
size-agnostic also. This fixes a slight bug in the intra UV superblock
code where it used the wrong transform size for txsz > 8x8, and stores
the txsz selection for superblocks properly (instead of forgetting it).
Lastly, it removes the trellis search that was done for 16x16 intra
predictors, since trellis is relatively expensive and should thus only
be done after RD mode selection.

Gives basically identical results on derf (+0.009%).

Change-Id: If4485c6f0a0fe4038b3172f7a238477c35a6f8d3

Merge sb32x32 and sb64x64 functions; allow for rectangular sizes. Code
gives identical encoder results before and after. There are a few
macros for rectangular block sizes under the sbsegment experiment; this
experiment is not yet functional and should not yet be used.

Change-Id: I71f93b5d2a1596e99a6f01f29c3f0a456694d728

This is a VP8-only feature (part of profile 3) that is unsupported in
VP9.

Change-Id: I78016eede8d9c834d44d4c517f3e8b8fc2a378b1

Renaming sb32_coded to prob_sb32_coded and sb64_coded to prob_sb64_coded.

Change-Id: I6de5cad00a57c3e066d53467f8c38cb6073dce11

The patch adds the flexibility to use standard EOB based coding
on smaller block sizes and nzc based coding on larger blocksizes.
The tx-sizes that use nzc based coding and those that use EOB based
coding are controlled by a function get_nzc_used().
By default, this function uses nzc based coding for 16x16 and 32x32
transform blocks, which seem to bridge the performance gap
substantially.

All sets are now lower by 0.5% to 0.7%, as opposed to ~1.8% before.

Change-Id: I06abed3df57b52d241ea1f51b0d571c71e38fd0b

Crash fix only. No functional change or testing.

Change-Id: I0c6d114d024c29fc11ae61666f5938f11b01dd6a